Question about Senco & Frame Pro 601 Framing Nailer

Open Question

Senco 601 nailer diagram - Senco & Frame Pro 601 Framing Nailer

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 142 Answers

SOURCE: Senco 601 nailer shoots 2 nails each time the trigger is pulled.

the 601 had a design flaw, in the nose, where the nails hit as the are being pushed forward, the peice was made out of a peice of metal that was too soft, it wore down and that is where you get the double nail problem.

Senco offered a trade in, this was years ago, for a limited time and gave us credit towards new guns, which we gladly did

Posted on Dec 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Senco pro frame 601 just blows air when trigger is pulled


Senco nailers are mostly not lubricated but moisture and dirt do they have the neck compressor not tapped in time and then inside the top cover of this tools can have that or the parts are hanging can not move freely and clean, solvent them out and grease it with silicon OKS1110 Kluber Silubrin or Dow Corning DC4 in most cases the models of Senco are oilless IF the seal of the piston is made out of kevlar instead of a plain o-ring .

Jan 20, 2014 | Senco 1G0003R FactoryReconditioned...

1 Answer

Senco 601 plunger sticks when unplugging air line


The piston stop in the head is supposed to grab and hold the piston - I don't believe that is your issue. The problem I think you are experiencing is the head valve not moving freely up and down. There is a funny looking spring under the head valve to push it back - often these get weak or broken causing the head valve to jam.http://senco.com/Documents/Guides/FP601_PC.pdf
Part # KB4393
I would purchase the repair kit #YK0360 which includes this spring - clean and lubricate the tool as you reassemble.

Nov 27, 2013 | Senco & Frame Pro 601 Framing Nailer

1 Answer

What degree nails


Hi, Senco 601's use a 34 Degree Strip nail. Easiest way to remember is this when thinking of Senco strip nailers:
601 and 651 are 34 Degree clipped head nails
602 and 652 are 20 Degree FULL round head nails

www.collatedfasteners.co.uk

Mar 17, 2013 | Senco & Frame Pro 601 Framing Nailer

1 Answer

What angle nails are used in a frame pro 601 senco


The Senco Frame Pro 601 uses 34 degree clipped head nails.

Nov 23, 2010 | Senco Tools & Hardware - Others

1 Answer

Senco 601 nailer shoots 2 nails each time the trigger is pulled.


the 601 had a design flaw, in the nose, where the nails hit as the are being pushed forward, the peice was made out of a peice of metal that was too soft, it wore down and that is where you get the double nail problem.

Senco offered a trade in, this was years ago, for a limited time and gave us credit towards new guns, which we gladly did

Dec 31, 2009 | Senco & Frame Pro 601 Framing Nailer

1 Answer

My senco frame pro 650 has an air leak and is evident from the exaust port when sitting idle. Is there a gasket kit available? How do I diagnos where the leak is originating? Thanks


Its not gaskets it is ''o'' rings its not always that apparent with orings so you order in a oring kit and replace all orings pay attention with your triger orings as they are very small i suggest you get a white board and lay all components out in order of removal they are pretty staight forward in there no springs or nastey supprises Oring kit normally has exploded diagram of gun and how it goes together

Apr 04, 2009 | Senco & Frame Pro 601 Framing Nailer

Not finding what you are looking for?
Senco &  Frame Pro 601 Framing Nailer  Logo

Related Topics:

49 people viewed this question

Ask a Question

Usually answered in minutes!

Top Senco Tools & Hardware - Others Experts

John Trevino

Level 3 Expert

1383 Answers

John Bowen

Level 2 Expert

341 Answers

Matt Olenzek
Matt Olenzek

Level 2 Expert

293 Answers

Are you a Senco Tool and Hardware - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...