Question about Samsung TV Remote Control

4 Answers

Ah59-02342a doesn't control tv anymore

It controls the bd player but not the tv. But the tv remote works fine. The tv is 3 months old and the remote used to control both. Plzzz help

Posted by Anonymous on

Ad

4 Answers

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Hi I had exactly the same problem with mine it worked the DVD player fine but not the TV even though previously it had worked both .......... Manual Guide In the manual guide I managed to dig out it says to do the following to set up the remote to work the TV

Press the TV button on the remote
Then whilst holding down the power button you need to enter in the samsung TV codes until your TV turns off (I only got to the first and it did it)
The numbers are 00, 15, 16, 17, 40, 43, 46, 47, 48, 49, 59, 60, 98

Hope this helps

Posted on Sep 06, 2012

  • Joanna Drake
    Joanna Drake Dec 13, 2014

    worked with 00!!! thank you my life saver :)

×

Ad
  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

You have to switch the remote to TV mode. Keep the remote pointed at the TV as the turn. Hold down the power button to enter the codes one by one for Samsung: 00, 15, 16, 17 and 40 If the TV turns on or off and that's all. Good luck Roberto32

Posted on Feb 14, 2013

  • Richard
    Richard Jul 07, 2014

    Thank's all Ok now

×

Ad
  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Cheetah:

    An expert who has answered 20 or more questions within one hour.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Samsung Expert
  • 74 Answers

Remove the batteries! without the batteries, press and hold the power button for 1 minute and 30 seconds,and put a new fresh batteries.

Posted on Dec 27, 2014

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

That's weird, I own a samsung remote and a samsung TV, and sometimes a different mode on the remote gets selected, and you have to press the "TV" button near the top, and that will instruct it to control the TV and not your third party device.

Or maybe you might need to buy another remote, I find the following source useful for buying new ones that aren't universal http://www.remotecontrolscenter.com/

Posted on Oct 05, 2012

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

SOURCE: Samsung remote control

Hey I had exactly the same problem but fixed by removing batteries and holding one button down for a couple of mins. Strange but seems to fix!

Posted on Oct 20, 2008

SOURCE: Remote control BP59-00125A

070019-s&v2930-0653

Posted on Oct 19, 2008

chipsandnuts
  • 70 Answers

SOURCE: Samsung BD-P1200 (Bluray) Remote Control stop responding

Try resetting it.
Remove the batteries and hold down the POWER button on it for 30 secs. Then replace the batteries with fresh ones.

Posted on Jul 02, 2009

  • 1 Answer

SOURCE: We have an AK59-00104R remote

To program this Samsung remote to work with a TV, press the TV POWER button on the remote while entering a manufacturer specific code into the remote at the same time.
1. Switch the TV on. 2. Point the remote towards the TV. 3. Press and hold the TV Power button and enter the two-digit code for that brand of TV. If the code is compatible, the TV will switch off. 4. There may be more than one code for that manufacturer, so try them all until one works.
For Samsung TVs, one of the following codes should work: +01 +02 +03 +04 +05 +06 +07 +08 +09

Posted on Jan 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Remote codes for samsung blu-ray


Universal Remote Control Codes List - TV SAT DVR ...

removeandreplace.com/2013/11/10/universal-remote-control-codes-list/
Nov 10, 2013 - We recently bought a universal remote control for an extra bedroom and ... To control a Samsung Blu-Ray DVD player with an RCA universal ...

3 Digit Universal Remote Codes For DVD ' Codes For ...

codesforuniversalremotes.com/3-digit-universal-remote-control-codes-d...
... of the 3 digit device codes for DVD and Blu-Ray 3 Digit Universal Remote Control Code List ... Need 3 digit remote code for samsung blu ray player BD-J5100.

Support - Blu-ray Players BD-H6500 ' Samsung Home Audio

www.samsung.com > ... > Blu-ray Players

Samsung Electronics

Jan 16, 2016 | Samsung Televison & Video

1 Answer

New remote doesn't recognize TV, only BD player. can it be programmed?


The TV function on your remote probably only controls a Sharp TV

Dec 02, 2012 | Televison & Video

1 Answer

The remote doesn't work for any of the DVD functions.


1 replace the old batteries use new ones alkalines with the same mark and polarities.
2) clean the contacts batteries with c. cleaner.
3) open the remote control, and clean the keypads from dirty, oxide, corrosion, with c. cleaner.
4 Proceed again, if the problem persist, you must go to the repair shop TV or replace by new ones.
God bless you

Nov 11, 2012 | Televison & Video

1 Answer

The remote doesn't work on my toshiba tv zp38


Check the infrared emission from the remote control first. If it is found OK, repalce the infrared sensor inside your tV.
To get more details about how to check the remote control, get into this blog.
'electronicshelponline[dot]blogspot[dot]com
Named 'Electro-Help'

Apr 09, 2012 | Toshiba 32AF42 32" TV

1 Answer

What's your problem? The remote control


Tv not compatible to the VCR perhaps I press wrong button on the remote control

Feb 19, 2012 | Samsung BD-P1400 Blu-Ray Player

2 Answers

Just received a Samsung BR BD-P1500 2009 model, as a gift. No one code for the remote control work for my Panasonic Viera TC-L37D2 bought in 2010. Samsung "assistance" told me that my BR is too...


Unfortunately, Samsung tech support was accurate. Most universal remotes (and the portion of the remote programming to control other devices is the same program) only have codes for devices released 6 months or more before the remote was programmed.

However, any universal remote that is newer than the TV (by that 6 month programming period) should control both devices. Low end universal remotes may not support all of the features of either the TV or the Blu-ray player. The remotes that can be programmed via a USB connection to a computer are the fastest to set up. (Alternatives: You can use both remotes when watching a movie or get a Viera link Blu-ray player that is compatible with the TV. For the second option, you need a device with the HDAVI Control (not above Control 5) connected via a good HDMI cable)

I wish that I had better news.

Cindy Wells

May 08, 2011 | Samsung BD-P1590 Blu-Ray Player

1 Answer

Do you know the dvd code for samsung dvd-hd870? My bose v30 system is asking for a dvd code in order to synchronize the remote control.


send an email to bose support. i sent 1 email with 3 products (tv, bd-player, dishnetwork receiver) that I couldn't find in the setup screen. I got 1 email back and all are up and running - 48 hour turn around on email. had to use IR emitter on bd-player to get v30 to see it. I have samsung bd-p4600.

Oct 12, 2009 | Bose RC-18S Remote Control

2 Answers

Bdp s350 sony bluray player.


I would just like to add that I have a Sony BDP-S500 player and a Sony TV.

The Sony TV's remote was preprogrammed to control the Bluray player, which i discovered by accident, so I didn't have to mess with universal remote control codes or anything.

Hope that helps.

Jun 17, 2009 | Sony BDP-S300 Blu-Ray Disc Player

1 Answer

SAM BD-P1500 Remote won't work with Sharp LC-32D43U


If you are trying to use the remote that came with the dvd player you most likely can't get it to work with the TV. If it IS in fact a universal remote, then you need to check the codes that come both with the tv and with the remote. Post back with any more questions or info for further help. Thanks for choosing Fixya!

Jun 05, 2009 | Samsung BD-P1500 Blu-Ray Player

1 Answer

LCD LG TV 37LG50 / Samsung bd-p1500 blue ray player


644 works with the Samsung BD-P1590/BD-P1590C/BD-P1600 om my Blue Button Dish Remote for the 722k.

Dec 28, 2008 | Televison & Video

Not finding what you are looking for?
Samsung TV Remote Control Logo

1,560 people viewed this question

Ask a Question

Usually answered in minutes!

Top Samsung Televison & Video Experts

The Knight
The Knight

Level 3 Expert

74251 Answers

Henry  Thomas
Henry Thomas

Level 3 Expert

1074 Answers

Jerry Greenberg
Jerry Greenberg

Level 3 Expert

1667 Answers

Are you a Samsung Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...