- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
To change your toner first turn off the printer and unplug it from the power outlet. Then, lift the toner door. Carefully grap the toner cartridge from both ends and lift it up. Do not shake the toner as you may get dirty. Then take the new toner cartridge, remove any plastic covers and insert it in the printer. Close the toner door and start your pritner.
/* Style Definitions */
mso-padding-alt:0in 5.4pt 0in 5.4pt;
font-family:"Times New Roman";
We had purchase our Xerox Phaser 6120 printer in 2007.
Last one month is past we can’t printing our staff. We made complain
regarding the same to Sunshine Service they told us that the sensor is gone, and they say its every difficult
to get it, but they are trying to get it. Also we have spent on baying new toners
for the same which is become useless now.
Lift out imaging unit and look down and back toward you, may need flash light, and you
will see a 5" x 1/2" piece of glass. Carefully wipe it with soft cloth. Toner gets on this glass
and creates the streaks. Often means a bad toner cartridge is leaking toner.
Driver could be corrupt. Disconnect the printer or at least be sure it is turned off.
I'd do both and reinstall the CD software program that came with
the printer. When the software program asks you to connect the
printer to the USB port, do so and it should again work properly.
Hope this helps. Bud