Question about Projection Televisions

1 Answer

I saw your post about your HLP5063W

Comment by jtcarr1228, posted on Jun 26, 2008

I am having the same problem, loud vibrating buzzing sound comming from the tv, and the picture looks distorted. I changed the lamp, because it had almost 12000 hours on it, but no difference. I am thinking its the color wheel but I am skeptical. Did you find out what was wrong with yours? if it was the color wheel did you change it yourself? thanks for ur time. My Samsung HLP5063W is almost 4 years old now and this morning the humming sound turned "grinding" sound! I immediately opened the cover from the back (put a tape on the cover switch) and saw the bulb working just fine.

I removed the bulb encasing and saw the fan located behind the encasing slot (right hand side) and the smaller fan attached to the silver holed plate encasement (left hand side) and both were not the source of the noise....

My next suspicion is the color wheel. I tried to find it. Couldn't. I Googled some sites and stumbled here.

I hope there's a tutorial here on how to replace THIS model's color wheel. I have a suspicion where it is, but it may involve complex removal of screws and pin wires to get to it. I just want a good reference to finally get on to it. I already ordered the part and I want to be ready to install it once it arrives.

Posted by on

  • Anonymous Oct 29, 2008

    I am having the exact same problems. I also took apart the entire tv and put everything back together again, but it's definately not the lamp, since i just put a new one in a week before it happened. Im looking into replacing the color wheel now. Good luck

  • Lance Lazaro
    Lance Lazaro Oct 29, 2008

    thanks for your link, but that is not the specific model for our TV. Although it has some similarities with parts, the procedure of installing is far different since the inner set-up is also different. Thanks though.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,267 Answers

Click here to find information on how to replace the color wheel on your TV.
Good Luck.

Posted on Oct 28, 2008

  • Jaime Hernandez Oct 29, 2008

    How is this Inapropriate lllazaro?

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What may cause a high pitch hum.even when muted or volume turned down?


Samsung DLP making a buzzing noise, but works fine - High Def ...

www.highdefforum.com > ... > Rear-Projection TVs

Dec 11, 2009 - 7 posts - ‎5 authors
My Samsung HLP-5063 DLP starting making a loud buzzing noise recently. ... I've only used it to watch TV for a half hour or so at a time, as I have a new LED LCD in my room. ... Other than that, I can't figure out what might be causing it. .... a humming high pitch sound, it will be an issue with the color wheel. RCA D52W25 making high pitch noise - High Def ...
5 posts
Apr 15, 2009
humming sound in my dlp - High Def Forum - Your High ...
14 posts
Nov 6, 2006
More results from www.highdefforum.com

High pitched sound coming from my Samsung DLP TV - Open Forum ...

www.dslreports.com > Forums > Social > Open Forum

DSLReports
Oct 3, 2009 - 30 posts - ‎7 authors
Its so high pitched that some people can barely hear it, but I guess I have sensitive hearing. ... Anyway, this seems to be a fairly common issue and it is caused by either the ... You're probably hearing a transformer humming.

Jan 08, 2016 | Projection Televisions

1 Answer

I have A Samsung Dlp HLP5063W that starts making a


Steady buzz, squeal, rumble is probably the color wheel bad.

Apr 12, 2010 | Samsung Projection Televisions

2 Answers

Have a Samsung hlp5063w that makes a loud buzzing/humming the entire time the set is on. Color is fine, no distortion at all and I just replaced the lamp. The buzzing stops very briefly when the channel is...


Good Day,
You have a bad COLOR WHEEL! The part number is BP96-00674A, it cost around $120.00 for the part.
It is easy to replace if you are some what handy with a screwdriver.
To replace this part is would be wise to place the TV on the floor so that you can have access to the back of TV.
1) Remove back panel (bottom portion only), about 20 screws. 2) On the right hand side is what they call the light engine, remove that.3) A couple of screws on the bottom and top. 4) Pull towards back gently, you will notice some cables will restrict movement, disconnect those cables (make note). 5) With the light engine out, the color wheel will be just to the right of the optical lense, sort of black/grayes object.
The Color Wheel is mounted with the Wheel > facing down.Disconnect the 2 cables from Color Wheel assy. 6) remove the screws (4) pull up and replace with new.
Let me know if you need any more help or how it went.

Good Luck, big IRISH.

Dec 07, 2009 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

I have the HLP5063W and a loud fan-type noise emerges for about 10 seconds after I turn the TV off (picture is still fine so far). I am now trying to handle the problem before it gets worse. Based on...


Yes,it the colors wheel and it chasis not very good fit for long period of time,must change the flaw in design in this model.Might have to change again furture of the tv.

Oct 31, 2009 | Samsung HL-R6168W 61" HDTV

1 Answer

Screen went B&W and I hear a loud humming noise from the TV...


Hi John,

If you are hearing this noises,that's your Color Wheel.
The reason fot that is because your color wheel spins 5000rpms(revolution per minute) and something that modifies the balance if the disc can cause different things.Unfortunately in order to check if your color wheel is working properly you need to open your TV and physically check out.

Grinding= Most probably the color disc is broken and you need to replace it.

Spinning / Buzzing = The bearing of the wheel is loose and is loosing its balance,eventually it will brake.

The best thing to do is to take the color wheel out and spin it ,if you feel that the disc kind of wobbles or doesn't spin smoothly you have to replace it.

You can check DM they have very good prices

http://www.discount-merchant.com/SearchResults.asp?Search=samsung%20color%20whee l?click=52978
I hope this will help,please keep us posted

Oct 05, 2009 | Samsung HL-P5063W 50" Rear Projection HDTV

1 Answer

I have a Samsung HL-P5063W. Once it warms up there is a loud buzzing noise coming from insude the rear of the TV. The fan is running all the time. lamp is about a year old.


Your symptoms sounds like the set may have a damaged color wheel.

It is also possible that you have a noisy fan, but they don't get very loud.

I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jun 30, 2009 | Samsung Projection Televisions

1 Answer

Turbine/moaning sound and vibration


Hello,
The grinding sound that you are hearing is your color wheel. They can make a noise from a buzz to a power saw type of noise. Usually the set will continue to play with the noise, but it is annoying. You will need to replace the color wheel now.

This is not as easy as the lamp replacement, as you have to pull the light engine to access the color wheel. It is not hard just more work and be careful of the color wheel lenses.



I hope this information allows you to resolve this issue.
If I have helped you, please help me, and rate this suggestion the highest FixYa rating. (Two Thumbs Up) If you cant rate this post with the highest rating, then please comment to this post and I will try to help you further.

Jun 03, 2009 | Samsung HLP4663W 46" Rear Projection HDTV

1 Answer

Hl-r5667w


I just responded to your other post check the connection between the lamp and ballast at both ends. Also did you get the same exact lamp as your old lamp, as Samsung has two different arc gaps and they wont work if you get the other type even though they look the same physically.

Jun 21, 2008 | Samsung HL-R5677W 56" HDTV

1 Answer

Samsung 7178 buzz noise


Is this buzz from the speakers?
Is this buzz from the set itself when the sound is turned down?
Is this buzz a low pitch sound?
Is this buzz a high pich sound?
Does this buzz vary in loudness with the volume control?
Does this buzz change in level from time to time?

You should post the details and the circumstances of use in order to give some idea of the conditions.

Jerry G.

Apr 16, 2008 | Projection Televisions

Not finding what you are looking for?
Projection Televisions Logo

Related Topics:

210 people viewed this question

Ask a Question

Usually answered in minutes!

Top Projection Televisions Experts

Jaime Hernandez

Level 3 Expert

2267 Answers

matt martin
matt martin

Level 3 Expert

1191 Answers

yadayada
yadayada

Level 3 Expert

60867 Answers

Are you a Projection Television Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...