Question about Office Equipment & Supplies

3 Answers

Lexmark X1250 suddenly won't print

My X1250, very reliable the past 2 years, suddenly stopped printing in the middle of a print job, claiming a problem with the printer cartridges (authentic Lexmark brand, relatively full but have printed out a number of prior documents, color and B&W, without the slightest problem), and asks me to remove the cartridges and reinsert them, however, this does not solve the problem. (It did the first time it happened but subsequent print attempts moments later, of other documents, are not fixed by doing so.) I'm a bit under the gun, wanting to print out travel documents before packing up and relocating in four days! Any ideas? Thanks!!

Posted by on

3 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 1,879 Answers

Few things can be done due to time constraint:

>communication problem can cause that error, use another USB cable and try another USB port.

>printer software/driver uninstall, reboot then re-install

>try the printer on another computer if possible

all else fails:

>save the docs on a flash drive and have them printed outside. worry bout the printer when you get back.

Posted on Oct 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Master
  • 13,433 Answers

You may want to get your documents printed out in another computer. Most likely a hardware problem in the printheads controlling the cartridges, best to send to lexmark for repairs.

www.lexmark.com

Posted on Oct 28, 2008

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Master:

    An expert who has achieved Level 3.

  • Master
  • 538 Answers

Ok..turn off the printer..and unplug from computer..let it sit for five minutes..

Posted on Oct 28, 2008

  • A Womans Computer Man
    A Womans Computer Man Oct 28, 2008

    when you remove them..inspect the bottom where the electronic skin is..see if it is shiny or clogged..

  • A Womans Computer Man
    A Womans Computer Man Oct 28, 2008

    can you do a test page, please..and report results..

×

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Only prints first job - can't delete from que


Please try this approach instead:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.


I hope this information has been helpful.

Dec 20, 2011 | Lexmark X6170 All-In-One InkJet Printer

1 Answer

PRINTER WILL NOT PRINT THERE IS A JOB THAT WON'T CLEAR. I TRIED DELETING THE JOB AND ALL IT SHOWS IS THE JOB DELETING AND THATS WHERE IT'S STUCK


To clear the print queue from stuck print jobs, try this approach instead:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Oct 02, 2011 | Lexmark X2500 All-In-One Printer

1 Answer

I have a Lexmark S504 wireless multifunction printer. I can print a test page but a can't print anything from any application. The Windows print page window comes up and if you click OK it appears to...


It could be a printer driver issue. Please follow the steps below to fix the problem.
First, clear the print queue from any stuck print jobs. You can do the steps mention - going to Services and stop the print spooler, delete the files in the spooler folder and then restart the service.
Second, delete the existing Lexmark Interpret S405 printer driver. On your computer, go to Start menu > Programs > Lexmark > Uninstall. After the uninstall process, reboot your pc when prompted.
Third, visit the Lexmark website to download and reinstall the Lexmark Interpret S405 printer driver. Select the version of your Windows operating system. Download and execute the file. Follow the instructions on your computer screen.
After the reinstall process is successful, try to print again to verify that the problem is fixed.

Sep 07, 2011 | Lexmark Interpret S405 Wireless All-in-One...

1 Answer

Lexmark x1270, installed on new Dell, will scan/print once but print queue won't clear after printing, and further jobs just back up in queue. Once, after trying reboot, printed next doc but that was...


Try to follow the steps below to fix the problem:

1. Browse to Start -> Run... and type in NET STOP SPOOLER (this will stop the print spooler service)

2. Browse to your windows\system32\spool\PRINTERS\ folder. You should see files there ending in .SPL and .SHD created around the time you tried to print - delete these files.

3. Browse to Start -> Run... and type in NET START SPOOLER (this will restart the print spooler service)

4. Double click the printer icon in the lower-right corner of your taskbar to examine your print job queue and browse to View -> Refresh.

Aug 06, 2011 | Lexmark X1270 All-In-One InkJet Printer

1 Answer

Printer won't print. I went to printer and it says there are 9 items to br pringted in queue but they won't print Printer says it is ready


Good Day Nanawhit!

That happens all the times when first print job encounter a problem and stops printing and it was followed by series of print jobs. Some reasons for stop printing could be a printer out of paper and printer not set as default printer.

The best way to fix it is to cancel all pending jobs. When print jobs window is cleared off pending print jobs, restart your PC and your printer. Then go to your printer and make sure it is the default printer.

After that try printing a test page. Once a test page is successful, you can now print as many as you want.

Jun 10, 2011 | Lexmark X2670 All-In-One Printer

1 Answer

LexMark 3350 Printer often stops printing in mid multi-page


If printing is stopping in the middle its not the Problem with the driver
Check the Spooling Properties
Checked Printing Test Page

Jan 06, 2010 | Lexmark X3350 All-In-One InkJet Printer

1 Answer

Lexmark 1150 suddenly stopped printing


does only the green light flashes or it is accompanied by the other light if so you may have run out of ink try checking your ink level

Nov 20, 2009 | Lexmark X1150 All-In-One InkJet Printer

1 Answer

The printer suddenly stopped printing in the middle of a job. Now whenever i try to print it says job waiting and when i try to delete the current prints it says deleting but stays on saying that and...


Hi,

The unit may have a paper jam or stuck object inside, if you have experience a paper jam error before, check the printer for any object or paper stuck inside, clean roller.

Some error like this can be a problem on the feeder sensor and by this time you may need to replace and repair the unit.

Hope this initial info helps

Oct 05, 2009 | Lexmark Z640 InkJet Printer

1 Answer

Middle of print job - stops to CLEAN - then starts from pg1 AGAIN


This is a simple 3 step fix

a) Get rid of printer
b) Get rid of husband
c) Get new printer

Hope this works!! :-)

Jul 16, 2009 | Brother MFC 210C All-In-One InkJet Printer

1 Answer

Paper sensor, I think


check the cable first..and do a test page, if you can without the printer connected to anything.

then, if that all works, we can look elsewhere, no?

Mar 06, 2008 | Lexmark Color JetPrinter Z23 InkJet

Not finding what you are looking for?
Office Equipment & Supplies Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Office Equipment & Supplies Experts

kakima

Level 3 Expert

98694 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

yadayada
yadayada

Level 3 Expert

63291 Answers

Are you an Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...