Question about Makita Saws
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: Table Saw blade
Did you remove the center plate? It has to come out before you can remove the blade. Also make sure that the saw is unplugged before you go any further. If you still have questions contact me and I will do what I can. Also if you would like you can download a schematic of this tool at Makitatools.com just type in your model and look at the schematic. Good luck
Posted on Jan 03, 2009
SOURCE: Blade falls out.
the lever for the lock has a indentation in it to lock the blade in place (at 90 or 180 degrees try both) make sure it drops into same in blade. not all brand blades will fit even with the word universal! good luck
Posted on May 08, 2009
Is this it? If not, go to Makita site & download image of your saw. Hope this helps:http://www.makita.com/en-us/Assets/images/Products/_PartsBreakdowns/PB_LS1214FL.pdf
Posted on Jul 06, 2009
Look at the pivot point on the rear of the miter saw for the push/pull locking pin. The pin is there so you can lock the saw in the down position for easier carrying. To unlock the saw, simply pull the locking pin out (Makita calls this the "stopper pin"). Then you can use the saw and easily raise and lower it for cutting.
As you might find it helpful to have, I have included a link from the Makita web site for a free copy of the owners manual that you can print or save for future use and reference. It has some handy info on use and care of your saw.
Hope you find this Very Helpful and best regards!
Posted on Sep 20, 2009
Tips for a great answer:
May 26, 2016 | Dewalt Saws
Dec 15, 2015 | Makita Jr3000vt Reciprocating Saws
Jun 01, 2014 | Dewalt DW304PK reciprocating saw kit with...
Dec 29, 2012 | Makita Jr3000v Reciprocating Saws
May 13, 2010 | Makita JR3050T Recipro Saw 9 Amp
Apr 03, 2010 | Makita 4390D 9.6 Volt Ni Cad Cordless...
Nov 06, 2009 | Makita JR3050T Recipro Saw 9 Amp
73 people viewed this question
Usually answered in minutes!