Question about NetGear Computers & Internet

1 Answer

Lost password for netgear router - NetGear Computers & Internet

Posted by on

Ad

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • NetGear Master
  • 32,281 Answers

To RESET the Netgear, power up the Netgear then press andhold the RESET button at the back of the router until all the LEDs flash.Connect a LAN cable from the Netgear to the LAN port on yourcomputer, open a browser and enter the Netgear configuration URL -
http://192.168.0.1
The default login = admin
The default PW = passwordYou can now change the default admin password and configurethe wireless settings.
Go to the wireless configuration and set up the SSID and WPA or WPA2encryption.
Apply these settings to the wireless card in your laptop/computer.
To secure your wireless network from unauthorized access, please click on thislink and follow my instructions :-http://www.fixya.com/support/r3559128-wireless_router_security

Posted on Feb 25, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
kap990
  • 28 Answers

SOURCE: lost key for netgear GT834PN

Do one thin connect ethernet cable between ur router and laptop open internet explorer and tyoe in this address 192.168.0.1 and press enter user name and pssword admin and password in lower case press ok router page will open up then click wireless settings on the left and on the right side right at the bottom of the page u will find key1 as ur wep key

Posted on Jun 03, 2008

mattozan
  • 555 Answers

SOURCE: cannot get password authorisation for netgear router

The default username and password for the Netgear DG834G router is:

username: admin
password: password

If that does not work (i.e., the default password has been changed), then the only way for you to log into the router is to restore the router back to its default factory settings. Then you will be able to use the default username and password above.

To restore the router's factory default settings, you must use the Default Reset button on the rear panel of the router.
1. Press and hold the Default Reset button until the Test LED turns on (about 10 seconds).
2. Release the Default Reset button and wait for the router to reboot.

Posted on Apr 03, 2008

  • 32 Answers

SOURCE: I lost my password to login to my wireless router

RESET TOTALLY UR WIRELESS THE INSTRUCTIONS R IIN THE MANUALS

Posted on Nov 29, 2009

  • 355 Answers

SOURCE: lost password for netgear router wnb834b

Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:

  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Posted on Apr 20, 2010

router-user
  • 550 Answers

SOURCE: i lost the password for my netgear router and

Are you looking for the wireless network key or password ?
Is there any computer online using the router.
If not then you will need to connect the computer to the router.
If yes then you can open the router set up page on that computer.
router set up page is the page where you can check all the router settings.
You will find the wireless network key or password on the set up page of the router.

Click Here for step by step instructions

Posted on Sep 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Can not remember password


If you have lost your password check the Customer Support from the website you have lost it from. If it is your router password, it should be on the back the router. Hope this helps.
- Nathan

Feb 03, 2014 | Western Digital WD My Net N600 - wireless...

1 Answer

Crack password online


Restoring a Netgear Router to Factory Default Settings

Symptoms:
Cannot access the NETGEAR router or access point web interface login screen, or

You have forgotten/lost the password to log into the NETGEAR router or access point (NOTE : This refers to the password required to access the devices administrative interface. If you have forgotten the password required to access the wireless network, you should refer to this article instead).

http://kb.netgear.com/app/answers/detail/a_id/9665/~/restoring-a-netgear-router-to-factory-default-settings

Sep 16, 2013 | NetGear Computers & Internet

2 Answers

Lost router password


Default user names:

  • All Netgear routers: admin
Default passwords:

Sep 21, 2012 | NetGear Computers & Internet

1 Answer

We lost our password. Wanting to reset the password


A forgotten or lost router password cannot be recovered. It can only be reset by hard resetting the router. ....read more to reset password

Aug 31, 2012 | NetGear RangeMax WPN824 Router

1 Answer

I need my netgear password


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Reset and Restore the NETGEAR device to Factory Default Settings

Symptoms:

  • Forgotten/lost password to log into the NETGEAR device
  • Cannot access the NETGEAR device web interface
Click here for video walk through example of how to reset the WGR614v9 router.
video-icon2.jpg

Resolution:

If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

When a NETGEAR device resets, it goes back to the state when it was new - all information that was entered by hand is lost! Examples include critical things you need to get online, such as ISP username, ISP password, IP addresses, wireless security keys, and ports and services that were opened. It all needs to be re-entered.
So, have your ISP information before resetting the router.
Naturally, if you moved to a new city, or if you bought a used router, the old information in the router may not be of use to you. Contact your ISP if you can't connect any computer directly to the Internet. Then, if there is a connection problem when the router is added, see No Internet Access Through the Router
Reset for most routers with a reset button on the rear panel
Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)
  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password. If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.
  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.
For DGN2000 / DG834Gv5 Routers
To restore the factory default configuration settings when you do not know the login password or IP address, press both the Wireless button and WPS button on the side of the modem router for 5 seconds.
For FR314, FR318, and FV318
These routers require reloading the firmware in order to recover from a lost password. Download the most recent firmware from NETGEAR's Web site before proceeding. Follow the instructions in the manual.
For routers with a 9-pin manager port on the rear panel: RT314, RT311, RM356, RT328, RT338, RH340, and RH348
See Updating Router Firmware That Uses a Manager Port.

Here is a small video that shows you how:

http://kbserver.netgear.com/media/flash/training/Troubleshooting/NG_WGR614V9Router_TS_LostPassword.html

Good luck.

Mar 10, 2011 | NetGear WNA1100 Wireless-N 150 USB Adapter...

2 Answers

Sorry but i forget my password


The default user name for this model router is admin and the default password is password. The default SSID is NETGEAR. You can verify your router settings by going to Click the wireless settings link and verify that the router settings are the same as those in the wireless computer. NOTE: The settings are case-sensitive - NetGear will not work in place of NETGEAR.
If you have any additional questions contact me by clicking on the "Add a comment" link located under your problem description on FixYa. Also, if you believe that this information was helpful to you, please return to the FixYa website and rate my response to your question.
Best regards,
Yavacotech

Jan 24, 2011 | NetGear WGR614 Wireless Router

2 Answers

Cannot connect wireless device to netgear router lost password


when you try to log in to your router I assume it aske for a user name and password. If that is the case, then in the user block type in : admin
and for the password, type in : password

these are the default logins for most netgear routers, other brands have other defaults.

I had to use these myself, as I have a netgear router as well.

I hope this info offers you some assistance.

Jan 07, 2011 | NetGear WNR2000 Wireless Router

1 Answer

Forgot my security passphase shirleywilt1@gmail.com


Reset and Restore the NETGEAR device to Factory Default Settings


Symptoms:

  • Forgotten/lost password to log into the NETGEAR device
  • Cannot access the NETGEAR device web interface

Resolution:

If you have changed the default password and have forgotten the password, you may need to reset the NETGEAR device to factory default settings.

When a NETGEAR device resets, it goes back to the state when it was new - all information that was entered by hand is lost! Examples include critical things you need to get online, such as ISP username, ISP password, IP addresses, wireless security keys, and ports and services that were opened. It all needs to be re-entered.

So, have your ISP information before resetting the router.

Naturally, if you moved to a new city, or if you bought a used router, the old information in the router may not be of use to you. Contact your ISP if you can't connect any computer directly to the Internet. Then, if there is a connection problem when the router is added, see No Internet Access Through the Router

Reset for most routers with a reset button on the rear panel

Write down configuration information such as IP addresses, security keys, opened ports and services, etc., that you modified. (The default username is admin and the password is either password or 1234. Try these before resetting the router.)

  1. Press the reset button on the back until the test light blinks. This takes about 10 seconds. (To avoid accidental resets, the small button is recessed. Use a pen or paperclip to access it.)
  2. Release the button.
  3. Wait for the router to reboot.
  4. Log in with the default password.

    If the router configuration was not cleared, try these additional steps AFTER the router has finished rebooting.

  5. Unplug the router's power.
  6. Press and hold the reset button. While the button is held down, reconnect router's power.
  7. Continue to hold the reset button for 20 seconds after reconnecting the power.
  8. Wait for the router to reboot.
  9. Log in with the default password.

For DGN2000 / DG834Gv5 Routers

To restore the factory default configuration settings when you do not know the login password or IP address, press both the Wireless button and WPS button on the side of the modem router for 5 seconds.

For FR314, FR318, and FV318

These routers require reloading the firmware in order to recover from a lost password. Download the most recent firmware from NETGEAR's Web site before proceeding. Follow the instructions in the manual.

Oct 30, 2010 | NetGear Computers & Internet

2 Answers

I lost my password and lost the WGT624 installation CD, how can i get the router to work on a new laptop


If you have lost the password to access the router page then you have to reset the router

Ensure that you have all the details regarding your internet connection before resetting the router

If you reset the router you can run the smart setup wizard and get connected by entering correct information in all the pages of the wizard

If you are looking for the wireless password:
--------------------------------------------------------------
Access your router page ( Open Internet Explorer --> Type 192.168.1.1 and enter it--> Login name(default)-admin, Password(default)-password) --> GO to wireless settings,under Wireless settings you will find the wireless password.

Jan 17, 2010 | NetGear WGT624 Wireless Router

1 Answer

Lost key for netgear GT834PN


Do one thin connect ethernet cable between ur router and laptop open internet explorer and tyoe in this address 192.168.0.1 and press enter user name and pssword admin and password in lower case press ok router page will open up then click wireless settings on the left and on the right side right at the bottom of the page u will find key1 as ur wep key

Jun 01, 2008 | NetGear WGR614 Wireless Router

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

265 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18394 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...