Question about HP VECTRA VLI8 P3 Motherboard (KZM6120)

2 Answers

ECS MCP61PM-HM SPDIF Header

The header has three pins; trying to locate the spdif pin and ground pin.

Posted by on

  • Sameerh Feb 28, 2009

    I have the same question

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 3 Answers

Diagram at HP support forum sows board and labels for connectors.
http://h30434.www3.hp.com/psg/board/message?board.id=HardwareDPC&message.id=87&query.id=879674

Posted on Mar 25, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Hi i want AMD MCP61PM-HM Drivers for Need.
So please kindly send the web address.

Posted on Mar 16, 2010

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need a wire diagram for a Gateway Mother board MCP61PM-GM


Carole,

The front of the computer is the Front Panel.
The area of contact pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

Would this be what you require, or more extensive?

From a fellow FixYa expert,

http://www.fixya.com/support/t614458-hp_mcp61pm_hm_motherboard_diagram


I know it states MCP61PM-HM
The 10-pin ( actually) Front Panel header, is the same across the board, for ECS motherboards.

For additional questions please post in a Comment.

Regards,
joecoolvette

http://www.playtool.com/pages/psuconnectors/connectors.html

Oct 09, 2012 | Computers & Internet

1 Answer

I am looking for MCP61PM-HM (Nettle) 9 pin front panel power header diagram


This motherboard Adam?

http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&docname=c00906137

Can't help you.









OH, I'm just KIDDING!

The front of your computer is the Front Panel.
The area of pins on the motherboard, that the main wires from the Front Panel go to, is the Front Panel header.

On the motherboard the Front Panel header is marked as PANEL1.
Scroll the page down, until you come to Motherboard layout.
Click on the + sign to the left of it.

Shows an illustration of the motherboard.
Bottom/Right corner is PANEL1. The black rectangle that is sitting vertically, in the motherboard photo.

Motherboard installed in computer case, the Front Panel header is two columns of contact pins.
FOUR on the Right side, FIVE on the Left side.

I don't know the actual numbering of the pins, so I'm going to number them myself;

Starting on the Left side at the Top, going down,
Pins 1, 3, 5, 7, and 9.

Starting on the Right side at the Top, going down,
Pins 2, 4, 6, and 8. There is NO Pin 10.

A) Pins 1 and 3 are for the HarDDrive activity LED (Light)
Pin 1 is for the Positive ( + ) wire.
If the HDD LED is dim when the harddrive is active, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used. If not, do not connect to them.

C) Pin 9 is N/C. Not Connected. It was a +5 Volt power for the factory.

D) Pins 2 and 4 are for the Power On LED (Light)
Pin 2 is for the Positive ( + ) wire.
If the Power On LED is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch.

F) NO pin 10, just a blank spot.

How to find out what wires are what, in that Front Panel harness connector?

Follow the wires from the connector, up to the Front Panel.

Front Panel removed it is easier to see where the wires go.
You can follow the color code of the wires, and see which twisted pair go up to the Power On switch.

You can also see which ones go to the Power On LED.
(Light Emitting Diode, so it is a light)

Reset switch, (IF there is one), same thing.

The only pair of wires that will be left is the HDD LED wires.
HarDDrive activity LED.

The 9-pin plug will have to be CAREFULLY cut apart. Separate the wires, AND their metal terminals. (WATCH your fingers!)

For additional questions please post in a Comment.
Regards,
joecoolvette

Jul 04, 2012 | Gateway MCP61PM-GM (4006254R) Motherboard

1 Answer

I need a wiring diagram for a GM5664


Gateway Support > Gateway GM5664 Desktop PC > Downloads and Support Documents,

http://support.gateway.com/us/en/product/default.aspx?tab=1&modelId=2734

Click on the Support Documents tab
(Drivers, BIOS, Applications, Patches, Support Documents, etc)

Click on the blue - 1015004R - Support Documents

Click on Product Views in the list.
Click on Inside View

Go back to the main page
Click on Components
Go to the heading - Motherboards

4006254R - ECS MCP61PM-GM
(AM2 processor socket, MicroATX form factor motherboard)

Gateway Support is of no further help to us. Product Views for the motherboard does not work.

ECS motherboards use a 10-pin Front Panel header, if memory serves.
One pin is not used. (Not there. Number 10 pin)

http://www.ebay.com/itm/GATEWAY-GM5664-MCP61PM-GM-MOTHERBOARD-4GB-Ram-AMD-Athlon-II-Dual-Core-3-0GHz-/360423046239?pt=Motherboards&hash=item53eae33c5f

On the above link scroll the page down, until you come to the enlarged photo of the motherboard, with - Click an Image to Enlarge - under it.
Click on the photo view all the way to the right, on the top photos.

The view shows the 4 orange SATA headers on the motherboard.
(The whitish 24-pin ATX main power cable connector, is shown at the front, with the blue IDE 40-pin header behind it)

To the left of the orange SATA headers (4) is the Front Panel header.
Black rectangular connector with 2 rows of pins.
One row has 4 pins, the other row has 5 pins.

[ The plastic front of your computer is the Front Panel.
The area of pins on the motherboard, that the wires from the Front Panel go to, is the Front Panel header ]

Finding where number 1 pin is, is the problem.
Next to the number 1 pin, and silk-screened on the motherboard, is the number 1.

Looking at the rectangular connector (Front Panel header) you will note one pin is missing. This is where number 10 pin would be.

On the opposite side, and opposite end, is number 1 pin.

The pins are numbered Odd, 1, 3, 5, 7, and 9, on the same side.
(Or row)
The pins are numbered Even, 2, 4, 6, and 8, on the other side.
(Or row)

A) Pins 1 and 3 are for the HarDDrive activity LED light.
(HDD LED light)
Pin 1 is for the Positive ( + ) wire.

If the Harddrive activity LED light is dim when operating, switch the wires around.

B) Pins 5 and 7 are for a Reset switch, IF a Reset switch is used.

C) Pin 9 is Not Connected. N/C. Reserved for the factory

D) Pins 2 and 4 are for the Power On LED light
Pin 2 is for the Positive ( + ) wire.

If the Power On LED light is dim when the computer is on, switch the wires around.

E) Pins 6 and 8 are for the Power On switch. (Located inside the plastic Power On button assembly. It is an ATX power on switch)

http://www.fixya.com/support/t614458-hp_mcp61pm_hm_motherboard_diagram

As for the orange SATA headers on the motherboard. The SATA harddrive should plug into the lowest number of SATA header.
It may be labled SATA 0, or SATA 1.

The beauty of SATA however, is that you can plug the harddrive into anyone of those SATA headers. BIOS will find the device. (Harddrive)

If you need guidance in connecting any other cables, such as power cables, or optical drives, etc, post back in a Comment.

Regards,
joecoolvette

Jan 09, 2012 | Gateway Computers & Internet

1 Answer

Mpc61pm-hm rev 2.2 manual


There is a brief manual at HP website: HP Support Document
If you need PINs specification try here: FixYa - HP MCP61PM-HM motherboard diagram
Else you'll have to try contact ECS (board manufacturer) and ask them for the manual: ECS Web Site

Jan 02, 2012 | HP Computers & Internet

1 Answer

Trying to find interal connectors 2-1 pin audio spdif on a emachine 1831-05. motherboard is mcp73vt-pm


It has been stated from my sources, that the ECS GF7050VT-M5 mobo, is the same as the ECS MCP73VT-PM, with a slight difference.

The difference being that the MCP73VT-PM mobo is based on the Micro-ATX form factor, and the GF7050VT-M5 is based on the ATX form factor.

[ Micro-ATX form factor size is 9.6 inches by 9.6 inches. 9.6 inches is approximately 9 and 9/16ths inches. It's also 244mm by 244mm.
ATX form factor is 12 inches by 9.6 inches. 305mm by 244mm ]

ECS MCP73VT-PM,

http://www.e4allupgraders.info/dir1/motherboards/socket775/ecsMCP73VT-PM.shtml

ECS GF7050VT-M5,

http://www.ecs.com.tw/ECSWebSite/Products/ProductsDetail.aspx?detailid=858&CategoryID=1&DetailName=Manual&MenuID=1&LanID=0

To the right of the subheading - Download, left-click on the server location nearest you.
[Taiwan, USA, Europe, China ]

This is a PDF file download. (Motherboard Manual) May take a few seconds before you see the first page, and additional time for the file to fully download.
Suggest you let the file download all the way, before looking through it.

I'm also looking at an ECS MCP73VT-PM on Ebay, as well as the PDF motherboard manual for the ECS GF7050VT-M5.

Motherboard oriented so that the Processor is to the top, ram memory slots to the right, and the orange PCI Express x16 slot to the bottom, the SP/DIF header on the GF7050VT-M5 is located to the left of the PCI Express slot.

From the poor view on the Ebay link, the MCP73VT-PM also seems to have the SP/DIF header in the same location, but clocked differently.

The header is clocked perpendicular to the orange PCI Express x16 slot, while on the GF7050VT-M5 the SP/DIF header is parallel to the PCI Express x16 slot.

The header is 4 pins long, with 1 pin not installed.
Pin 1 is marked on the motherboard.

Pin 1 is SP/DIF Digital Output
Pin 2 is +5VA ( 5 Volt analog power)
Pin 4 is Ground

There is no Pin 3.


Apr 06, 2010 | Computers & Internet

1 Answer

945GCT - HM motherboard, SPDIF out?


Hi, Before doing anything please refer the motherboard manual, and as per my knowledge you need not solder any pin on the board, if you do so may be something else might not work. I better suggest you to check the Manual before doing anything.
Regards

Feb 22, 2010 | EliteGroup ECS 945GCT-M/1333 Motherboard -...

2 Answers

MCP61PM-HM spdif pin assignment? trying to


| | |
| | |
***************
+5v Out Ground

The one all by its self is the 5 volt
the one in the middle is SPDIF Out
the one next to this is ground

Nov 28, 2009 | HP VECTRA VLI8 P3 Motherboard (KZM6120)

1 Answer

Need SPDIF pinouts identified.


When looking at the board, bottom towards you assuming that the 3 pins are parallel to the pci/e slots, the left pin should be the +5V vcc the middle pin is the spdif out and the right pin is the ground. Also the 3 pins are probably not exactly the same distance from each other (equally spaced) the 2 pins that are closest together are the spdif and the ground, spdif is always the middle pin. This info is based on 2 different asus motherboard install guides. I hope this helps you.

Aug 11, 2009 | ASUS Intel 5000P Chipset...

1 Answer

Spdif pins


First of all when you got these pictures were they from *********** board?If they were did you wear a wrist bracelet to prevent Electro Static Discharge (ESD)? If not you may have just ruined your computer. But there is a chance you didn't. Next I am not positive but you might need to get a three pin SPDIF connector from Radio Shack. But I would try the one you have. See if it works. But I must warn you going inside your computer if you are not a technician can be very harmful to your computer. So if you take my advice Touch some part of metal on the outside edge so you are grounded to your computer.

P.S. Damage from ESD may not be right away. It can be months from when the computer was shocked. If my advice doesn't work tell me and i will give you much more help.

Hope this Helps.
RCF

Apr 26, 2008 | Creative Labs Sound Blaster Live! 5.1...

Not finding what you are looking for?
Computers & Internet Logo

2,441 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18381 Answers

Tony

Level 3 Expert

2598 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...