SOURCE: good evening, hope all is
if the motor is still turning and the belt is not moving then you have two things it could be.
1. the walking belt needs to be tightened by adjusting the bolts at the rear of the machine for the rear roller (equal turns for both)
2. the drive belt is no longer tight or has come off and may need readjusted
did you open the front end to look inside yet? i am willing to bet that if you check these both out you should get it solved since the motor still runs
SOURCE: golds gym 450 incline motor is going haywire and treadmill wont run because of incline
Watch the videos:
http://www.youtube.com/watch?v=TquYcOzGIw4&feature=related
http://www.youtube.com/watch?v=9G4MZh8JO2Q
http://www.youtube.com/watch?v=M7qJrRbdfBc
http://www.youtube.com/watch?v=MIIxoPtvhy8hthttp://www.fixya.com/support/r10724803-measure_voltage_in_transforme_fitnesshttp://www.youtube.com/watch?v=bF3OyQ3HwfU&feature=relatedSee the block diagram, and how you will see the main motor controller board has aprox90% of functions of any treadmill. Good luck, sincerely. G-d bless you.
ERNESTO CUADRA
MANAGUA, NICARAGUA. C.A
388 views
Usually answered in minutes!
×