Question about NetGear WGR614 Wireless Router

2 Answers

How do i change my netgear password - NetGear WGR614 Wireless Router

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 4 Answers

My question was "How do I change the USERNAME". I know how to change the password.

Posted on May 30, 2014

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 94 Answers

The default username and password for netgear router is admin and password

if in case you have change the username or password and you dont remember what it is just press the reset button at the back of the router for 5 sec, careful though cause this will also delete all the info that you have input in the router the first time such as isp info this will cause disconnection from the internet, but as soon as you know those info you can go ahaead and do this. this will also reset the username and pass of the wifi connection.

Posted on Feb 24, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I need to change the password for my router


http://kb.netgear.com/app/answers/detail/a_id/23439/~/finding-the-wireless-network-password-on-a-netgear-router-using-genie

Jan 07, 2015 | NetGear Computers & Internet

1 Answer

What is my default ownership password netgear N600 only numbers


See the following articles for more information:


Log in to your NETGEAR router by browsing to http://www.routerlogin.net or http://www.routerlogin.com. Enter the username (admin)and password by default the password is 1234 unless it has already been changed
hope it helps

May 25, 2012 | NetGear N600 Wireless Dual Band Router

1 Answer

How do i change password


to change the password on a netgear, you first need to secure or make sure that you are connected to it. be it wireless or hardwired. after ensuring that your laptop is connected, open a browser, and type 192.168.1.1 or www.routerlogin.net, then it would ask you for a username and password. username is " admin " password is " password " then it would take you now to the netgear page. on the left side of that screen, click on wireless settings, then you can start changing your password in security option. then click apply.

Sep 09, 2011 | NetGear DGN1000 Wireless Router

2 Answers

Reset password


The default password for the router's Web Configuration Manager is password. NETGEAR recommends that you change this password to a more secure password.
To change the administrator password: 1. On the main menu, under Maintenance, select Set Password to display the Set Password screen. 2. To change the password, first enter the old password, then enter the new password twice. 3. Click Apply.
Best of luck!

Sep 06, 2011 | NetGear WNR2000 Wireless Router

1 Answer

How to change password


to change the password on a netgear, you first need to secure or make sure that you are connected to it. be it wireless or hardwired. after ensuring that your laptop is connected, open a browser, and type 192.168.1.1 or www.routerlogin.net, then it would ask you for a username and password. username is " admin " password is " password " then it would take you now to the netgear page. on the left side of that screen, click on wireless settings, then you can start changing your password in security option. then click apply.

Feb 09, 2011 | NetGear WGR614 Wireless Router

2 Answers

Default factory password


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

This applies to:
  • Most of the NETGEAR devices such as routers and smart switches.

Aug 13, 2010 | Cell Phones

1 Answer

I am trying to connect another computer to my wireless network but i do not know my netgear code, where do i find this?


Netgear code? Can you be more specific?

Are you referring to the password required to connect to your wireless network called "Netgear"? I assume you're being asked for a password on the 2nd computer when trying to connect to the wireless network called "Netgear".

  1. In a web browser, enter the router's IP address - either http://192.168.0.1 or http://192.168.1.1 by default.
  2. When prompted for a Username and Password, enter the default username and password (admin; password) unless you have already changed it. NETGEAR recommends changing the default password to increase the security of your network.
  3. Select Wireless Settings from the Setup menu in the left-hand navigation bar.
  4. Under Wireless Network, enter your desired network name in the Name (SSID) box. This is currently set to "Netgear" most likely.
  5. Under Security Options, select WPA-PSK [TKIP] + WPA2-PSK [AES].
  6. Under Security Options (WPA-PSK + WPA2-PSK), enter your desired network password into the Passphrase box.
    • WRITE DOWN or KEEP NOTE of your network name, security option and passphrase - you will require them to connect wireless computers and devices to your network.
  7. Click Apply to save the settings.
Once you've set this password, you can use it to connect to "Netgear" on your second computer.

Jul 25, 2010 | NetGear WGR614 Wireless Router

2 Answers

I am trying to configure a netgear wgt624 v3 router. I can't get passed the admin and password. Please help me configure this


Most of the NETGEAR devices, except ReadyNAS products and Fully Managed switches, have the following default username and password:
  • Username = admin
  • Password = password
    • For older devices, password = 1234
If you have changed the default password and have forgotten it, you will need to reset the NETGEAR device to factory default settings in order to use the default username and password. Click here to learn how to reset the NETGEAR device to factory default settings. Please note: restoring a device to its factory default settings will erase any changes you have saved to the device.

Feb 12, 2010 | Computers & Internet

Not finding what you are looking for?
NetGear WGR614 Wireless Router Logo

63 people viewed this question

Ask a Question

Usually answered in minutes!

Top NetGear Computers & Internet Experts

Prashant M
Prashant M

Level 3 Expert

2260 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18389 Answers

Are you a NetGear Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...