Question about Interlink Electronics VersaPoint Keyboard

1 Answer

Vp6210 wireless connection

I need to reset my keyboard as it does not seem to be communicating with wireless. 1234 setup matches between keyboard and remote but see no reset button. help

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 10 achievements.


    An expert that got 5 achievements.


    An expert whose answer got voted for 500 times.

  • Expert
  • 8,637 Answers
Re: vp6210 wireless connection

Normal 0 Press the Receiver button (and the lights will start flashing.
Then if the Keyboard isn't working, press the small RESET/CONNECT button on the back of the board to connect the keyboard to the receiver.

Posted on Jan 20, 2009

Add Your Answer

0 characters

Uploading: 0%


Complete. Click "Add" to insert your video. Add


3 Points

Related Questions:

1 Answer

No communication with keyboard

Hi there,

Well it seems that you are using a wireless keyboard, if it is a wireless keyboard then you need to do a re-search to get it work again. There is a wireless device connected to your computer USB port that use to make a communication between computer and keyboard. and there is a button on that device all you need to do is press that button and press another button located on the keyboard backside. sure it will helps you.

Good Luck

Oct 06, 2011 | Keyboards & Mice

1 Answer

I am receiving a error message on boot, When it loads up to the persons selection screen nothing works. I purchased a new wireless keyboard and it still is not working. I also cleaned the inside of the...

Have you activated the wireless connection between the keyboard and the reciever. if this is not done then it wont work. There should be a button on the keyboard that you must hold down so that the signal can be recognized at the reciever end. Try it and see....if this is no good then you need another wireless keyboard setup!!!

Jan 01, 2010 | Unotron S5100KG Keyboard

1 Answer

Wireless keyboard and mouse not working

It seem that the keybd and mouse are not installed. Install the SW on the CD and then start using them. No internet connection is required.

Aug 23, 2009 | Logitech M-SBF96 Mouse

1 Answer

Logitech MX3200 Wireless keyboard works but mouse does not

i have the same wireless keyboard. i suggest that u redothe setup process and setup the mouse first. if the problem persist then move the wireless scanner.

Apr 10, 2009 | Logitech Cordless Desktop MX3200 Keyboard...

1 Answer

Microsoft Keyboard (1045) doesn't work with new Samsung Monitor


Keyboard and mouse have no connection with Monitor
Since keyboard and all are linked with mother board

so firstly i suggest you yo check the wireless connections are ok

Now reinstall the software packages that came with the keyboard(And drivers)

i hope this will help you

Mar 23, 2009 | Microsoft Wireless Notebook Optical Mouse...

2 Answers


had the same problem and tried pressing down the connection button on the keyboard at the same time as the connect button on the receiver. If you press down on both intermittently then they should pick up each other.
It seems there isnt a reset button like there is on the mouse, which is what i was looking for on the keyboard - i presume they mean the connection button / LED light but you have to press the receiver button at the same time.
good luck!

Mar 02, 2009 | Belkin Wireless Keyboard/Optical Mouse...

1 Answer

Logitech Mouse Not Working

Normal 0 Are your batteries in the Keyboard and mouse good?

You probably have gotten it working by now but here is a way to get it work if not.

Press the Receiver button a(and the lights will start flashing, then if its the Keyboard that isn't working, press the small RESET/CONNECT button on the back of the board to connect.

If its the MOUSE do the same except push the small RESET?CONNECT button on the back of the mouse to connect. Then they should work properly. Hope this helps. Bud

Dec 23, 2008 | Logitech S 510 (967555) (DH967555)...

2 Answers

Microsoft wireless laser keyboard 6000 v2.0 has locked up. how to unlock?

for the laser 6000 v2

hit the reset button on the wireless receiver (oval button)
hit the small white reset button on back of wireless keyboard (it's called Connect Channel)


Oct 08, 2008 | Microsoft Wireless Laser Mouse 6000 v2.0

2 Answers

Cannot connect wireless keyboard and mouse

I am assuming that this is an INFRA-RED device, with
plug and play capability.

1) Make sure that the infra-red port is turned ON on your PC,
in the BIOS and in Windows (using control panel)

2) Make sure that the infrared driver is working:

My Computer ==> Right Click ==> Properties ==>
Hardware ==> Device manager ==> ....

Find the Infra-red device and check its status.

Some laptops have a mechanical switch witch controls all
wireless ports. If you shut-off the Wi-Fi, the blue-tooth and
the infra-red will also be disabled.

3) Check for tiny reset buttons on the keyboard, mouse and
the receiver. Press them repeatedly.

4) If the device is communicating, and infra-red ICON
should appear on you taskbar (RHS).

Right click the icon and make sure you enable IR
communications AND plug and play.

5) Make sure you have installed any drivers that came with
the keyboard, if any.

6) Again, make sure that infra-red communications are enabled
in the control panel.

5) Failing that, it is possible that the keyboard is defective,
or the infra-red port on your laptop is NFG, it would not
be the first time.

6) You may want to take your keyboard to a computer
shop, and ask the staff the try it with a different PC.

Alternately, try a different keyboard with the laptop.


May 07, 2008 | Keyboards & Mice

1 Answer

Innovera Wireless Optical Mouse and Keyboard

I would replace the whole setup with a new mouse and keyboard. A lot of manufacturers out there have faulty products and wireless input devices are not known for their reliability. I would suggest a logitech setup. This seems to be the most stable brand that I have found.

Aug 16, 2007 | Innovera Wireless Keyboard/Optical Mouse...

Not finding what you are looking for?
Interlink Electronics VersaPoint Keyboard Logo

Related Topics:

507 people viewed this question

Ask a Question

Usually answered in minutes!

Top Interlink Keyboards & Mice Experts


Level 3 Expert

18259 Answers

micky dee

Level 3 Expert

2602 Answers

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Are you an Interlink Keyboard and Mice Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides