Question about Maytag Dryers

Open Question

Free service manual maytag mcg8000aww

Need service manual to troubleshoot dryer center

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 767 Answers

SOURCE: Maytag MCG8000AWW gas dryer no heat

The ignitor may be bad you can chek to see if there is 110volts when the dryer is allin by unplugging the wire to the ignitor and putting using a multimeter to chek for voltage at the wires. If there is power to the ignitor and the ignitor is not glowing up then the ignitor is probably bad replace the ignitor.

Posted on Jan 12, 2010

Testimonial: "Thanks so much, this information really helped us so much. This is the best site ever!"

Ad
  • 5 Answers

SOURCE: im trying to gain access

This not a solution, just a statement that the only way in seems to be via the front with removing everything! There is a link in here to a Service manual that shows (poorly) different stages of a tear down. http://www.applianceaid.com/pdf/16022785.pdf I think my washer not spinning out the clothes properyly has cause what every it is to break. Lots of good info on how to test the ignitor, but how to get it out is another matter. Did you have to call a tech?

Posted on Jun 29, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to take a maytag dryer apart model mcg8000aww


Go to www.repairclinic.com and enter mcg8000aww. You will be presented with a list of common replacement parts and may be able to view a generic Maytag disassembly video.

Nov 03, 2016 | Maytag Dryers

1 Answer

No power to maytag neptune drying center mcg8000aww


Sounds like the thermal fuse is open, which generally means the vent is clogged

Aug 31, 2014 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Maytag neptune drying center has no power mcg8000aww


Could be a bad thermal fuse, a bad drum belt, a door switch a loose wire , one of the computer boards or the user interphase. Time to call a qualified technician. This machine is a complex machine to disassemble and diagnose and if reassembled wrong could prove to be dangerous to operate.

Aug 31, 2014 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Drum of Maytag dryer Model # MCG8000AWW is becoming black and dirty


I would start by taking the dryer back off and cleaning all the lint out. on mine there was lint by the burner and burning and blowing into dryer

Apr 06, 2014 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Where is the ignitor located in the maytag mcg8000aww


inside the burner funnel tube at the bottom of the dryer below the drum,you need to remove the front panel to access the ignitor

Aug 26, 2012 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Im trying to gain access to the drying center by maytag, mdl mcg8000aww. i am having trouble getting in to check the components


This not a solution, just a statement that the only way in seems to be via the front with removing everything! There is a link in here to a Service manual that shows (poorly) different stages of a tear down. http://www.applianceaid.com/pdf/16022785.pdf I think my washer not spinning out the clothes properyly has cause what every it is to break. Lots of good info on how to test the ignitor, but how to get it out is another matter. Did you have to call a tech?

Apr 01, 2011 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

I have the Maytag MCG8000AWW gas "drying center", it tumbles but does not have any heat. The burner lights when the cycle is started, and for a few minutes it does heat. Then the humidity indicator changes...


Hi,
If you have a gas dryer2_bing.gif.
The most common problem with a gas and no heat is the ignitor going bad...

Here is a tip that I wrote about that problem...
Gas Dryer not Working Gas Dryer Not Heating
http://www.fixya.com/support/r4398592-gas_dryer_not_working_gas_dryer_not

If your dryer is electric2_bing.gif..
There could be a number of different problems...
Check out this tip that I wrote about this problem...

Dryer Troubleshooting2_bing.gif Electric Dryer won t Heat
http://www.fixya.com/support/r3866345-dryer_troubleshooting_electric_dryer_won

heatman101

May 06, 2010 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

Maytag MCG8000AWW gas dryer no heat


The ignitor may be bad you can chek to see if there is 110volts when the dryer is allin by unplugging the wire to the ignitor and putting using a multimeter to chek for voltage at the wires. If there is power to the ignitor and the ignitor is not glowing up then the ignitor is probably bad replace the ignitor.

Jan 12, 2010 | Maytag Neptune MCG8000AW Gas Dryer

1 Answer

MCG8000AWW Neptune Drying Center initially has heat, then not


hey u burned the ingniter with all that lint, so just buy it around $100 , replace it and back in business.

Feb 28, 2009 | Maytag MDG21PD Electric Commercial Dryer

Not finding what you are looking for?
Dryers Logo

Related Topics:

838 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maytag Dryers Experts

Dan Webster
Dan Webster

Level 3 Expert

8220 Answers

Tim Whalen

Level 3 Expert

3074 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Are you a Maytag Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...