Dynex D052 Remote Control battery

But........

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Dynex TV Remote Control Codes

Dynex Products https://www.dynexproducts.com > remote-control-code
Dynex TV Remote Control Codes ; Charter DIGITAL: 0463 ; Comcast M1057: 0463, 10463, 096 ; Cox COX: 0463 ; Direct TV RC23: 10463 ; Dish Network VIP508: 720 ...

Programming Dynex TV Remote Codes [2023]

The Product Analyst https://theproductanalyst.com > Remote Codes
Oct 6, 2022 - 5-Digit Remote Codes for Dynex TV · 10463 · 11463 · 11780 · 11785 · 10180 · 10178 · 10171 · 10623 ...

Remote Control Codes For Dynex TVs

directutor.com https://www.directutor.com > content > remote-control...
The button will blink twice to confirm the code is stored. Dynex tv codes for universal remotes using 5 digit remote codes. 10463 11463, 11780, 11785. Dynex tv ...

Remote Control Codes For Dynex TVs

codesforuniversalremotes.com https://codesforuniversalremotes.com > remote-control...
Dec 19, 2015 - Remote Control Codes For Dynex TVs · 5 digit remote codes for Dynex TV 10463 11463 11780 11785 · 4 digit remote codes for Dynex TV 0490 0463 0783
..

No one buys Universal Remotes these days. Buy a copy remote made for the television

https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote

Remote Control Codes For Dynex TVs

https://codesforuniversalremotes.com > remote-control-...
Remote Control Codes For Dynex TVs · 5 digit remote codes for Dynex TV 10463 11463 11780 11785 · 4 digit remote codes for Dynex TV 0490 0463 0783 1944 1250 0464.

Remote Control Codes For Dynex TVs

https://www.directutor.com > content > remote-control-...
Program Dynex TV using Universal remote control codes along with steps to program Dynex ... Dynex tv codes for universal remotes using 5 digit remote codes.

Dynex Tv Universal Remote Codes

https://myuniversalremotecodes.com > dynex-tv-univer...
Nov 1, 2019 - 5 Digits Dynex Universal Remote Codes ... 10171, 10463, 10180, 10096, 10236, 10154, 11963, 10178, 10623, 10096,11864, 12270, 11665, 10030, 10028, ...

Check the remote control for its infrared emission. Check it with fresh batteries. Check it by pressing all the keys. You can detect the presence of infra-red emission from the remote control, using a cell-phone camera. If you wish to get more details about how to check a remote control, please visit this site. One among the posts has details about it. Surf the site with patience. In some cases, the remote control might need to clean.

http://electro-medical.blogspot.com/

Check the remote control for its infra-red emission. Check it with fresh batteries. Check by pressing all the buttons on it; and see whether all of it generates infrared signal while pressing. If it is found OK, check and replace the infrared sensor inside the TV. If you wish to get some details; check the site linked here. It has details about how to check a remote control; by one among the post. Surf the site with patience. Pull up older posts. http://electronicshelponline.blogspot.com/ If the remote control is found OK; check and replace the infra-red sensor inside the TV. Contact any service technician

Most remotes use two AA or two AAA batteries.

I just called Dynex because I had the same problem. Remove the batteries and press the power button and hold it down for 15-20 seconds, put the batteries back in and try to power on and power off, change channels, etc... if so the remote is fine. The guy told me that sometimes when you need to replace the batteries you also have to re-set the remote control.

Try the following first;

Step 1- Pull the batteries out of the remote and leave them out until Step 4.
Step 2- Press and release each and every button one at a time on the remote control until every button has been pressed and released at least once!
Step 3- If your remote has slide switches, you must move the switch to each position then repeat the button pushing in Step 2.
(When you're done, be sure to put the slide switch in the correct position to operate the unit the remote came with!)
Step 4- Put the batteries back into the remote, being very careful to install them correctly.
New batteries should be used if you're not sure about the old ones.

If you are still having problems, you should return the unit to the place of purchase for a replacement.