Question about Hotpoint Ultima WD72 Front Load Washer/Dryer

2 Answers

Washing machine will not start

Everything was fine but now when I press start nothing happens

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 566 Answers

Hi if you are sure the plug/fuse is ok and the actual wall socket is ok ie try other appliance to verify? then your problem may be the door closed micro switch this is the one that prevents opening after wash for a short time/ untill light goes off ? some times this also goes faulty by not allowing washer to start when door closed normally try closing door then give a further gentle push if it starts? then it will be the switch mentioned above common prob on front loaders keep update on progress hope this helps? ps if it is the switch call back and may be able to advise on remedy or renewal?

Posted on Nov 01, 2008

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn it on

Posted on Nov 01, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I reset my washing machine?


Sounds like a control problem. Try googling your make and model of appliance followed by "service manual". Most newer, digital controlled appliances have a "secret" service menu where you can check for error codes, stuck buttons, bad sensors and such. Download the tech manual and start troubleshooting. Or you can call an appliance repair tech to come out and do the same thing for a fee.

Jan 02, 2015 | Washing Machines

1 Answer

Bosch exxcel washing machine


try checking/replacing the inlet water valve. hope this helps

Nov 24, 2013 | Washing Machines

1 Answer

Water reuse error


I also face the water reuse error problem on the top loading Whirlpool washing machine. Powering on is OK. selecting the program also goes fine. The moment start/pause button is pressed, little water flows to draw detergent and immediately the "water reuse" LED lights on. Further to that nothing happens. Any solution?

Oct 16, 2013 | Whirlpool Washing Machines

1 Answer

The washing machine will run a complete cycle perfectly, when i then empty it and refill with dirty washing, i put it onto the programme and press start, the machine sounds like the motor is running to...


On some machines when you start a programe the pump may run for a short while Restart machine and just give it a try for 3/4 minutes first just incase.

Sep 15, 2010 | Washing Machines

1 Answer

It just stopped!


there is a possiblity that your lid switch might have gone bad.
try and check all the wiring connections and make sure everything is in good order.

Feb 06, 2010 | Washing Machines

1 Answer

Machine will not start


Make sure lid is completely closed with no obstructions.

Oct 10, 2009 | Kenmore Washing Machines

2 Answers

Power light is on but nothing happens - indesit iwme12


If the door does not lock at this point it probably needs door lock replacing

Sep 05, 2009 | Washing Machines

1 Answer

Duet Sport. Will not start in any setting.


Get a sledge-hammer to within 2 metres of the washing machine. Then go for the button on the right side "end of cycle" & depress it with your finger for 3 seconds, the control light will come off & I hope you will be able to use your machine.

PS. Remove the sledge-hammer.

Mar 12, 2009 | Whirlpool Duet GHW9150P Front Load Washer

Not finding what you are looking for?
Hotpoint Ultima WD72 Front Load Washer/Dryer Logo

74 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hotpoint Washing Machines Experts

hungoverrr

Level 1 Expert

5 Answers

puggy666

Level 1 Expert

47 Answers

gbob59

Level 3 Expert

2963 Answers

Are you a Hotpoint Washing Machine Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...