Question about LG DU-37LZ30 37 in. LCD HDTV
I am not sure of the model number, but it is a LG 37 inch HDTV-LCD. The tv has a few black streaks, going in several directions, behind the glass. Other than that the picture quality is fine.from what I can see. The tv is always turned off, anytime that I cleaned the screen, so there were never any moisture problems. It is very distracting to watch any tv, because of the streaks. The streaks appear on any channel and from outside sources, so I know that is not caused by the cable provider, Any help in resolving the problem would be greatly appreciated.
My email address is email@example.com
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
Before going further; try a hard reset first. If it does not help you, replace the main digital board. There are two methods to reset TVs. The first is simple to do; a Hard Reset. The other is somewhat skilled; is a Factory Reset (System Reset). To make it a hard reset, just unplug the TV from AC mains wall socket, and re-plug it back after 15 minutes or so. If you do this by overnight is better. This procedure will make it a hard reset. If you want to make it a system reset [Factory Reset]; you have to enter its service mode option, and select the factory reset option. If you wish to get some details; visit the site linked here.
Posted on Apr 08, 2017
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
try connecting tv to cable direct also try unplugging both converter and tv for wile like 5 mins plug both back in see if tv and converter sync
Posted on Mar 09, 2008
Hi , I recently had the same problem which I was determined to fix . So I did a few weeks of research to find that it was the Y SUS board which burns out. I'm sure you realized that the TV gets hot. Personally I think this is why. circuit boards don't like heat and I've learned that the cooling fans are a joke. I replaced the board and got my picture back. I proved the fan theory because after the screen started to act up. I placed a cooling fan near the vent holes on top and the problem cleared right up,It also helps if you lower the brightness which helps out on the heat situation.I will soon be adding a fan with a temp. sensor. This shoud help if your screen has lines when you initially turn the cool TV on.then I have Some other costless solutions. Hope this helped these are great TV's and like our cars we maintain them not throw them away..................................Mr Wiseman
Posted on Jan 30, 2009
SOURCE: frozen picture on LG LCD 37"
Try One of your working TVS and connect it to your cable outlet of the TV that is having problems. If that TV Does not work then there may be a degraded fitting or the Leg coming of the splitter to that outlet could have a Low Signal Problem
Next Take the First TV that was not working properly and put it on the cable outlet of one of the TVs that is working properly and if the TV set works on that Channel then you know it is not your TV that it must be the cable
Posted on Feb 28, 2009
Tips for a great answer:
Jan 11, 2016 | LG 42LS5700 42 Inch 1080p 120Hz Smart TV...
Dec 08, 2014 | LG 55-Inch LED LCD TV - 55LM4700 Cinema 3D...
Jun 30, 2011 | LG 37LC7D 37 in. LCD HDTV
Jan 31, 2011 | LG 37LC7D 37 in. LCD HDTV
Jul 10, 2010 | LG 37LC7D 37 in. LCD HDTV
Mar 04, 2009 | LG 37LC7D 37 in. LCD HDTV
Nov 13, 2013 | LG DU-37LZ30 37 in. LCD HDTV
391 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: