Question about Kenmore Sewing Machines
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
You put the hook (the half moon thing with a sharp point on it) in the machine by placing it opposite the little curved bar. Make sure it is seated properly on the ridge. The you take the race, the circular part with a small plate on the top and place that over the hook(the plate side will be facing up). It will only fit a certain way, it could have a slot that a notch fits into (that is usually how it goes). Then slide the arms over it and they will snap into place. Once done, turn the handwheel and make sure everything moves smoothly. If not, you'll need to start over as something isn't seated correctly. Then you can install the bobbin case as usual.
Posted on Mar 01, 2009
SOURCE: Where to oil a Kenmore 158-17600
Remove the top and bottom covers. Turn the wheel and put a drop of oil anyplace that moves and rubs.Also at the ends of each shaft. Open the side cover and oil the needle bar and all the parts inside that move and rub.Put a drop of oil on the hook.Do not put a good piece of fabric in the machine right after you've oiled it. Sew it off on some scraps that you can throw away.
Posted on Apr 18, 2009
Tips for a great answer:
Feb 02, 2016 | Kenmore Sewing Machines
Jan 27, 2016 | Sewing Machines
Jan 20, 2016 | Kenmore Sewing Machines
Jan 07, 2016 | Kenmore Sewing Machines
Oct 15, 2015 | Kenmore Sewing Machines
Sep 04, 2015 | Kenmore Sewing Machines
Feb 23, 2015 | Kenmore Sewing Machines
Sep 10, 2010 | Kenmore Sewing Machines
Jun 20, 2009 | Kenmore Sewing Machines
47 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: