Question about Proview PT 15.1" LCD Monitor

1 Answer

Monitor 700 P proview TFT problem

My TFT 700P display comes and goes when we switch on the computer . Then after repeated on and off finally it comes ON and remains working.
I have checked voltage at 7812 and it is 11.7volt on one side and 14 volt on HT side. when there is no display this voltage is 16v.

Can you suggest some remedy.

sunil
narwal_sunil@yahoo.co.in

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Novelist:

    An expert who has written 50 answers of more than 400 characters.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

  • Expert
  • 159 Answers

Try changing out all of the capacitors on the power/inverter board first.
You probably do not have to change the large main one, Just the other ones.
It sounds like you have voltage but your amperage is not there. the 11.7 should probably be closer to 12.
Ebays
bammbammfran

Posted on Nov 06, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How can i download driver for proview 700P?


you can download it from a website called driver guide. I have downloaded it and confirmed no viruses and to be the proper driver. Click here for the proview 700p driver
if you need further assistance please let me know, Thanks-Midwest-tek

Aug 28, 2010 | Proview PL913B 19" Flat Panel LCD Monitor

2 Answers

My proview 700p has lines and picture jumps can anybody help me please


Look at the power supply first, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.

Nov 24, 2009 | Proview PL913B 19" Flat Panel LCD Monitor

1 Answer

My monitor does not work right. it says vga not support.. its a proview 17" flatscreen..active matrix tft lcd


I suspect your Computers Display settings need adjustments and or a Driver from Proview installed...therefor if you can get on the net, I would look at FAQ's on Proviews Website, i.e:

http://www.proview.net/Support/FAQ_Question.aspx?pi=2026

hope that helps,

Bastian






Jun 02, 2009 | Proview PL713S 17" Flat Panel LCD Monitor

1 Answer

Preview 700 P


you should change al lthe caps in the PSU.. you can get them all from Maplins for a few pounds.
best get 105 centigrade ones

Oct 25, 2008 | Proview XL370B (Black) 17 in. Flat Panel...

2 Answers

Green led light flashing on 700p proview flat panel and no picture


I have a similar problem.
Switching the screen off (front panel button) and on again after waiting a few seconds fixes it.
This is a recent problem, so I'm expecting it to get worse and worse until one day!!!!!!

Oct 03, 2008 | Hanns.G Corporation JW-199DPB 19" LCD...

2 Answers

Dead Proview 700p monitor


my monitor samston 17`` have a problem with screen ten minute after on it`s become on / off screen ( it`s black, it`s white ) when it`s happen the wording can read, when it`s on.

Jun 25, 2008 | Computers & Internet

7 Answers

Need help: ProView 700P Silver LCD Monitor


You do NOT need a driver. Your monitor is broken. The high voltage power supply that provides power to light the CCFL cold cathode fluorescent lights is broken. The most common problem is that the 470uF 25V capacitors on the power supply circuit board are bad. Bad Caps have a swollen and sometimes leaky top. There are 6 capacitors that cost about 50 cents apiece from www.partsexpress.com . Buy high temperature replacement capacitors rated at 105C. If you can't de-solder and resolder have some 14 year old kid do it for you.

Feb 26, 2008 | Computers & Internet

3 Answers

Proview 700p problem


DISPLAY IS GOING OUT SIMPLY GET NEW MONITOR

Jan 16, 2008 | Proview PL 566s 15" Flat Panel LCD Monitor

Not finding what you are looking for?
Proview PT 15.1" LCD Monitor Logo

Related Topics:

220 people viewed this question

Ask a Question

Usually answered in minutes!

Top Proview Computers & Internet Experts

Diego Zenizo
Diego Zenizo

Level 1 Expert

22 Answers

Brad Brown

Level 3 Expert

13822 Answers

Terry Allen
Terry Allen

Level 3 Expert

680 Answers

Are you a Proview Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...