Question about Craftsman 1/2" Impact Wrench

Open Question

How to oil a craftsman model 875.191183 air impact wrench

Its got a little ball on the side that says "oil " it looks like you have to have a special tool to depress the ball and shoot the oil in it

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
john631068
  • 172 Answers

SOURCE: Craftsman 1/2 inch impact wrench,not working

Make sure you have at least 90 pounds of air and if you do you need to oil the wrench air tool oil pour some in the where the air line hooks up ..air tools need to be oiled daily cause compressed air cause water vapors to build up when you use it and then when it sits it begins to rust a bit and the oil stops this ...

Posted on Nov 17, 2009

Ad
mister_b_65
  • 74 Answers

SOURCE: where do i get a replacement trigger, mine is

If your local Sears store can't help you, try looking to see if you have a Snap-On, Corn-well, or Matco tool distributor in your area. Many air tools are manufactured by companies who make tools for different distributors. I work in a shop, and have found that many of the tool trucks have parts that'll work on other brands of tools besides their own.

Posted on Dec 13, 2009

  • 332 Answers

SOURCE: i have a craftsman 1/2 inch impact wrench, i'm

Try turning your line air pressure up to at least 90 pounds
Most lug nuts are tightened to 85 pounds or higher

Posted on Mar 30, 2010

  • 2 Answers

SOURCE: Dont know where to put oil in Craftsman 1/2 " Impact wrench

I just bought one of these also. Manual says oil goes into "the air inlet" which I'm thinking is where you attach the hose. That way the oil is sprayed throughout the interior of the gun once you run air through it.
Question for you: I can't get an impact socket onto this gun, almost seems like the square hole is too small. (yes, both are 1/2" drive). How do you get a socket on this stupid thing?
(man that sounds like I'm an idiot, but I've spent a half hour leaning all my body wight, wiggling, etc. and can't get a damn socket on)

Posted on Jun 20, 2010

Dirt Dobber
  • 253 Answers

SOURCE: Why doesn't my craftsman air sockets not fit

Make sure the expansion ring is on the end of the impact gun. this holds the sockets in place.

Posted on Aug 10, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do you oil a Craftsman Air Impact Wrench Model No. 87518846


If you are just oiling the gun,hold it upside down and squirt some oil ine the air chuck fitting.(I just use an empty bottle of my wife's hair dye filled with ATF-it's cheaper than a can of "air tool oil".If you are referring to the grease fitting for the impact mechanism,look for a small hole with a captured metal ball.The only tool I found to fill this is a specially designed miniature grease gun(got mine at Sears).

Jun 13, 2012 | Craftsman 3/8 in. Pistol Grip Impact...

1 Answer

How do you oil a Craftsman Air Impact Wrench Model No. 875191182?


Just put 3-5 drops of air tool oil down the air inlet coupler and then run the gun for 5 seconds. Do this everyday that you run the gun for best results.

Feb 25, 2011 | Craftsman 1/2" Impact Wrench

1 Answer

Impact wrench is not working at all.the air is coming out of the hole at the bottom of wrench next to where the air hose is hooked up.


fill down the air pipe wit penatrating oil hold trigger and keep movin forward and reverse wen in frees up fill wit airtool oil

Aug 10, 2010 | Craftsman 1/2" Impact Wrench

2 Answers

Dont know where to put oil in Craftsman 1/2 " Impact wrench


I just bought one of these also. Manual says oil goes into "the air inlet" which I'm thinking is where you attach the hose. That way the oil is sprayed throughout the interior of the gun once you run air through it.
Question for you: I can't get an impact socket onto this gun, almost seems like the square hole is too small. (yes, both are 1/2" drive). How do you get a socket on this stupid thing?
(man that sounds like I'm an idiot, but I've spent a half hour leaning all my body wight, wiggling, etc. and can't get a damn socket on)

Apr 29, 2010 | Craftsman 1/2" Impact Wrench

1 Answer

Craftsman 1/2 inch impact wrench,not working


Make sure you have at least 90 pounds of air and if you do you need to oil the wrench air tool oil pour some in the where the air line hooks up ..air tools need to be oiled daily cause compressed air cause water vapors to build up when you use it and then when it sits it begins to rust a bit and the oil stops this ...

Nov 14, 2009 | Craftsman 1/2" Impact Wrench

1 Answer

Air impact tool does not engage but will eventually engage after switching directions.


Although I do not have a Craftsman, I have taken severl othe brands apart. They all seem to be much the same. You do not need specialized tool. You just have to be mechanically savey. I think the grease has thickened up too much so taking it apart and cleaning it should do the trick. Start at the working end end and separate the front end. Work on a clean bench where little items (screws, ball bearings etc) won't roll off and get lost. When the two parts are separated, you should see the hammer mechanizm and a lot of grease. remove and clean everything that you can. Re-lube the mechanizm with a light lube grease and re-assemble. Turn the socket drive by hand to make sure everything is free, then apply a liberal application of air tool oil to the air port of the gun and attach an air line and give it a try . Put a load on the socket to check for impact functioning properly. I hope this helps

Jun 02, 2009 | Ingersoll Rand 271 Super Duty 1 Inch...

1 Answer

Craftsman 1/2' impact gun


Use a good grease. Don't pack it, just lube the parts. If it is all together, put in about half an ounce of air tool oil through the plug.

Apr 15, 2009 | Air Tools & Compressors

1 Answer

Oil leaking from nose section of Porter Cable impact wrench


A little oil is normal...actually it's a special grease.

Apr 05, 2009 | Hammering

Not finding what you are looking for?
Craftsman 1/2" Impact Wrench Logo

Related Topics:

297 people viewed this question

Ask a Question

Usually answered in minutes!

Top Craftsman Air Tools & Compressors Experts

John Trevino

Level 3 Expert

1383 Answers

JOHN LAPIER

Level 3 Expert

2428 Answers

Joe Garcia
Joe Garcia

Level 2 Expert

205 Answers

Are you a Craftsman Air Tool and Compressor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...