Question about Cycling

Open Question

Ive got a Ryder F-09 Trip meter on my bicycle. I changed the battery and now need to reset it for my wheel size. How do i know what code to put in?

It is a 4 digit number that you must set when you first switch on the meter

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 84 Answers

SOURCE: Bicycle Model Trek 7.1 fx Wheel

Your best bet it to pop a wheel off and head on down to the local bike shop. If you are planning on building a new wheel, make sure you know what your getting into. It isn't just screw the spokes in and go, you need some very expencive specialized tools.

Posted on Jul 13, 2011

dunnbiker
  • 8546 Answers

SOURCE: I have a sigma 506

Roll the wheel one revolution and enter the ditance in millimeters..

Posted on Sep 16, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to change modes in trip meter of swift car?


Depends on the model but looking at the dials, the left one might have a plastic button protruding from the glass with trip marked! Press and hold till the trip resets to 0!

Nov 23, 2014 | 2010 Suzuki Swift

1 Answer

Lost Manual for CON-TEC 800


Hi, you can download the Con-Tec 800 manual free of charge from here:
http://www.contec-parts.de/wp-content/uploads/2012/09/CON-TEC-800-Manual.pdf

Jun 02, 2013 | Cycling

2 Answers

The wheel size chart in the instruction manual does not include a tyre size of 700 x 54c (29 x 2.1) so I can't set it. Can you advise the setting requied?


It's in the manual. Measure the wheel size and enter it manually.

http://www.sigmasport.com/en/allgemein/showdatei/?download=1&name=2_1_Manual_BC_1106_nat.pdf


There's a picture of how to determine the circumference by rolling the wheel one revolution and measuring it. Be as accurate as you can (to the mm).

4. Wheel size BIKE 1

• Press MODE to change to BIKE 1.

• Press SET briefly and the first digit flashes.

• Set the value by pressing RESET, change to the next digit by pressing MODE.
• Bike 1 is always the bike with the handlebar holder WS 1

Feb 05, 2011 | Sigma Sport BC1106 Dts Wireless Bike...

1 Answer

Changing my oil need to know how to reset mant reqd light


Put the ignition key on , using trip meter button switch display to odometer.
Switch ignition key off.
Press and hold trip meter button , switch the key on ,
continue to hold button for at least 5 sec.
Display indicates " 000000 " and " MAINT REQD " lamp will go off , resetting is complete.

Jul 02, 2010 | 2004 Lexus ES 330

1 Answer

How do you reset the trip meter?


there's just one button on this unit if i recall. so just get to the screen where it shows the trip meter, and press and hold the button until it resets.

Feb 17, 2010 | Topeak Panoram V12 Mini 12 Function Cycle...

6 Answers

Lost manual to Bell wireless bicycle computer


Here are some things the book doesn't tell you:
You have to completely reset the speedometer and lose your odometer to reset the MPH. Hold both buttons for 3 secs to get reset. (Remember to use the left button to walk through the setup process and use the right button to change the settings.) First set the wheel size using Ideluna's settings above on this page (right button to change the setting and left button to go to next number). Next is MPH/KPH, after wheel size setting, push left button again and km flashes. Push right button to change the setting to MI. Next is TIME. Push left button and you'll see the time. Hold down left button till 24hr appears. Push right button to change to 12hr. Then push left button to go to flashing hour. Change with right button. Then left button to go to flashing minute. Right button to change minute, hold down to change minutes fast. Now you are set up. Now the process changes, use the right button to walk through the menu and use the left button to reset. Don't push both buttons anymore unless you want to reset everything again. If you want to reset something just hold the left button down until 0. When you are in SCAN mode, push the right button to go to Time, To go back to SCAN once, hold the right button down - It will scan everything once and return to TIME. To go to ODO, push right button once, push again for DST, push again for MXS, push again for AVS, push again for TM, push again for SCAN to stay in SCAN.

Mar 24, 2009 | Cycling

Not finding what you are looking for?
Cycling Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cycling Experts

yadayada
yadayada

Level 3 Expert

75066 Answers

kakima

Level 3 Expert

102366 Answers

John Egan
John Egan

Level 2 Expert

73 Answers

Are you a Cycling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...