Question about Fuji Cameras

1 Answer

I have fujifilm s5000 when switched on it will go to standby but goes off when switched to camera.

Posted by on

  • bruce lewis Feb 23, 2012

    i don't have a white screen when switched to camera it goes off

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 21 Answers

Maybe because you have a bad lens or somes\times called lens error,Lens errors (system errors) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them:thanks and good luck

Posted on Feb 23, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 2 Answers

SOURCE: Fujifilm Digital camera S5000 -

What is fine no. full mean. With new batteries and a fresh card, when I turn on the camera to shoot pics, this message comes Up and no pictures can be taken.

Posted on Jun 15, 2008

pauman
  • 248 Answers

SOURCE: Fujifilm Finepix S5000

the problem might be inside. when cameras are dropped cable connections inside loosen. try to bring it to your local camera specialist and have it checked. if you open it yourself it might cause more damage.

Posted on Jun 19, 2008

zohail
  • 1223 Answers

SOURCE: i have a fujifilm finepix S5000 when camera is

if u see white screen and lcd show info and signs and pictures also turn out to be blank when u see them on pc

CCD Failure has occured !

dont worry i have the same problem with my S5000 i contacted fuji and they repaired it free of charge bcoz it is a known problem in thousands of cameras of different brands just call them in ur area and they will do it free of charge

see this
http://www.imaging-resource.com/badccds.html

for support in usa or select different region www.fujifilm.com

http://www.fujifilmusa.com/support/ServiceSupportContact.do

Posted on Apr 09, 2009

zohail
  • 1223 Answers

SOURCE: Fuji S5000 Switch on it goes to review

it might be

CCD FAILURE

CALL FUJI for FREE repairs u are eligible i got mine repaired free it is a known problem

Regards

Zohail

Posted on May 29, 2009

  • 275 Answers

SOURCE: FUJIFILM FINEPIX S5000.No image on viewfinder or LCD.

I think there is a small button on the back of the camera near the bottom that turns the viewfinder off and on I think. It should be in the manual.
It might have gotten bumped while in the bag.

Posted on May 24, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Fujifilm S5000 !hand error


It it in normal shooting mode? The hand means the shutter speed is too slow to hand hold the camera.

Jul 24, 2009 | Fuji FinePix S5000 Digital Camera

2 Answers

Fujipix S5000 screen is all white


I just started having the same problem with my S5000, also.

Jul 11, 2009 | Fuji FinePix S5700 Digital Camera

1 Answer

Change from black and white to color


There is a little blue button next to the LCD button, directly above the display screen. There are alot of controls when you press, like color, B&W, shutter speed, etc. Thanks

Sep 29, 2008 | Fuji FinePix S5000 Digital Camera

2 Answers

Fuji Finepix S5000 ccd sensor


Send it to the Fujifilm camera repair center. The S5000 has a known issue with bad CCD sensors... Unless you want to do it yourself.

Jun 26, 2008 | Fuji FinePix S5000 Digital Camera

1 Answer

Software


This may be what you need:

http://www.fujifilm.com/products/digital/download/02/ist.html

Either way, that's the FujiFilm website, so it should be somewhere. All I found was updates for different versions (i admit i didn't spend too much time looking).
www.fujifilm.com is the original website, so I recommend you go the go, select country, select camera, etc instead of typing in the link above (it will probably be dead.....it always happens).

Jun 19, 2008 | Fuji FinePix S5000 Digital Camera

1 Answer

Fujifilm Finepix S5000


the problem might be inside. when cameras are dropped cable connections inside loosen. try to bring it to your local camera specialist and have it checked. if you open it yourself it might cause more damage.

Jun 10, 2008 | Fuji FinePix S5000 Digital Camera

Not finding what you are looking for?
Cameras Logo

Related Topics:

20 people viewed this question

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

kakima

Level 3 Expert

102366 Answers

Greg Cann
Greg Cann

Level 3 Expert

1114 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...