Question about Televison & Video

Open Question

Toshiba DC-LWB1 remote control

How do I program it to turn the tv on and off? It was setup to turn on the Dish Network Box, but I want it switched back. What is the sequence of buttons you hit to program it to control the tv again?

Posted by on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 336 Answers

SOURCE: dish network remote stopped working for on and off and volume

First before trying to repair the remote lets try to just reprogram it. The easiest way to do this is to do a search. 1st Turn the tv on, then on the remote press and hold the tv button until it flashes. Next press the tv power button. Next press the up arrow button slowly until the tv turns off. Then hit the # key. Now if you pressed the up arrow to many times and the tv doesn't respond to the remote just start the process over, except using the up arrow use the down. You may have to push the up arrow button many times before it finds the code. The batteries usually last quite a while since there are 4 of them. If this doesn't work call 1-800-333-dish they will either send out a tech or just mail you a new one. If you have the user guide for the 722 the instructions to do this are on page 82.

Posted on Sep 16, 2009

toddg
  • 171 Answers

SOURCE: REMOTE CONTROL

If you're lucky it will respond to code 10178, if not then you will need a rc64 directv remote and try the proview codes. The proview codes are worthless in any other directv remote other then the rc64 series.

Posted on Oct 04, 2008

  • 374 Answers

SOURCE: need codes for a phillips magnavox for dish network controller

Follow this link and got to the remote section. Once there shoose the type of remote you have and select remote codes to get the ones for that particular remote that may operate the piece of equipment desired. I hope this is of assistance to yoiu and thanks for using Fix Ya. Please let me know if I can be of further assistance.
Jim

Posted on Nov 11, 2008

ward_knutson
  • 64 Answers

SOURCE: dish network remote with a element tv

Since you dont have a popular brand set you should try using the scan method. Here is a link with a video to help program your dishnetwork remote to work with your set. http://www.disheez.com/videos/dish-network-video/programming-dish-network-remote/

Posted on Nov 25, 2008

  • 247 Answers

SOURCE: programming a hitachi remote to a dish network box

i would try to reprogrsam the remote first. do yuo have the owners manual to do this?

Posted on Dec 18, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Cant change channels on my new Vizio HDTV with the dish network remote


There is no setup codes for Vizio TV with Dish Remote control.

Jul 25, 2012 | DISH Network IR Remote Control

Tip

DISH VIP612 Program AUX Remote Code


DISH Solo DVR VIP612 Program AUX Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR VIP 612 to control your receiver, tuner, stereo, second TV or second VCR using your remote's AUX mode? (Instructions to setup a primary TV or a VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a device with the AUX mode:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR VIP 612 User Manual.
  3. Press and hold the AUX mode button until all the other buttons light up, and then let go. The AUX mode button will flash.
  4. Press 0 for a TV, 1 for a VCR, or 2 for a receiver, amplifier or tuner.
  5. Enter one of the three-digit codes from the tables in the manual.
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 7 with the next device code from the tables in the manual.
Your device control codes for your amplifier or other AUX device are now programmed into your DISH Solo DVR ViP 612.

Now you probably want to set your Dish Solo DVR VIP 612 Universal Remote up so that it always controls the volume of your stereo, rather than of your TV, regardless of whether it is in SAT, TV, VCR or AUX mode. Help for this remote control programming can be found here.

(Help for programming a TV or VCR using the TV or VCR mode buttons can be found here.)

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

Tip

DISH Solo DVR VIP612 Program TV VCR Remote Code


DISH Solo DVR VIP612 Program TV or VCR Remote Code

7c06801.jpg

Would you like to program the Universal Remote that came with your Dish Solo DVR 612 to control your primary TV or a VCR? (Instructions to setup a receiver, tuner, stereo, second TV or second VCR are a little different, but can be found here.)

e818a57.jpg

To setup your Dish Solo DVR VIP 612 Universal Remote, follow these steps to enter the remote control codes to control a primary TV or a VCR:

  1. Turn the device you would like to control on.
  2. Find the brand name of the device you would like to control in the control code tables on page 112 of the Dish Solo DVR 612 User Manual.
  3. Press and hold the mode button (TV or VCR) until all the other buttons light up, and then let go. The mode button will flash.
  4. Enter one of the three-digit codes from the tables in the manual.
  5. If you want to program Limited Mode, press 1. If not, skip to the next step. (You can add or remove Limited Mode later.)
  6. Press POUND (#). The mode button will flash three times.
  7. Press POWER to turn off the device. If the device does not turn off, skip to step 9.
  8. Turn the device back on and try some of the other buttons to make sure they work. If the code works, stop here.
  9. If the code didn't work, repeat steps 3 through 8 with the next device code from the tables in the manual.
Your device control codes for your TV or VCR are now programmed into your DISH Solo DVR VIP 612.

Help for programing a tuner, receiver, 2nd VCR, or 2nd TV using the AUX mode button can be found here.

I hope that helps.
________________________________________________________________
DISH Solo DVR VIP612 Manual Download
DISH Solo DVR VIP612 Quick Reference Download
DISH Solo DVR VIP612 Remote Code Scan
DISH Solo DVR VIP612 Program TV VCR Remote Codes
DISH Solo DVR VIP612 Program AUX (Stereo/Receiver) Remote Codes
DISH Solo DVR VIP612 Amplifier Control
DISH Solo DVR VIP612 What Is Limited Mode
DISH Solo DVR VIP612 Change Limited Mode

on Jul 05, 2010 | DISH Network ViP 612

1 Answer

I need the code for tv rsa


Hello,
The codes and instructions are different for each of the Dish Network boxes. In order for us to give you a direct and comprehensive instructions, we would need to know the model number of your Dish Box as well as the device (TV) you want to program.

If you prefer to look this information up, you can visit the Dish Network Remote Control instructions posted on their site: http://www.dishnetwork.com/SupportSection/remote-setup

Please let me know if I can further assist you.

Regards,
KYTechnology

Mar 01, 2011 | DISH Network IR Remote Control

1 Answer

I am looking to programming my remote to work with both the television and my dish network box...got any suggestions


Hello!!!!!! To program your remote to your tv then your receiver is simple!!!! Follow these simple step in thelink below, and you will be good to go!!!!! Program your remote to your tv first ( step 6 and on), then program to your receiver (step 1-5). You will want to make sure that when you are programming the remote to your receiver, you will want to be in front of the receiver box. :) Hope this helps!!!


http://www.dishnetwork.com/SupportSection/remote-setup

Becki Barned
DISH Network Customer Service

Dec 23, 2010 | Insignia 32" 720p Flat-Panel LCD HDTV

1 Answer

Well I have two Dish network boxes, one being the 720 (DVR) and the second being a basic HD box. The volume control works perfectly on the HD box, but doesn't on the other TV using the 720 series box. Is...


Hello, you will probably will just need to try to program your remote to your tv. You can follow the steps to get this working. This may have been resolved, but you can do this in the future, or if you have any questions. I hope this helps. You will want to follow steps 6 and beyond.

http://www.dishnetwork.com/SupportSection/remote-setup


Becki Barned
DISH Network Customer Service

Sep 30, 2010 | DISH Network IR Remote Control

1 Answer

Programme remote to work with sony tv


To program your DISH Network remote to your Sony TV you will simply- press and hold the TV Mode button until all the other mode button back lights illuminate, then release.

-Now while the TV mode button is blinking please enter in the remote code 500 which is the remote code for your Sony TV after entering 500 then press the pound (#) key.

-After pressing the # key on the DISH Network remote, the TV mode button should blink 3 times and then turn off completely. This will mean the programming of the DISH remote to your TV has been completed successfully. While still in TV mode try any of the functions on the remote, such as turning the volume up or down on your TV or attempting to press the power button.

-The DISH Network remote should now be programmed to control your TV.

-If the remote code 500 doesn't program the DISH Network remote successfully you can also try each of the following using the same procedures, 000, 590, 640, 502, 002, or 567.

I hope this resolved the issue for you! Please feel free to contact us if you need any additional assistance.
-Kirstie DISH Network

Sep 16, 2010 | DISH Network IR Remote Control

1 Answer

I have a dish 625 box and duo tv's. #1 remote works everything, but remote 2 will not turn tv on or off or control volume. Tech did have both of them working originaly but we had some issues and now cannot...


grandygram,

I have provided a link on programming your TV 2 DISH remote to your Philco TV. Here is the link:

http://www.dishnetwork.com/SupportSection/remote-setup

The steps are towards the bottom of the page. The codes that have the highest success rate are listed below.

566, 653, 654, 655, 656, 659, 660

I hope this helps.

Ray Calo
DISH Network

Apr 23, 2010 | DISH Network DVR-625 DTV Receiver /...

1 Answer

Panasonic TX P50V10B Plasma TV


In order to get any of the Freesat channels, you need to connect a Satellite dish to your TV. If you have a Sky dish, you simply need to run an extra Cable from the LNB from the dish and connect to your socket on the back of your TV.
In order to get Freeview channels and Analogue channels, you need to connect a aerial to the back of the TV.
There is a menu option for the TV to start straight to the AV input (your Sky HD box). It is Menu > Setup > Other Settings > Power on Preference. Select 'AV' for your TV to start on Sky HD.
Also even if you have your TV to start on TV, when you turn on your Sky HD box, it should automatically switch to the Sky box.

Oct 28, 2009 | Panasonic Televison & Video

1 Answer

Hdtv only the power button work.


What "inputs" are on the back of the TV,
so that you can connect the PlayStation and/or the DVD player?

Is there a "setup" button on the TV itself,
and "up/down" and "left-right" and "select" buttons,
that you can use to tell the TV to accept input from "tuner" or "cable" or "DVD" or "Composite" or "SVGA" sources?

Can you telephone the Dish Network support-desk, and get them to "program" your Dish Network remote-control with the specific settings for your specific brand/model of TV?

Apr 28, 2009 | Microsoft Windows XP Home Edition

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

399 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

73691 Answers

Cindy Wells

Level 3 Expert

5060 Answers

Electro Med Services...
Electro Med Services...

Level 3 Expert

6694 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...