Question about Jensen's VM9312 Car DVD Player

1 Answer

My mute button will not go off on my deck.

Every thing works fine on my deck. Just cant hear music comeing out of it. it's saying that it is on mute. so i push the mute button and all i hear is a beep. so i hold the mute button and it turns off. I reset te deck but nothing happens. Still on mute. i dont know if it had a remote. I just dont know what to do. Can someone help me

Posted by on

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Turn volume button up

Posted on Dec 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Eclipse avn 5435 deck plays fine but once in a blue moon no sound comes from it. Only using rca on unit, gps works fine. I unplug all connectors and then works fine.


Jess, do a wiggle test on cables when you have volume, wiggle wires one at a time to see if sound goes out or static.
press the helpful button

Feb 07, 2016 | RCA Car Video Players

1 Answer

My clarion nx500 radio mutes my music coming from my phone when I crank truck but works fine when key is turned over


Some cars will disconnect power to some accessories while cranking the engine. This is normal.

Jan 11, 2015 | Clarion NX500 Car Video Player

10 Answers

Everything works fine when i play a cd it works it reads it but dont hear the music when i turn to radio i hear the music,just wondering what could be wrong help me out thanks..


First off how long have you owned the unit? Did you buy it new? Did it ever work playing cd's? it sounds like either a setting problem or a hardware problem with the unit. Once I have more information I can assist you further in trying to isolate the problem.
Thank you,
Lee

Mar 31, 2010 | Kenwood KVT-817DVD DVD/CD/MP3/WMA 7"...

1 Answer

The power buttons doesnt turn off and is there a


there is a power button on your deck, but you must get to the screen where the clock is, touch the button and it will shut off, if not then we need to trouble shoot the situation, which is easy, if you take out your deck. and if you can find the blue wire w/ the white stripe that is located on your deck this is your remote wire, this cut the deck on and off, when hooked up properly, first your gonna need to extend this wire, so it can reach the fuse panel, then you need to locate the fuse that says cigarette lighter, pull the fuse out, and stick the extended remote wire there, then reinsert the fuse. now the deck should be off, now if you put the key in and turn it to on, the deck will come on, and when you turn the car off, it will swtay off, this will work i bet my rep on it.

Feb 19, 2010 | Pioneer AVIC-D2 In-dash Car Audio Stereo...

2 Answers

Where is the rest button


the reset button is the extreamly small button on the lower left hand corner of the deck a paper clip will work fine to press this button

Sep 21, 2009 | JVC KW-AVX810 Car DVD Player

2 Answers

Wiring uv7i


you can use the deck without a remote, the only thing is you cant go into the system without the codes. there is a sequence code you must enter to disable it. there are a couple of videos on youtube but none for the uv7i. trust me, i 've been there on and off since the summertime. i am not sure if the sequence works due to me not hooking it up to external monitors but you can disable the blue screen with a on/off switch...only problem is, you'll have to do it everytime you turn your car on. here's what you do....
buy a on/off switch(radio shack $3)
hook the pink wire to one part of the switch-the other to the negative ground
put a dvd in(from what i hear, it must be store brought), wait unntil the blue screen comes up
turn the switch off...wait two seconds/turn on...wait two seconds/turn off...wait two seconds and turn back on. the blue screen is gone and video is on. ifyou still need the diagram, i'll scan mine for you.

Nov 09, 2008 | Phase Linear UDV9010 Car DVD Player

2 Answers

Forgot my security code


the guy that wrote how to unlock the receiver left the most important parts out... guess dint wanna be helpful...

Bypass code for radio that our locked



Thank you for your e-mail. Put in the same number 3 times (example 1111) until it locks and then push in the mute bottom and hold it and while you hold the mute button with your other finger push in the volume control (power button) and hold both of them until a new screen comes up and then put in 122164 and hit OK and that should work.





let me break it down you do not need the remote...

first put the same number in (e.g 1111 enter this number 3 times) second after the device locks on the radio hold the mute button while holding that press in the volume nob (e.g power button) hold them both till another screen comes up and enter 122164 and press ok and your all done... this solution works on all dual indash dvd players

Feb 16, 2008 | Dual XDVD8181 Car Video Player

1 Answer

Stuck mute


I had the same problem. Deatache the mute wire. That is for cell phones. I think it is the brown wire but I cant be sure. Look over the wiring diagram and it will say Mute. Don't wire this wire in.

Feb 06, 2008 | Jensen VM9510 Car DVD Player

4 Answers

Screen won't come out


My display started clicking then finally stopped working and would not come out. I took it apart and found two teeth broken on a gear. i replaced the gear, now i works fine.

Aug 27, 2007 | Pioneer AVH-P6500DVD Car DVD Player

Not finding what you are looking for?
Jensen's VM9312 Car DVD Player Logo

Related Topics:

188 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jensen's Car Video Players Experts

Richard Foster
Richard Foster

Level 2 Expert

71 Answers

Robert marquette

Level 2 Expert

102 Answers

Jose Velazquez
Jose Velazquez

Level 2 Expert

227 Answers

Are you a Jensen's Car Video Player Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...