Question about Storage Controllers

1 Answer

I need to install printer without disk

I need to install my printer and do not have my disk. How do i get the software to install it?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Contributor
  • 35 Answers

Even without the Installer discs, you can still install the driver / software by just downloading it from the internet. You should check the brand of the printer and access the support website and look for the particular model to be able to download the Software / Driver.

For HP printers, access the link below and just select the model of the printer :
http://welcome.hp.com/country/us/en/support.html?pageDisplay=support&jumpid=in_R329_prodexp%2Fhhoslp%2Fsplit%2Fsupport

For EPSON printers, access the link below and just select the model of the printer :
http://www.epson.com/cgi-bin/Store/support/SupportIndex.jsp?BV_UseBVCookie=yes&expansion=1000000

For Lexmark printers, access the link below and just select the model of the printer :
http://downloads.lexmark.com/perl/downloads/downloads.cgi?ccs=229:1:0:0:0:0

For DELL printers, access the link below, click drivers and downloads and just select the model of the printer :
http://support.dell.com/

Posted on Oct 28, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I'm running windows 7 32bit and want to install a SATA port expander but there are no instructions on doing it without makeing the a RAID aray.


You should have posted the model of what you want this on, usually the reason is to add RAID so its faster.

You could use USB 3.0 ports for your drives and get the same speed you will get from Sata 2 using HDD.

Try just plugging it in, run windows update, then go to ADMIN tools, computer MGNT, storage, disk MGT, see if you can see the added storage, then just Look for the unpartitioned HDD usually represented by a black header
right click it and select format.
on the following instructions

Feb 23, 2013 | Vantec UGTST310R PCI Host Card 6 Port 4...

1 Answer

Drivers for xp


click start control panel administrive tools computer management device manager scroll down universal serial bus controllers you could see a yellow question / exclamation mark? ! or a red X

you will need to update/reinstall drivers

right click to reinstall drivers

if you can see your usb drive but its not working
ports(com&lpt)right click update driver
if your computer came with a motherboard disk the drivers could be on it
if you dont have disk with the drivers you need to download them
http://download.cnet.com/usb2-0-driver-zip/3000-18493_4-163914.html

http://download.cnet.com/slimdrivers-free/3000-18513_4-75279940.html

if these driver packages are not right
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
(be precise)also the download software finder under that there will be a list place a tick in the box of any one you want/need
all software windows software mac software mobile and web apps

http://majorgeeks.com/downloads35.html

also this link will provide you with many freeware and share drivers

hope this helps you

Aug 25, 2011 | SYBA (SD-NECU2-3E1I) (SD-NECU2-3E1I) USB...

1 Answer

I CANT SEE MY HDD PORTABLE WHEN I INSTALL WINDOWS 7.I HAVE NO DRIVER OF SD-SIL680-RAID CONTROLER


the drivers might be installed properly for this device
click start control panel administration tools computer management device manager scroll through all of your devices if you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver
if you can see your usb device but its not working sroll to Ports(Com&Ltd) right click to update driver if you computer came with a motherboard disk the drivers could be on it

or you might have to download one
http://download.cnet.com/sata-driver-intel-ver/3000-2122_4-162224.html
if this is not the right driver package
http://download.cnet.com/2000-20_4.html
on the home page you should see a search tab just type in what you are looking for
(be precise)also the download software finder under that there will be a list place a tick in the box of any one you want/need
all software windows software mac software mobile and web apps

http://majorgeeks.com/downloads35.html

also this link will provide you with many freeware and share drivers

hope this helps you

Aug 24, 2011 | SYBA SD-SIL680-RAID Ultra ATA 100/133 IDE...

1 Answer

I have got a big problem for my wdc wd6400aaks hard disk. Few months ago i separated hard disk into 4 partition (named as DATA, Install, Slave and Local disk). But XP2 had auto numbered my partitions and...


no no you need only slave c your sata only f drive is a out side hard drive e is your sec cd dvd player d is is your floppy disc ran off you slave mane cd player ok here what your going to have to do reset everything in fresh formate with your reboot disc.

Feb 13, 2011 | Western Digital Storage Controllers

1 Answer

I am trying to install win xp with sp2 on my laptop. i was using vista on it before . it show this error message; A problem has been detected and windows has been shut down to prevent damage to your...


If you want both OS you need to do a partition on the HD to proceed.IThat what i can figure from your quest.But if you just want XP just do a clean installation of it.

Perform a clean install of Windows XPA clean installation consists of removing all data from your hard disk by repartitioning and reformatting your hard disk and reinstalling the operating system and programs to an empty (clean) hard disk. For more information about important things to consider before you partition and format you hard disk and how to partition and format your hard disk by using the Windows XP Setup program, click the following article number to view the article in the Microsoft Knowledge Base:313348  (http://support.microsoft.com/kb/313348/ ) How to partition and format a hard disk by using Windows XP Setup programTo perform a clean installation of Windows XP, follow these steps:
  1. Back up all important information before you perform a clean installation of Windows XP. Save the backup to an external location, such as a CD or external hard disk.
  2. Start your computer from the Windows XP CD. To do this, insert the Windows XP CD into your CD drive or DVD drive, and then restart your computer.

    Note To boot from your Windows XP CD, the BIOS settings on your computer must be configured to do this.
  3. When you see the "Press any key to boot from CD" message, press any key to start the computer from the Windows XP CD.
  4. At the Welcome to Setup screen, press ENTER to start Windows XP Setup.
  5. Read the Microsoft Software License Terms, and then press F8.
  6. Follow the instructions on the screen to select and format a partition where you want to install Windows XP.
  7. Follow the instructions on the screen to complete the Windows XP Setup.
If you have successfully installed Windows XP, you are finished. If these steps did not help you install Windows XP, go to the "Next Steps" section.

Oct 06, 2010 | Promise SATA300 TX2plus...

1 Answer

Hi, trying to install windows xp on an acer 5920g. After the installation cd asks you to hit the enter key to start the installation there is a complaint about not finding a hard drive to install to. I...


You do not need a hard disk controller driver. The hard disk is configured in the BIOS automatically.
If Windows install cannot detect the hard disk then either the hard disk is faulty or the motherboard disk controller is faulty.
Re-seat the hard disk, it may not be making proper electrical connection and then go to the BIOS configuration to see if it detects the hard disk, if not then the hard could be faulty or the disk controller is faulty. In most cases it is the hard disk that is faulty.
To further test the hard disk, remove the hard disk and connect it to an USB hard drive adapter, then plug it into a working computer's USB port. If this computer does not see it as an external hard drive or you cannot open the various folders and files, then the hard disk is definitely faulty.
Then you need to replace the faulty hard drive.

Feb 24, 2010 | Acer (91AD275018) SCSI Controller

1 Answer

Sabrent 5in1 USB-DSC5 USB2.0 to SATA & IDE cables HDD not in Windows Explorer


There shouldn't be any problem accessing FAT32 drives of that size.

Check your disk management (right-click "my computer", hit "manage" and then click on the "disk management")

It should tell you what kind of formatting the disk is, and what the drive-letter is.

If it shows as being FAT32, then you're fine. If it doesn't, the FAT has been corrupted and may require a disk rescue or some kind of disk fixing utility.

Assuming it shows the partition as healthy and FAT32, but it doesn't have a drive-letter, right-click on it and "change driveletter". Pick a letter and hit OK. It should now show up!

Aug 19, 2008 | Sabrent (USB-2535) (USB2535) IDE...

3 Answers

Lacie big disk 2.0 usb


For anyone with a Big Disk drive that doesn't get recognised by Windows and gets a TUSB 6250 message in Device Manager, the cause is very likely to be the power supply. Although the drive will be powered up, it is not spinning at the correct speed. I tried all of LaCie's technical support suggestions, some of which are outlined above and none worked. They finally suggested getting a new power supply. This solved the problem (Wattac, £22). This problem has affected a lot of LaCie Big Disk owners...

Mar 26, 2008 | Storage Controllers

1 Answer

SCSI BIOS not installed / ML150G2, exchanged mainboard, RAID


hi..
my guess is no but since i haven't dealt with this type of server i'm going to suggest you go to hp.
if you just goto hp.com and search on live chat and a link will come up.. they should be able to help unless it's too old since i'm not sure what generation we are on now..

good luck, hope this helps a little..d

Feb 23, 2008 | Adaptec (2120S) SCSI Controller

6 Answers

Lexmark 1200 series all in one


I purchased a lexmark 1200 series all in one printer and cannot locate the cd that came with it. Is there a way to install it without the cd? I tried but it says can't find hardware.

Sep 03, 2007 | Storage Controllers

Not finding what you are looking for?
Storage Controllers Logo

Related Topics:

1,726 people viewed this question

Ask a Question

Usually answered in minutes!

Top Storage Controllers Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Robert Graf

Level 2 Expert

156 Answers

Mike McWhinney

Level 3 Expert

537 Answers

Are you a Storage Controller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...