Question about Panasonic PT-47WX49 47" Rear Projection Television

2 Answers

Screen Tilted and Convergence Off

The picture on my projection television is tilted a few inches to the right. When updates scroll across the botton of the screen (espn), it is really noticeable. The tilted of the screen has thrown of the convergence and there is a shadowing effect on the left and right side of the screen. Please, any help would be helpful. Thanks

Posted by on

Ad

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Cposwn, I have the same tv and the same problem as dawgs79. If you could send me the pdf files I would appreciate it. Thanks My email is hcb1k@aol.com

Posted on Apr 28, 2007

Ad
  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 12 Answers

Dawgs79. I have the pdf files for the tv. I own the same one. I can send then to you. It shows the factory settings etc ans how to adjust it.

Posted on Jan 21, 2007

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Picture is tilted and bottom of picture is cut off


Might be convergence problem if looks like at all the attached pictures---I have instructions for this repair and parts cost is not high--about 30 dollars.

let me know if this is the issue and what your skill level is as soldering is involved here.
11_3_2012_4_16_24_pm.jpg11_3_2012_4_16_55_pm.jpg11_3_2012_4_17_37_pm.jpg

Nov 02, 2012 | Panasonic PT-51HX41 51" Rear Projection...

1 Answer

Can't get colors right projection tv


Go into menu with remote and select convergence--see if skewed will it adjust or not?

Apr 27, 2012 | Philips 55PP9401 55" Rear Projection...

1 Answer

Since replacing the bulb, it seems that my picture is tilted to the right about 1/2 inch or so. A local repair shop says the bulb has nothing to do with my problem. Any suggestions on correcting this...


I have the same problem, and all I did was replace the bulb and housing the picture is not a true horizontal, the picture is tilted to the right....Any ideas>>??

Jan 22, 2011 | Mitsubishi WD62628 62" Projection HDTV

1 Answer

Hitachi 53uwx10b Convergence Grid Tilted A Little...


If the tilt is not that bad, I would leave it be. The reason is yes you can straighten the tilt out, but it requires a mechanical alignment to all 3 CRT's then you will have to align the convergence on all 3 as well. Please take a few moments to rate my answer. Thank you.

Nov 18, 2009 | Hitachi 53UWX10B 53" Rear Projection...

1 Answer

Problem after replacing convergence board


Yes, you do need to set up the convergence in order to get the picture geometry correct. the antenna and maybe some other settings will need to be restored through the appropriate user interface screens. You will need your owners manual for a guide.

Jul 12, 2009 | Samsung HCM4215W 42" Rear Projection...

1 Answer

Tilted Screen


Yes, there is a tilt adjust,but you should have service manual to guide you....it requires some diassembly / access in back of set.....................T.

Dec 20, 2007 | Samsung HC-R4755W 47" HDTV

1 Answer

Skewed picture


Convergence problem.
http://home.earthlink.net/~oleg.filippov/ConvergenceFix.htm

Dec 11, 2007 | Televison & Video

1 Answer

Blue shadow


http://www.digitalhome.ca/forum/showpost.php?p=564268&postcount=220
http://cmpalmer.blogspot.com/2006/11/fixing-my-own-tv-part-ii.html

Nov 25, 2007 | Toshiba 53AX61 53" Rear Projection...

1 Answer

Tilted tv screen


The complete convergence for the Philips projection sets usually requires a clear plastic overlay which fits over the screen and has many precisely spaced black dots. The remote is then used to enter the service mode and converge all 3 colors onto the dots, and then the settings are stored in an EPROM IC. This should only be done by someone with experience with the Philips sets.

Jun 25, 2007 | Philips 55PP9363 55" Rear Projection...

1 Answer

Graphics are cut off.


sounds like a sustained board not really sure a picture would help is it just on one side?

Mar 21, 2007 | Panasonic PT-47WX49 47" Rear Projection...

Not finding what you are looking for?
Panasonic PT-47WX49 47" Rear Projection Television Logo

Related Topics:

153 people viewed this question

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

 Grubhead
Grubhead

Level 3 Expert

5515 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

508 Answers

The Knight
The Knight

Level 3 Expert

75767 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...