Question about Element Electronics FLX-18511B LCD TV

Open Question

Element electronics tv blinking d13 light on back

Posted by Anonymous on


2 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 1185 Answers

SOURCE: tv blinks on and off at will

Dry solder joint on pcb most likely cause

Need someone with schematic to chase it down or someone with a set of test boards

No easy answer to this one

Posted on May 23, 2009


Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Blinking screen

These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
Blinking codes details of many popular brand TVs are given. Surf the site with patience.
If blinks continue without any pause, the main board is faulty.

Feb 08, 2016 | Polaroid 899-KR2-GF3217XA2H Main Board for...

1 Answer

Power light blinks blue

Sometimes this kind of behavior indicates that the TV needs to be reset. Unplugging it overnight should cause a reset. Often the underlying problem returns, however. Good luck!

Jul 30, 2014 | Element Electronics Televison & Video

1 Answer

Led light blinking

It is likely that the internal power supply has failed.

Dec 08, 2013 | Element Electronics Element 40" LED 1080P...

1 Answer

Reseting error code on blanco dishwasher

My Blanco BSD9XP displayed the same d13 error. I fixed the problem by replacing the thermistor (Part No. 32X2023). The d13 error remained after the fix but disappeared after I ran the dishwasher through the Test Program. Start the Test Program by holding in the Delayed Start button (has a clock image on it) and simultaneously pressing the Start button ( diamond / C) five times. See the attached description of the Test Prgram to understand how it operates. The second page sets out test parameters for the various elements of the dishwasher.


Nov 29, 2013 | Dishwashers

1 Answer

Visco vsc20v1 will not powers on and right back off

How many times this standby/power light blinks at one time switch ON? Count it carefully. These blinks are fault indication, and known as blinking codes. From the number of blinks occur at one time switch ON; you can get an idea about the faulty circuit stage inside the TV. This will make repair easy. For more information, check the link

Nov 22, 2013 | Element Electronics FLX3711B 37 in. LCD TV

1 Answer

What do i do when i turn my tv on and it just blinks red and blue light

Sounds like bad capacitors on the power supply board which is a very famous issue for most LCD TV power supplies.

Oct 30, 2012 | Element Electronics FLX3711B 37 in. LCD TV

1 Answer

Red light blinking in back. no picture or sound

That symptom is cause of power supply problem.The power supply have abnormal output voltage cause of leak capacitor.Its better to replace all the leak capacitor of the power supply to make the power output make normal voltage.Thanks...

Aug 24, 2011 | Element Electronics FLX3210 32 in. LCD TV

1 Answer

Replaced 3 capcitors today and tv still wont power up, element flx3711b lcd tv

check D7 and small cap to the right(forgot # returned tv) in the power supply area.i found diode leaky and cap dry.Thats how i fixed the blinking red light.hope it works.

Mar 07, 2011 | Element Electronics FLX3711B 37 in. LCD TV

1 Answer

I possibly had a surge on my Element FLX-3711B Tv. It was also connected to a sony surround sound station. The sont was off for a while but reset it self after awhile and now works fine. My TV has not...

Tv now have LED indication power light on the screen panel blinking light or totally dead,no light at all?The power supply board,that the board where the power a/c cord plug into it.That the power supply board is dead.Tries websites like, to buy a whole refurbish power supply board for the replacement.

Jul 16, 2010 | Element Electronics FLX3711B 37 in. LCD TV

Not finding what you are looking for?
Element Electronics FLX-18511B LCD TV Logo

Related Topics:

34 people viewed this question

Ask a Question

Usually answered in minutes!

Top Element Electronics Televison & Video Experts

Cindy Wells

Level 3 Expert

5418 Answers


Level 3 Expert

489 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you an Element Electronics Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides