Question about Zanussi ZDF490 Electric Double Oven
Still power on as top oven works fine.
I suspect that you did cut power to the oven when you replaced the element. therefore the oven needs to be reset as new. there are quite a few pages of instructions on setting the timer so be prepared if you are going to to proceed with this "little" project.
I was able to locate your manual online here:http://kitchen.manualsonline.com/manuals/mfg/zanussi/zuq_875.html?idRes=625295
I suggest unplugging it for a few minutes...then plugging it back in. Hopefully if the electrical is good you will see the oven's timer flashing. then you can proceed with the instructions from page 7.
Otherwise, you may have a blown a short and should get a licensed electrician to look at it.
Another option would be to contact the manufacturer:firstname.lastname@example.org
Or, find the bloke that installed it and invite him over for dinner and maybe he'll notice it's not working and will fix it for free! ;-)
Good luck mate!
Posted on Feb 23, 2012
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
have you reset the clock after the power outage?
this is necessary before oven will work
suspect you have it on auto in error
Posted on Oct 01, 2008
SOURCE: main oven wont work
It is the oven element that has failed
Remove panel at rear of oven compartment, there you will see the element, just undo any screws that you can see and pull the element towards you, carefully detach the wires, but don't loose them inside or you will have remove the oven to get the wires back on.
Fit new element and Bob's your uncle ,you've cracked it.
Plz leave feedback for this solution.
Posted on Dec 13, 2008
You need to replace the round fan oven element located at the rear of the oven compartment behind a removeable cover where the fan is located.
Posted on May 14, 2010
Testimonial: "Thankyou - i did not know there was another element in there!! I cannot believe how expensive these ovens are considering the simplicity of their construction and low cost of the components inside.. Thanks again..!"
Most likely it is a faulty oven heating element.
You will need to replace the element.
Usually the element is a circular shape which is situated near the fan, normally you will need to remove the back of the oven, Switch off the power at the wall first, locate the element and remove the fixing screws and electrical connections then fit the new element and reconnect.
Only attempt this replacement if you are confident to do so and have a basic electrical and mechanical knowledge.
Posted on Dec 11, 2010
Tips for a great answer:
Feb 01, 2011 | Neff U1721 Double circotherm Electric Oven
Sep 06, 2010 | Stoves 720EF Electric Double Oven
Jul 29, 2010 | Electrolux EOB5630 Ultrafan Electric...
Feb 24, 2009 | Bosch HBL 5032 Electric Single Oven
Jan 05, 2009 | Tecnik TKC8525 Double Oven
Nov 28, 2008 | Hotpoint DY46 Style Line Stainless Steel...
Dec 12, 2007 | Frigidaire PLEB27T9DC Electric Double Oven
197 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: