the control panel will not respond the clean light is on and the normal wash light is light no...
(More)
the control panel will not respond the clean light is on and the normal wash light is light no buttons give response
Dishes in upper tray coming out "not so clean". Disconnected Upper Arm mechanism and Lower...
(More)
Dishes in upper tray coming out "not so clean". Disconnected Upper Arm mechanism and Lower Wash Arm mechanism and checked all the tubes to make sure they are free of any debris and they are. Ran dishwasher with a Thermocouple Probe attached inside and the temperature measured 140° F during the "Normal Wash Cycle" so I was good there, and the water pressure measured 60 psig. Ran again and the same result, the dishes on the bottom tray seem to come out clean but the top tray still has a dirty dish result. I positioned the the Top Tray spray agitator and while the dishwasher was running I would open the door and see if it moved. If I did this real fast the agitator or spray arm would not move, but, when I let the dishwasher run for maybe 10 to 15 seconds and opened the door it would show that it did in fact move so I figured it needed a brief period for the water to get up to this device. Appreciate any suggestions!