- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
If you have the old firmware then all you need to do is ground the parking brake wire OR if you have the new firmware(just bought the system) a toggle switch is involved: 1 - connect e-brake wire from dvd unit to the switch 2 - connect a ground wire from switch to the unit chassis(any good metal grounding surface will do) 3 - pop in a dvd, toggle the switch back and forth 2 or 3 times depending on what wire you placed where...and voilaa!! your dvd system should work in motion!!
here's the code. I did this with my remote and it works.
press stop twice(which is also the band button)
press down 1 time(button below the play/enter)
press play/enter 1 time
(you should see the menu now)
brake override should say no
I was told to change macrovision to no
hit system setup twice to save and exit
hope it works like mine did