Question about Bugaboo Frog Stroller

1 Answer

We need to find out how to clip a buggy board to the bugaboo frog. We have both clips and board but can't get them to clip on together. thanks

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Governor:

    An expert whose answer got voted for 20 times.

    Corporal:

    An expert that has over 10 points.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 13 Answers

Leave the (bassinet or seat) on the flip the stroller forward the big wheels have to be in the air. put on the clips make sure
you put the right on the right and the left on the left push them until they cover the silver screws. then put the wheel board on
huging the bar if not it will not go in start from the very bottom. And once its on don't forget to put the elastic with the velcro on.
the velcro goes on the bar right above the wheelboard. this will help you keep it up when your not using it.
Hope this helped.
Nathalie
bugabooexperts@yahoo.com

Posted on Dec 07, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The bugaboo frog harness - the end of the sholder straps don't click into the centre harness piece. There are clips at the end of the harness but they don't fit the shape of the centre clip...


There should be plastic rings on both the lap belts for the shoulder harness to clip too. If they are broken off you can buy the same plastic buckles from Mountain Buggy but you have to sew them on! Bugaboo don't sell them as a part, only with the whole seat frame! Here's a pic of a Bee harness (I have not got a Frog pic) it's the same style. macnutz_37.jpg

Oct 10, 2011 | Bugaboo Frog Stroller

1 Answer

I require new plastic clips on straps or just whole new straps.. Also the wooden base board on bassinet has cracked, are these available to be replaced? do you have frog hoods in different colours?


For a secondhand seat base you could try Buggypitstop in the UK or Karlisle's in Australia a google will find them. You could just laminate a bit of thin plywood to your base. Mountain Buggy use the same clips and do sell them as parts shop.mountainbuggy.com/parts/pre-2010/swift/complete-harness this does require a local seamstress to fit as you have to unpick the webbing and then re-sew it. The clips are actually made by YKK a huge international zip manufacturer, do a google there may be a local agent,

Aug 15, 2011 | Bugaboo Frog - Black Stroller

1 Answer

The top straps that are removeable from the back needs to be replaced. This is for the frog but bugaboo says they have nothing for another week and that is a safety issue for me with a 19 month old. ...


Mountain Buggy use the same clips and do sell them as parts shop.mountainbuggy.com/parts/pre-2010/swift/complete-harness this does require a local seamstress to fit as you have to unpick the webbing and then re-sew it. The clips are actually made by YKK a huge international zip manufacturer, do a google there may be a local agent,

Jul 15, 2011 | Bugaboo Frog - Black Stroller

1 Answer

I need replacement shoulder straps for my bugaboo frog. How can I get my hands on some??


You could try Buggypitstop in the UK or Karlisle's in Australia a google will find them. Mountain Buggy use the same clips and do sell them as parts shop.mountainbuggy.com/parts/pre-2010/swift/complete-harness this does require a local seamstress to fit as you have to unpick the webbing and then re-sew it. The clips are actually made by YKK a huge international zip manufacturer, do a google there may be a local agent,

Jul 15, 2011 | Bugaboo Frog - Black Stroller

1 Answer

Where can we buy a replacement hareness for a Bugaboo frog red stroller


You don't need the whole harness just one of those plastic clips that always breaks. Bugaboo don't sell them as a part but Mountain Buggy do ( they use the same clips). Check out your local mountain buggy agent.

Dec 21, 2010 | Bugaboo Frog - Black Stroller

1 Answer

Need replacement clips for bugaboo frog.


contact bugaboo through their website - they'v been very helpful to me

Sep 07, 2009 | Bugaboo Frog Stroller

1 Answer

How do you fit a bugaboo buggy board to a bugaboo frog?


Leave the (bassinet or seat) on then flip the stroller forward the big wheels have to be in the air. put on the clips make sure
you put the right on the right and the left on the left push them until they cover the silver screws. then put the wheel board on
huging the bar if not it will not go in, start from the very bottom. And once its on don't forget to put the elastic with the velcro on.
the velcro goes on the bar right above the wheelboard. this will help you keep it up when your not using it.
Hope this helped.
Nathalie
bugabooexperts@yahoo.com

Oct 19, 2008 | Bugaboo Frog Stroller

1 Answer

Broken harness on bugaboo frog


CONTACT BUGABOO

PHONE: 1-800-460-2922
E MAIL: service@us.bugaboo.com
WEB SITE: WWW.BUGABOO.COM

Jul 16, 2007 | Bugaboo Frog - Aubergine Stroller

Not finding what you are looking for?
Bugaboo Frog Stroller Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Bugaboo Baby Strollers Experts

Stephen Faulkner
Stephen Faulkner

Level 2 Expert

541 Answers

Jennifer Rock
Jennifer Rock

Level 2 Expert

105 Answers

J.D. Browning
J.D. Browning

Level 3 Expert

2608 Answers

Are you a Bugaboo Baby Stroller Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...