Question about Philips PM435S Remote Control
I have a philips universal remote but i don't have the code sheet,my tv is a panosonic w/vcr built in. I have tried EVERYTHING to program this remote! Please HELP!!!! How do i program this remote with out the codes!!! HELP!!!!!!!!!!!!!!!!!!!!!!
1) Manually turn on the device to be controlled.
2) Press and hold CODE SEARCH button until the red indicator stays on, then release the CODE SEARCH button.
3) Press and quickly release the desired mode button (TV, VCR etc.) . The red indicator blinks off once.
4) Press the CHANNEL UP button repeatedly ( up to 300 times) until the device to be controlled changes channel. The red indicator blinks off with each button press. If you accidentally overshoot the code required, press the CHANNEL DOWN button to backtrack through the library until the device changes channel. Pressing CHANNEL UP changes direction forward again.
5)Press and release MUTE to install the code.
Hope it helps~
Posted on Oct 27, 2008
Tips for a great answer:
Dec 21, 2015 | Philips Remote Controls
Oct 29, 2009 | RCA Universal Remote Control
Sep 03, 2008 | RCA Universal Remote Control
Jun 21, 2008 | Philips Magnavox Learning Universal Remote
Apr 20, 2008 | Philips Magnavox Learning Universal Remote
Apr 16, 2008 | Philips Magnavox Learning Universal Remote
Oct 11, 2007 | Philips PM3S Remote Control
Aug 22, 2007 | Philips PM3S Remote Control
95 people viewed this question
Usually answered in minutes!