Question about Hobart Dishwashers

Open Question

Hobart UX60B Dish washer washer

Manual

Posted by Anonymous on

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 112 Answers

SOURCE: Dish washer over filling?

The first thing you should do is clean the level probes in the unit. There are two probes sticking through the back of the unit and the water completes a circuit between these two telling the machine when it is full. If they are clean, you may have a faulty sensor or wiring.

Posted on Oct 18, 2008

  • 110 Answers

SOURCE: HOBART AM15 DISH WASHER ERROR(E1)

are you sure you dont have a bad display, there are no e1 err. for the am15,e2,fill prob.e6sensor,ed,slow leak,ee, bstr not to temp.ef, iternal control err. if it displayed p1 that is an open or shorted wash thermister

Posted on Jan 12, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why timer motor goes wrong direction on Hobart LT1 dishwasher.


Who wired that machine? Sounds like it was wired wrong. Contact an electrician.

Mar 15, 2016 | Hobart LT1-1 Dishwasher

1 Answer

I have a am-14 hobart washer. having problem with rinse temp indicator. it is fine for the wash then the temp gauge is jumping around, could it be the thermostat?


Your rinse temperature sensor that is a tiny probe in the water piping (top rear of machine) needs replaced. Hobart part # 00-294692. It costs about $84.

Oct 19, 2012 | Hobart Dishwasher Am-14 Commercial Dish...

1 Answer

Wash Temp will not get above 140


It depends on the design & the programming. By chance if the thermostat is faulty this can happen. However refer user manual and consult the service provider or the manufacturer!

May 21, 2010 | Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

I need a wire diagram for a hobart C44A


The lid to control box has diagram inside, the heat kw is in the metal ID plate on right end of top of control box

Oct 24, 2009 | Hobart Dishwashers

2 Answers

HOBART AM15 DISH WASHER ERROR(E1)


After checking the service manual, I find no code for E1. There is a P1, or other E codes. Please list ML number.

Jun 14, 2009 | Hobart 29 in. AM15-1 Free-Standing...

1 Answer

Wrench and code p3 display


this is a probe booster error your probe failed replace it

Dec 09, 2008 | Hobart 24 in. LXIH-3 Built-in Dishwasher

2 Answers

Winterizing a LXIH Hobart dish washer


Joe - The main issue is that the builtin booster heater is full of water - it has to be drained - there may be a small drain plug (square-shaped head), if not, you may have to pull loose the heater element to drain the tank. I would pour antifreeze solution in there and also in the wash tank. Unhook the water inlet - you say the machine is hard-plumbed in but mfgr recommends using brauided water hose to connect to water supply. hopefully this helps - I service commercial machines and came across your question and maybe you can ansqwer one of mine - how do I cancel the "delime" indicator? I can't find operators manual. jimmy.

Nov 26, 2008 | Hobart 24 in. LXIH-3 Built-in Dishwasher

1 Answer

All the wires been trip by some one so i need to wire it up


Can you confirm if you have an AM14 or AM15. Check the data plate and give the Voltage spec., ML number, if you have it.' Please confirm what you mean by the wires are trip.

Nov 12, 2008 | Hobart 42 in. AM14C-154 Free-standing...

Not finding what you are looking for?
Dishwashers Logo

Related Topics:

70 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hobart Dishwashers Experts

Jason

Level 2 Expert

211 Answers

yadayada
yadayada

Level 3 Expert

75807 Answers

handygirl911
handygirl911

Level 2 Expert

59 Answers

Are you a Hobart Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...