Question about Dryers
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Your dryer needs a new motor. It should cost about $200-250 including labor. Call a local repairman - not a national company. Give him the model number and ask him to bring the motor with him.
Posted on Mar 31, 2008
Email me a response to firstname.lastname@example.org and I will be more than happy to provide you with parts breakdown illustrations and possible part numbers and locations to replace. The service amount verses the do-it yourself amount will be well worth the savings. Typical labor cost on appliances are 75.00 per hour and a mark up on the parts. If you feel you can do it yourself after getting the photos e-mailed to you, it will save you approx 200.00 if not a lil less or a lil more.
Please rate this solution "fix-ya" if it seems to satisfy your question.
Posted on Apr 14, 2008
Unplug first with a straight blade screwdriver, pry up on the top of the dryer where the front wall of the dryer and the top meet. there are 2 screws 1 on each side inside the dryer where the sides and front meet, remove them and unhook the wires from the door switch. the whole front will now pull out and up, now open the door remove the 2 screws at the bottom of the door opening and the whole lint tray will pull out. sounds like a lot but only takes about 5 minutes.
Posted on Dec 04, 2008
The font panel must be removed. This may be done by removing the control console (open upper cabinet doors to find screws behind the console). The screws along the top of the lower front panel are easily accessible. Disconnect the two interlock switches, remove the grounding clip attached to the bulkhead & lift the panel off the two lower clips. Inside the panel is a housing that leads to the exhaust blower. It will be packed with lint that may be hardened like papier mache. Just clean out the mess & reverse the process to replace the parts.
Posted on Feb 11, 2009
Tips for a great answer:
Nov 15, 2016 | Maytag Dryers
Dec 21, 2013 | Maytag Neptune MDE5500AY Electric Dryer
Jan 01, 2013 | Maytag MDE9700AYW Neptune 174 Electric...
Oct 08, 2010 | Maytag Dryers
May 11, 2009 | Maytag Neptune MDE4000 Electric Dryer
Apr 14, 2008 | Maytag Neptune MDE5500AY Electric Dryer
Mar 31, 2008 | Maytag Neptune MDE5500AY Electric Dryer
Oct 07, 2007 | Maytag Neptune MDE5500AY Electric Dryer
Nov 22, 2017 | Dryers
Nov 22, 2017 | Dryers
73 people viewed this question
Usually answered in minutes!