Question about Singer Sewing Machines
Posted by Anonymous on
a 6ya Repairman can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Repairman (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
SOURCE: raising bobbin thread
These machines are timed by belt and go out of time a lot. Check and see that when the needle passes through the plate and travels upward 1/8" at this point the rotating hook should be right behind and above the eye in the needle,my guess is that it is out probably 1 tooth on the timing belt and can usually be corrected by removing the bobbin case and holding the rotating hookk with on ehand and forcing the handwheel with the other hand which will cause the belt to jump a cog and should put your machine back in time I hope this helps
Posted on Jan 10, 2009
Drop-in bobbin: Note: thread must change direction when entering bobbin shuttle notch. Usually bobbin will turn counter-clockwise when threaded properly.
1. hold bobbin so that the tail of thread is facing to left.
2. drop bobbin into bobbin shuttle.
3. pull thread toward you.
4. guide thread into notch and pull to left so that slot engages thread.
5. pull thread diagonally across shuttle toward back of machine.
6. draw bobbin thread up through needle plate with threaded needle.
Posted on Oct 31, 2009
Posted on Jan 23, 2010
Tips for a great answer:
Dec 12, 2017 | Singer Sewing Machines
Jul 17, 2017 | Singer Sewing Machines
Jul 14, 2017 | Singer Sewing Machines
Oct 27, 2016 | Singer Sewing Machines
May 25, 2016 | Singer Sewing Machines
Mar 12, 2010 | Singer 5050 Mechanical Sewing Machine
Feb 15, 2010 | Singer 5050 Mechanical Sewing Machine
Nov 11, 2008 | Singer Quantum XL-6000 Computerized Sewing...
474 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: