Question about HP Pavilion zd8000 Notebook

1 Answer

My Mointor Is Blank

I do turn on my computer my mointor stay blank

Posted by on

  • Anonymous Nov 16, 2008

    Yeah, Same problem. Video is blank. VGA Mode it works, but any other mode including just changing colors from 8-bit to 16-bit. screen blanks out.

    I hear it is a common problem on this model.

×

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 89 Answers

HP will not admit it but there is a consistent problem with their zd8000 model. The video card (unfortunately part of the system board) needs to be replaced. We have seen a good number of these computers coming in with the same problem. Try starting your system in VGA mode. You can do this by hitting F8 at start up. If you now have a video screen then you know their is a problem with your video card or video card driver.

Posted on Oct 28, 2008

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Mointor dell flat screen


flashing amber normally just means it has gone into standby because it's not getting a valid signal, when you bought the other monitor did you use a different vga/dvi cable when you plugged it in? are both inputs the same? for more information on the padlock please read this page http://www.paulstravelpictures.com/Dell-LCD-Monitor-Flashing-Padlock-Icon/index.htm

Apr 29, 2012 | Computers & Internet

1 Answer

DRIVE OUTPUT NOT COIMING & LCD mointor


hw to select a drive depending on current rating

Mar 13, 2010 | Lenze AC Tech Lenze 8100 AC Drive Inverter

1 Answer

My monitor flickered a few times and went blank the mointor is getting power but no video input


u just try to open ur monitor and try to resolder everything in the mainboard. but plz do it carefully it might get short circuited esp. if u deal with the ic pins.

Feb 28, 2010 | Acer Computers & Internet

2 Answers

Dell flat panel monitor -power button blinks green to amber - no


One reason that this is happening could be that it is on Power saving mode. This happens when the LCD monitor detecs an incorrect timing then thats the time that the LCD goes blank and the power botton starts to blink.

what you need to do is to turn the computer off. Unplug cables attach to the LCD make sure it is also off, once done press the power botton for a couple of 30secs to a minute and then release. After doing so re-connect all the cables and make sure that both ends is tight and secure once everything is ok turn the computer on same with the monitor to check if it solves the problem.

Jan 10, 2009 | Dell Dimension 2400 PC Desktop

1 Answer

Out Of Range


It means the LCD does not like the resolution or refresh signals from your video card. Try a resolution like 1024 x 768 at 60 or 72 Hz refresh.
Monitor Mike

Jan 03, 2009 | Star Logic 17" LCD Monitor

1 Answer

My mointor


Probably the LCD panel itself has gone bad. The tab board in usally the problem. The welds between the glass and board go bad.

May 27, 2008 | Dell UltraSharp 1907FP 19" LCD Monitor

1 Answer

Samsung 931B SyncmMaster


DO YOU MEAN WONT SWITCH FROM ANALOG TO DIGITAL!!!

THE ONLY WAY THIS WILL CHANGE IS IF YOU HAVE A DIGITAL INPUT SOURCE CONNECTED to this mointor like HDMI AS THIS MOINTOR AUTOMATICALLY SENSES ANALOG SIGNALS AND DIGITAL INPUT SIGNALS if a digital signal is available it will switch over if a digital input singal is not available you will only be able to use the analog option

Jan 11, 2008 | Samsung SyncMaster 930B 19" LCD Flat Panel...

1 Answer

Moniter won't turn on


SOUNDS LIKE POWER SUPPLY IS OUT OR POWER RELAY IS Bad.

Probably cheaper to replace this mointor with a new lcd which uses 50% less current.

even if you find the parts to fix it i suggest replacing this moinitor altogether electrical failure is a sure sign of other problems in the future.

Oct 23, 2007 | Acer AC711B 17" CRT Monitor

Not finding what you are looking for?
HP Pavilion zd8000 Notebook Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top HP Computers & Internet Experts

Les Dickinson
Les Dickinson

Level 3 Expert

18409 Answers

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Are you a HP Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...