Question about Venturer PVS1971S Car DVD Player

Open Question

Venturer dvd portable dvd pvs-7100sd

Hi i may be silly but i have just got my dvd player out to use and i can not find wherethe battery is ment to clip onto have a lost something it just doesnt seem to attach and i cant remember how to even charge it with out the car adapter please help

Posted by on

5 Suggested Answers

Noggin
  • 944 Answers

SOURCE: venturer pvs 1262

Duplicate post - please see the other one :)

Posted on Mar 22, 2007


SOURCE: portable dvd (incar)

Visit http://1800customersuppoer.com/venturer this is their official customer service website. Or call them at 1-800-252-6123. They should be able to sell you one no problem.

Posted on Aug 20, 2007

  • 1 Answer

SOURCE: Unlock region code

I found this info on the site and it works!!!!

1. Switch on the DVD player.
2. Open the disc tray, and leave it open.
3. On your remote key in the following number: 81328
4. Then press the ENTER key a number of times till region 9 comes up.
5. Press the MENU button on your remote.
6. Finally close the tray.

Posted on Mar 30, 2008

  • 1 Answer

SOURCE: Venturer PVS133 Portable DVD Player

Venturer 8" Portable DVD Player
I ran my battery down and the charger won't charge.
The charging light doesn't come on.

Posted on Apr 29, 2008

  • 303 Answers

SOURCE: Car power adapter for Venturer PVS1951 Car DVD

You can buy a new car adapter by clicking on the hyperlink:
buy replacement car adapter power charger cord for VENTURER PVS1951

Posted on Jun 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Manual recording procedure


I am assuming that is what they ment.

Because a DVD Player would not be able to Recored anything at all. And he did not mention anything about there being a VCR in it or anything about a VCR in Fact.

You would have to Have a DVD Recorder to Record anything onto DVD's

Aug 24, 2012 | Panasonic DMR-E85H DVD Recorder

1 Answer

My DVD player won't play the DVD. It tells me to check the regional code. What is a regional code?


a regional code is something embedded in a dvd so it can only be in the region of the world where the dvd was ment to be sold. In North America the letters NTSC are seen on all DVD's and games. In europe it says PAL. Look for the letters on the dvd.

Oct 17, 2010 | Samsung DVD-V5600U DVD Player/VCR

1 Answer

DVD player isn't working in TruFlat TV


YOU NEED TO CLEAN LASER OR REPLACE IT

Aug 26, 2009 | Televison & Video

1 Answer

Difficulty playing DVD movie clips


Hi, it depends on the type of movie clips you have on the disk. its possible they maybe avi files. To play on most dvd players you would need to convert them to mpeg 2 which is the format for dvd movies,you can google for software, or if you need more help go to videohelp.com. Normski

Apr 16, 2009 | Intervideo WinDVD 4.0 for PC

3 Answers

Lost key code for installing power dvd onto my pc


try this key code it should work
bx36m15491914915 i had the same problem it worked for me

Jan 15, 2009 | CyberLink Power DVD 5.0 (cd-powerdvd5) for...

1 Answer

I have a Canon A540 digital camera . we can copy video clips to DVD and this can be played onto my notebook BUT we cannot play these clips through the DVD recorder onto the TV. Can you please...


Hi, DVD players can only play DVD Standard format and some standard codec (divx,...), so if you want to play your clip in a DVD player you must convert them to the standard format... an easy way is useing nero express:  nero express > video > DVD, then add yor clips, make a nice menu and then burn it on DVD. Also you can use Nero vision for better menus or Ulead DVD movie factory for even better Menu if you can spend money. ;) I hope this helps.

Nov 02, 2008 | Canon Cameras

1 Answer

I'm trying to put my existing DVDs on the Sansa e250


If the movie file you are trying to convert is too long, then the converter will get stuck - this player is not big enough to really handle full length DVD movies. It's more for shorts from YouTube, etc. If it is a half hour show, or something like that, you may have a copyright protection issue that is blocking you. i'm not endorsing any illegal activity, but here is a comment from an owner of your player (hint hint):
"
It Worked!!! I loaded the DVD Decrypter & Chopper. I was able to convert the show into clips and the clips have been loaded onto the Sansa. The entire show is about 47 minutes; it converted into a bunch of files. I was able to find the four .VOB files that "formed" the show. Is there a way of linking all the clips together? The way it is on the Sansa now is as 4 individual clips. Each clip seems to end and begin in the middle of dialogue and not at "traditional" DVD chapter points. If there is no way of bridging the clips together, that is fine. I am just glad I was able to get the show loaded onto the player at all. Thanks again, I really appreciate your patience."

-Tha Mp3 Doctor

Jun 20, 2008 | SanDisk Sansa e250 MP3 Player

1 Answer

DVD player remote is dead


It's quite possible that something got spilled into the remote. I've had this happen a bunch of times, & the remote goes dead! What I did was to take the remote apart by first separating the two halves with a knife & a lot of patience. The two halves are connected together by little clips of plastic all around the perimeter of the remote. Once you start to pry at it, you'll see little indentations ~1/8" - 1/4" wide, every here & there...these are the clip locations. Try to separate them without breaking them. Once you have the remote apart, there's four parts to it; the two halves that you just fought with, the circuit board, (PCB), & the rubber matt that contains the buttons. What you'll need to do is to clean the PCB thuroughly with rubbing alchohol, making sure to dry it completely. Do the same to the other parts, being carfull not to break anything but at the same time being sure to get them clean! Check that there aren't any broken wires or components, resolder anything that may need it. Once you're sure that everything is connected, clean & dry, reassemble the unit by first placing the rubber matt over the PCB, (line up the buttons & make sure it's in the right orientation. Then press the front cover onto the PCB/matt while holding the whole thing aligned, then put on the back cover & click it all together with the little clips. Be extra carefull that the battery connectors go into their proper slots. You may also want to bend the battery connectors alittle bit, in such a way as to make sure that the battery makes a good contact, don't go crazy, you don't want to break them! Once you have it all back together, put in some fresh batteries & try it out! If it still doesn't work....go buy a universal remote!!! Don't worry....be happy!! Good luck!!!
Don

Jun 01, 2007 | GE DGE100N DVD Player

1 Answer

Panasonic VCR/DVD Player


You need to convert the .avi files to the MPEG format with software. Just renaming the file will not work.

May 29, 2007 | Panasonic PV-D734S DVD Player/VCR

Not finding what you are looking for?
Venturer PVS1971S Car DVD Player Logo

Related Topics:

113 people viewed this question

Ask a Question

Usually answered in minutes!

Top Venturer Car Audio & Video Experts

xxxxxx xxx

Level 3 Expert

4807 Answers

yadayada
yadayada

Level 3 Expert

70387 Answers

The Knight
The Knight

Level 3 Expert

72670 Answers

Are you a Venturer Car Audio and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...