Question about VistaQuest Vq1024 Digital Camera

1 Answer

I cannot get my camera to do anything when I turn it on

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Contributor
  • 21 Answers

Maybe your camera is on hang condition,.sometimes because on lens trouble or lens error, Lens errors (system errors) are fairly common. Usually it's sand or grit interfering with the lens extension mechanism. Or the camera's been dropped with the lens extended. Or the camera has been powered on, but the lens had been blocked preventing its extension. Or the battery ran down with the lens extended ...Here are some troubleshooting steps that you can try that may (or may not) correct it. They only seem to work for less than 40% of the lens errors, but if the camera is out of warranty (or repair cost approaches that of the camera), they're worth that try. Some of the later steps do involve some risk to the camera, so carefully weigh your options before deciding to conduct them: so good luckand wish you luck..

Posted on Feb 23, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My camera is frozen and won't turn off. Can't video or anything.


Take the batteries out; this should shut it off. It should restart normally after the batteries are put back in.

Jun 08, 2012 | Kodak Playsport Zx5 Video Camera aqua

1 Answer

Camera doesn't want to turn on


were can i find my sestart button on my canon powershot a560

Apr 29, 2010 | Kodak EasyShare One Digital Camera

1 Answer

Camera got wet and now it won't turn on


Water and electronics just don't mix, and your problem could be anything from a blown 15-cent diode to a fried main board that would make the camera nothing more than a small paperweight. Suggest that you take the camera to a local Canon dealer (NOT the camera department at a chain store) and also contact Customer Service via the Canon web site. Be sure to get a firm price, not just an estimate, before you commit to anything. The fix could approach or even exceed the cost of a new camera, and repairs typically only carry a 30-day warranty.

Bill B

Apr 01, 2010 | Canon PowerShot SD960 IS Digital Camera

1 Answer

Can turn camera on but will not do anything else will not turn off again


try charging the battery, or replacing it...it might just be that the battery doesnt hAve enough strenghth to do anything else, this solution works, i have tried it.

Feb 21, 2010 | Vtech Kidizoom Digital Camera

1 Answer

Turn the camera off and on - can't do anything!


I have the same problem. I contacted Panasonic and they will attempt a repair. I really have no other alternative than junking the camera.

Aug 03, 2009 | Panasonic Lumix DMC-FX100 Digital Camera

1 Answer

Lens only open partially


Lens mechanism isn't good to work properly so camera shut down the power. Try to tap the lens/ camera while power up.
If you have a memory card in the camera, take it out before turning the camera on

Jun 24, 2008 | Sony Cyber-shot DSC-S600 Digital Camera

1 Answer

Camera wont turn on


Here are some simple things to try first for a camera that won't power on. They won't work for every case, but they're worth a try:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html

May 27, 2008 | Canon PowerShot S45 Digital Camera

1 Answer

Camera is on but lens doesnt do anything and cannot see anything


It sound like a technical problem in your camera. You may chose to fix only if it will cost you lest than $100.00 if it is more, you may be better buying a new one.

Artgirl

Apr 29, 2008 | Nikon Coolpix 2100 Digital Camera

2 Answers

Pentax optio S50 Digital Camera problems.


does anything on the screen change when you press the display button? will the lens open? have you tried taking photos without the memory card in the camera?

Apr 12, 2008 | Pentax Optio S Digital Camera

1 Answer

Blank LCD on the camera


The camera turns on but the screen stays blank and I press any button and do not do anything no zoom no nothing and I press the menu button but neither nothing shows up just the blank screen

Jan 16, 2007 | HP Photosmart 620 Digital Camera

Not finding what you are looking for?
VistaQuest Vq1024 Digital Camera Logo

Related Topics:

59 people viewed this question

Ask a Question

Usually answered in minutes!

Top VistaQuest Cameras Experts

kakima

Level 3 Expert

102366 Answers

Tony

Level 3 Expert

2600 Answers

Piyal Perera
Piyal Perera

Level 3 Expert

528 Answers

Are you a VistaQuest Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...