Question about Mavic Cycling
Posted by Anonymous on
a 6ya Expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to an Expert (only for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Here's where having a good relationship with your local shop comes in REAL handy. Ask 'em if you can look at the instructions in one of their wintechs. If you're lucky, you might even be able to make a copy. Of course, your shop has to carry your model.
Posted on Jun 18, 2009
It sounds like you lost the washer that sits between the bearing in the nose and the freehub bearing. If you lose that washer, when you re-tighten the axle, the two bearings will bind and prevent the freewheel from spinning easily.
Take your freehub off again and see if that washer is there. If it isn't, you'll have to get a new one and replace it. It's easy to lose that thing if you don't know it's there when you take the wheel apart, because it'll just fall out.
When I reassemble those wheels. I thread the drive-side axle through the freehub body, then place the washer over the axle on the inside of the bearing, then thread the axle through the nose.
Also note that if your freehub seemed loose, it probably needs to be replaced. The FTS-L freehub body used on the Ksyrium wheels uses a nylon bushing as the friction interface to the nose, and this bushing wears down over time even with good lubrication.
Posted on Mar 17, 2010
Tips for a great answer:
Dec 07, 2017 | Schwinn Cycling
Mar 16, 2015 | Road Motorcycles
Oct 05, 2011 | Blackburn Neuro 5.0 Bike Computer
Jul 31, 2011 | Mavic Ksyrium Elite Wheelset
May 20, 2011 | Mavic Ksyrium Elite Wheelset
Sep 21, 2010 | Mavic Cycling
Oct 03, 2009 | Computers & Internet
Sep 08, 2009 | Mavic Cycling
May 08, 2009 | Mavic Ksyrium Elite Wheelset
Apr 08, 2009 | Mavic Crossmax ST Disc Mountain Bike...
48 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: