Question about Computers & Internet

1 Answer

What to do when the monitor screen say''enter password to unlock system?

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 9 Answers

If it is coming from Windows as it returns from hibernation or the screen saver has gone on with "require password" to access, enter your normal windows password. If it is coming from the password protection set-up in CMOS you need to clear the CMOS with the jumper on the motherboard (see motherboard or computer manual), or if there is no jumper on the motherboard to "Clear CMOS or sometimes BIOS) then carefully pull the motherboard battery (located in a socket on the top of the motherboard (usually a silver 3202 round battery about the size of a quarter) wait 5 minutes for the CMOS to clear, reinsert the battery and then boot normally. You should not see the login and it should go to Windows boot directly.

Posted on Feb 21, 2012

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

hunter19_46m
  • 7482 Answers

SOURCE: after switching on the laptop

Hi neilalwayz...

Start your computer in the Safe Mode.
To start in Safe Mode.
Turn your computer on.
Keep tapping F1 or F8 while the computer is starting up
When the computer starts select Safe Mode
1. Uninstall any softwear you may have put on the computer before the problem started.
2. Do a complete System Restore: Start>All Programs>Accessories>System Tools>System Restore.
This will bring your system back to a time before you installed the softwear or Microsoft installed drivers,etc.
Note: Just be sure to use a date in a darkened box, that is before your trouble start date.
When you have done the above, restart the computer and if your still having the problem, then the installed drivers,updates,softwear,etc might have
corrupted the Operating System.
If that happened then that means either repair or reinstall the operating system.
You will need to do the following:
1...Repairing the Operating System...
A...You will have to have the Operating Dics that came with the computer.
Note...If you do not have the disks that came with your computer or the ones you should have made when you first got your computer...then you will have to go to the manufacture's webpage and see if they have a recovery disk available for your computer, if they do not a recovery disks available then you can also try ebay to locate the recovery disks.
The original disks will have your product key number that came with the computer, you can also find it on the tower, or under the bottom of your laptop, or maybe the piece of paper that the CD orginally came in may have the number on it.
You can also download a small program and it will tell you your product key number.
Go to the following webpage to download your FREE key finder.
http://www.magicaljellybean.com/keyfinder/
B...You will now insert the disc into the CD/DVD player
C...Restart the computer
D...When the window opens that tells you to press "Any" key, you will press any key you want to press.
E...If you do not receive a message that says "press any key to boot from CD", then then the computer is not ready to boot from a cd.
To correct this problem you will have to go into your computer's Bios and change the computer to boot from a CD.
To get into the Bios, shut the computer off,restart, while the computer is starting up keep tapping F1 as the computer is starting up.
When you are in the Bios, select to boot by CD by moving the cursor with the direction arrows on the keyboard.
Once you have selected to boot by cd the exit and restart the computer...the disc is already in the cd/dvd player.
Your system will then boot from the cd.
F...After a minute or less it should ask you if you want to Quit Repair, or Continue.
You will select Repair this time, but you may have to come back here and select Install if the repair does not work.
It will ok the agreement document if it asks you too.
Tap F8 on your keyboard to pass it when ready.
It will ask you if you want to Install, Repair, Delete Partition, or Quit.
Select Repair
Inside the box there will be one or two partitions.
Choose the largest partition.
After you have chosen the largest partition, you will then press the "r" key to start the repair
After the repair is complete, then you will need to restart your computer.
G...Computer Restart
After the repair is complete, shut the computer down (the computer will shut down a few times during the installation of the operating system
that is normal).
Then restart your computer, when the computer restarts it will have a box to put your product key...put the product key in the box and click.
The computer should start up and run as if it was a new computer.
You do not need to re-register
You can now remove the disc.
-----------------------------------------------------------------------------------------------------------------------------------------------
If this fails to clear your problem then you may have a hardware problem.
It could be faulty ram
If you still have the same problem, then you have two choices.
1.Reinstall the entire Operating System and you may have to update some drivers.
This will require you to go back to the start of the repair info and select Install instead of Repair.
2..Take your machine in to have the hardware tested.
Keep in mind that if you do a complete reinstall of the Operating System you will lose all the information on the computer,such as pictures, programs, videos, everything you installed will be gone.
Please take time to rate me four thumbs up

Posted on Sep 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I can't remeber password to unlock screen om my samsung galaxy 15510


Dear Brother Please check it:

ur defalt phones codes is 12345 or 00000 u can use it
Default 4 Digit user code: 1234 or 0000
Default 6 Digit Security code: 123456 or 000000

Type *#06# at the mobile screen to know IMEI no of your mobile.
send the IMEI no to me and i will reply you with unlocking code.
IF Problem not Solved So
Please New Software install in the Phone Problem will Solved

If For puk & pin cod problem So Please
Very Best Solution:You Go To Service & Sim Office and Get The Puk code And Pin code From Office oprator
Enter The Puk code and Yes
Enter The pin code and Yes
So Puk code Open and Problem will Quickly Solved

Dec 11, 2012 | Cell Phones

Tip

6 Free Solutions is Behind You for Windows Password Recvoery


<span>When you forgot your Windows login password, what would you do? Take your computer to a PC repair shop or buy an expensive<span> </span><a href="http://www.passwordunlocker.com/windows-password-recovery.html">Windows password recovery</a><span> </span>tool? Well, sometimes it costs you no penny to get back or reset your lost Windows password actually. Don't believe it? Just have a try of the following free Windows password recovery solutions if you forgot Windows password to your computer.<br /> 1. Ophcrack LiveCDMany free Windows password recovery tool are supposed to help you get back in computer if one<span> </span><a href="http://www.passwordunlocker.com/knowledge/forgot-windows-password.html">forgot Windows password</a><span> </span>for your computer. In reality, some users resort to free Windows password recovery tool to unlock their PC, like Ophcrack. Ophcrack LiveCD is a completely self contained, bootable version of Ophcrack. Ophcrack LiveCD is the easiest and most effective Windows password recovery freeware that I've ever found to "crack" your forgotten Windows password.<br />Since you can't login your Windows PC because you lost the password, so first you'll need to visit Ophcrack's website to download ophcrack LiveCD. Please make sure that if you've forgotten Windows 7 password or Vista password, click on ophcrack Vista LiveCD. If you've forgotten XP password, click on ophcrack XP LiveCD.<br /> 2. Cain & AbelUnlike Ophcrack and other popular Windows password recovery programs,<b><span> </span>Cain & Abel</b><span> </span>requires access to Windows under an administrator account. In fact, Cain & Abel is a bit more complicated to use than other password recovery tools which is usually unavailable for Windows Vista as is said.<br />If you have no way of getting in to your Windows PC, you will not be able to use Cain & Abel to recover your password. Moreover, before you can use Cain & Abel, you'll need to download a rainbow table. These large databases of passwords are required so Cain & Abel can reset the forgotten windows password.<br /> 3. Available Admin AccountIt's well known that Windows administrator users have rights to change password of other user account on the same computer. So if you forgot password of the user account, just enter your administrator account and do as follows:<br /> <ul> <li>1. Press F8 to enter the<span> </span><b>Advanced Boot Options</b><span> </span>when booting your PC.</li> <li>2. Select<span> </span><b>Safe Mode</b><span> </span>and enter your computer with an Administrator password.</li> <li>3. In Safe Mode, click<span> </span><b>Start</b>-&gt;<span> </span><b>Run</b>-&gt; Type<span> </span><b>control userpasswords2</b>-&gt;click<span> </span><b>OK</b>.</li> <li>4. On the coming up Users screen, click the name of the user account that you want to reset the password for, and then click<span> </span><b>Reset Password</b><span> </span>to process.</li></ul> 4. Windows Password Reset DiskIt is considered the easiest way to reset Windows password when you are forbiddened to access your laptop with protected password. However, many of us haven't enough consciousness on creating a Windows password reset disk before they lost the password.<br /> <ul> <li>1. Type a wrong password on the Windows logon screen.</li> <li>2. Click<span> </span><b>OK</b><span> </span>when Windows displays a message that the password is incorrect and "Reset password" link will appear.</li> <li>3. Click<span> </span><b>Reset password</b><span> </span>to pop up Password Reset Wizard screen, and then click<span> </span><b>Next</b>.</li> <li>4. Follow the steps in the Password Reset Wizard to create a new password.</li></ul><b>Note:</b>This solution takes effect provided you have created a Windows password reset disk for your Windows account in advance.<br /> 5. Typing Ctrl + Alt + Del (Only Under Windows XP)This option is only for Windows XP. Furthermore, the default administrator account on Windows XP is enabled and not password protected by default, which is disabled by default on Windows 7 and Vista.<br /> <ul> <li>1. Turn on your Windows XP machine and go to its logon screen.</li> <li>2. Press<span> </span><b>Ctrl+ Alt +Del</b><span> </span>twice to pop up the classic logon box.</li> <li>3. Enter<span> </span><b>Administrator</b><span> </span>in the User name box and then click<span> </span><b>OK</b><span> </span>to log on your Windows XP machine.</li> <li>4. Click<span> </span><b>Start</b><span> </span>button to pop up the Run box, and then type<span> </span><b>control userpasswords2</b><span> </span>and click<span> </span><b>OK</b>.</li> <li>5. On the coming screen, click the name of the user account that you want to reset the password for, and then click<span> </span><b>Reset Password<span> </span></b>for password recovery.</li></ul> 6. System Recovery OptionYou can use system recovery options to reset lost Windows password by using Windows installation disc or access to the recovery options provided by your computer manufacturer. Also you can create a system repair disc as below:<br /> <ul> <li>1. Click the Start -&gt; Control Panel -&gt; System and Security -&gt; Backup and Restore.</li> <li>2. Click<span> </span><b>Create a system repair disc</b><span> </span>on the left pane.</li> <li>3. Insert a blank CD/ DVD into your CD/DVD drive and click on the Create disc button. It will start creating the System Repair Disc.</li> <li>4. When it's finished, click the<span> </span><b>Close</b><span> </span>button, and then click<span> </span><b>OK</b><span> </span>to finish.</li></ul>Of course, if you cannot resolve your problem with these free Windows password recovery tools, you can create a password reset disk with<span> </span><a href="http://www.passwordunlocker.com//windows-password-recovery.html"><b>Windows Password Unlocker</b></a>, which allows to burn a password reset CD/DVD or USB flash drive to bypass lost password on Windows 7/Vista/XP/2000/2003/2008 in a short time.<br /></span>

on May 04, 2011 | Computers & Internet

1 Answer

I have forgotten the password of my alcatel lucent ip touch phone, how can i unlock it again


HERE'S THE ANSWER TO YOUR PROBLEM:

1. Enter the last four digits of your phone number on your cell phone PIN screen.

2. Enter 9999, and if that doesn't work try 1111, and if that doesn't work try other four-digit numbers you may have entered.

3. Shut off your cell phone, take off the back of your phone and pull out the battery. Record the IMEI number which is under the battery. Re-insert the battery and power on the phone. Enter the last four digits of the IMEI number on the PIN entry screen.

4. Call your service provider and request the unlock PIN if none of your attempts so far have worked. You will have to prove you are a customer by stating your cell phone number, address and Social Security number.

5. Turn off your phone. Hold the keys "3," "*" and "Call" and switch the phone on. Hold the three buttons down until the word "Formatting..." appears on the screen. This should reset the phone lock code.

6. Go the links in the Resources section and have your IMEI number ready. These websites will ask for your phone model and IMEI number and then charge you a set fee for the unlock code.
Read more: How to Unlock a Cell Phone Password ' eHow.com http://www.ehow.com/how_4810931_unlock-cell-phone-password.html#ixzz1Qc2uBsBY

Jun 28, 2011 | Lands Phones

3 Answers

I am locked out of my blackberry 9500 i have forgot my screen pattern and i need to reset it please help!


Enter any password until you fail 10 times, it will make your blackberry storm 9500 unlocked from old password and erase your previous data. There is no option to unlock blackberry password without loosing the data, that's feature of RIM security system. So good luck!

May 29, 2011 | RIM Research In Motion Blackberry Storm...

2 Answers

I forgot got the unlock password and i clicked on 'forgot password', it told me to type in my email and password, it told me they were incorrect. how do i get into my phone?


Hi,

Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm using ATT as an example.

Phones are naturally unlocked, but a service provider might lock them

When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.

Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.

Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.

Your phone has to be unlocked by the carrier. LG, Motorola, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:

● logging in to your my wireless Account online
● using their Technical Support Chat
● calling Customer Care at 1-800-331-0500

To get your phone's PUK code online from ATT:

● Log in to your my wireless Account.
● Select My Services under My Account.
● From the My Services screen, select My Phone/Device.
● Select Unblock SIM Card.
● The Unblock SIM screen will display your PUK code.


Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."

There are three other ways to unlock a phone:

● The carrier will unlock the phone for you at one of its retail outlets;
● You can do it yourself by clicking on this link Free Unlock Codes ,
● Pay $3.89 at the following website: www.theunlockshack.com/.

I trust that this is helpful and solves your problem. All the best

Ben

May 25, 2011 | Cell Phones

1 Answer

I bought the voyager from a friend and do not have the code. he did not remember it. how do I go about resetting the password so I am able to use it?


Hi,

Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm useing ATT as an example.

Phones are naturally unlocked, but a service provider might lock them

When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.

Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.

Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.

Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:

● logging in to your myWireless Account online
● using their Technical Support Chat
● calling Customer Care at 1-800-331-0500

To get your phone's PUK code online from ATT:

● Log in to your myWireless Account.
● Select My Services under My Account.
● From the My Services screen, select My Phone/Device.
● Select Unblock SIM Card.
● The Unblock SIM screen will display your PUK code.


Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."

There are three other ways to unlock a phone:

● The carrier will unlock the phone for you at one of its retail outlets;
● You can do it yourself by clicking on this link Free Unlock Codes ,
● Pay $3.89 at the following website: www.theunlockshack.com/.

I trust that this is helpful and solves your problem. All the best

Ben

May 24, 2011 | LG VOYAGER VX10000 Cellular Phone

1 Answer

How do I do factory reset of my motorola i9 phone


Hi,

It sounds as though you don't have a password. If you don't the phone must be unlocked.

Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I'm useing ATT as an example.

Phones are naturally unlocked, but a service provider might lock them

When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.

Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.

Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.

Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:

● logging in to your myWireless Account online
● using their Technical Support Chat
● calling Customer Care at 1-800-331-0500

To get your phone's PUK code online from ATT:

● Log in to your myWireless Account.
● Select My Services under My Account.
● From the My Services screen, select My Phone/Device.
● Select Unblock SIM Card.
● The Unblock SIM screen will display your PUK code.


Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."

There are three other ways to unlock a phone:

● The carrier will unlock the phone for you at one of its retail outlets;
● You can do it yourself by clicking on this link Free Unlock Codes ,
● Pay $3.89 at the following website: www.theunlockshack.com/.

I trust that this is helpful and solves your problem. All the best

May 23, 2011 | Cell Phones

1 Answer

The phone is asking for puk number


Hi,

Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I've used ATT as an example.

Phones are naturally unlocked, but a service provider might lock them

When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.

Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.

Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.

Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.

A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:

● logging in to your myWireless Account online
● using their Technical Support Chat
● calling Customer Care at 1-800-331-0500

To get your phone's PUK code online from ATT:

● Log in to your myWireless Account.
● Select My Services under My Account.
● From the My Services screen, select My Phone/Device.
● Select Unblock SIM Card.
● The Unblock SIM screen will display your PUK code.


Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code.

Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator."

There are three other ways to unlock a phone:

● The carrier will unlock the phone for you at one of its retail outlets;
● You can do it yourself by clicking on this link Free Unlock Codes ,
● Pay $3.89 at the following website: www.theunlockshack.com/.

I trust that this is helpful and solves your problem. All the best

May 22, 2011 | Computers & Internet

1 Answer

I have an mms and password how do i retreive it


Hi,
Let me give you a little background and then some solutions. This is generic because I don't know your carrier. I've used ATT as an example.
Phones are naturally unlocked, but a service provider might lock them
When originally manufactured, all GSM cell phones are unlocked. That is, they can be used with any SIM from any cellphone service provider - always assuming, of course, that the cellphone service provider has compatible GSM service on the same frequency bands that the phone can operate on.
Most cell phone service providers electronically 'lock' the phone so that it can only be used with their service. There are obvious reasons why they choose to do this - in particular, to force you to pay what are usually very high roaming charges when you take your phone out of their network and use it elsewhere in the world.
Fortunately, this locking is reversible. With some phones, it is possible to simply enter an unlocking password code into the phone and it is immediately then unlocked. Other phones need to be connected up to a special unlocking data terminal.
Your phone has to be unlocked by the carrier. LG, Motorala, Sony Ericsson, Nokia and most of their ilk, will not give consumers the unlock codes but don't despair.
A PUK (PIN Unlock Key) code is required to unlock SIM cards that have become locked following three successive incorrect PIN entries. If your SIM card becomes locked, you will need to get a PUK code from your carrier. For example, if you have AT&T to unlock your SIM card, you can obtain your phone's PUK code from AT&T by:
logging in to your myWireless Account online ● using their Technical Support Chat ● calling Customer Care at 1-800-331-0500 To get your phone's PUK code online from ATT:
Log in to your myWireless Account. ● Select My Services under My Account. ● From the My Services screen, select My Phone/Device. ● Select Unblock SIM Card. ● The Unblock SIM screen will display your PUK code.

Once you receive your PUK code, you will need to enter it into your phone to set a new PIN code. Note: If you enter the wrong ATT PUK code 10 times in a row, your SIM card will be invalidated, and you will need to purchase a new SIM Card. The phone will display the following error: "PUK blocked call operator." There are three other ways to unlock a phone:
The carrier will unlock the phone for you at one of its retail outlets; ● You can do it yourself by clicking on this link Free Unlock Codes , ● Pay $3.89 at the following website: www.theunlockshack.com/.
I trust that this is helpful and solves your problem. All the best

May 21, 2011 | LG Prada KE850 Cellular Phone

1 Answer

My F22 monitor had been appear OSD locked and i don't know how to solve it. Some buddy please help me!!!


important notes
1. what is displayed on the monitor comes from the system unit
2. possible features that could be displayed on the monitor are screen savers or splash screens
3. attempting to log on a computer with a screen saver passcode could lock the system by displaying the word locked requiring unlocking

procedure of unlocking a passcode
1.Once the system locks, would require to reset the password.
2. another function could be displayed on next to the lock icon prompting unlock or reset
3. in the absence of a display of unlocking the password, continue to enter the wrong password and hiting the logon button in a space provided next to the unlock icon prompt
4. severall attempts would prompt for a reset functionality.
5. at which instance would display a password hint of what has been locked.
6. the password hint provided must be guessed correctly to allow a reset functionality.
7. once hint provided allows for reset would prompt the user to create a new password
8. create a password with a hint as a key to reseting any future locked screens.
9. the screen could be operated without a password for an alternative, only made possible during after unlocking the locked screen. instead of creating a new password and hint, choose to disable screen savers altogether.

Dec 06, 2010 | AOC F22 Monitor

Not finding what you are looking for?
Computers & Internet Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Computers & Internet Experts

Doctor PC
Doctor PC

Level 3 Expert

7733 Answers

kakima

Level 3 Expert

102366 Answers

David Payne
David Payne

Level 3 Expert

14161 Answers

Are you a Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...