Question about Lands Phones
Two-handsets -lost the manual and have inadvertantly locked one of them cannot access messages etc
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
SOURCE: OUT OF SERVICE MESSAGE
Apparently that one from Ebay looks nice but has issues (not uncommon). If you took it out of the box, charged it fully and its has garbled audio, then the handset or the base is defective, or both, but at least at this point you can get a handset to "communicate" with the base and the "in/use light turns on, when you try to access a line,correct? . If you get the "out of service" message when trying to "move" the "ebay" handset to the other base, it sounds as if the base station and handsets are "coded" and were married together at the factory and one handset won't interchange with anothers base. However, try this before you go the repair service route, or roll the dice with another fine product off EBay :). Unplug and power down both bases, the one from Ebay and your old one. Take the Ebay handset and set it in the charging cradle of your old base. Power up and wait three minutes. Plug dial tone in and give it a try. If it still says "no service" , and won't light the "in/use" light when you try to use it then it won't work with your base, or/and your old handset you lost is somewhere near and is still communicating with its base. Now if you lost your handset weeks ago, then the odds that it is still alive are pretty slim. But I have heard handsets in the warehouse beep for days til their battery dies. You can google cordess telephone repair for service. Good Luck. CG
Posted on Feb 14, 2008
GE phones are distributed by Thomson Electronics...the manuals are available at:
Posted on Sep 02, 2008
This is possibly caused by the internet connection.
Try new ADSL filter.
You need one each per device.
Posted on Oct 14, 2008
Press menu button, the LED readout should say "press pager button and wait for beep".
I have a GE21900FE1 and it worked perfectly
Posted on Dec 03, 2008
Tips for a great answer:
Mar 03, 2012 | Lands Phones
Aug 20, 2011 | Uniden DECT 6.0 Cordless Telephone...
Jul 29, 2011 | GE 21008GE2 Dual-Handset Cordless...
Jun 20, 2011 | Uniden DECT 6.0 Cordless Phone
Mar 21, 2011 | Uniden DECT 6.0 Cordless Phone ID
Oct 24, 2010 | Vtech 5.8 Ghz Handset Cordless Phone...
Aug 07, 2010 | Uniden Corded Phone with 5.8GHz Cordless...
May 06, 2010 | Uniden 2.4 GHz Expandable Phone System...
Feb 15, 2010 | Uniden Cordless Phone
Jul 17, 2008 | Uniden Lands Phones
Jul 16, 2018 | Uniden Lands Phones
807 people viewed this question
Usually answered in minutes!