Question about Dryers

Open Question

Allen and roth manuals

How to program a remote control for a ceiling fan

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: Minka Aire remote controlled ceiling fan

I have the same problem, except I live in a multi unit condo where many of the occupants own the same fan! You can imagine how  frustrating this is when your fan or light comes on or you can't  agree on a fan speed. Anyway, I spoke to a MinkaAire customer service guy and he tells me that the switches in the receiver are located under the mounting ring. You need to unscrew the ring and it should be located in there. I haven't tried this myself as my fan has a mind of its own as I type and everytime I turn it off to unscrew the mounting ring, the damn thing turns on again. 

Posted on Sep 04, 2008

Ad
  • 1 Answer

SOURCE: Minka Aire remote controlled ceiling fan

I have a newer Minka w/ wall controller. The books says to make sure both the wall control and the receiver(up in the fan) are both programmed the same. My receiver has no little switches but has a sticker stating that you need to hold the 'fan off' button down for 3 seconds after turning on the power so the receiver can memorize the program in the wall switch. You have 60 sec to do this after power is turned on. Good luck !

Posted on Feb 25, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Allen + roth santa ana ceiling fan manual


What kind of wiring diagram are you looking for? fanman9952@aol.com

Mar 10, 2016 | Dryers

1 Answer

Allen + Roth ceiling fan with remote Model #: LP8242LCH. The light randomly turns on. Not touching remote. Any ideas how to fix it?


Change the frequency in the receiver & transmitter. Also, stay away from store brand fans.

Nov 22, 2014 | Dryers

1 Answer

Allen & Roth Eastview ceiling fan. How do I reverse to pull up warm air instead of blowing air down?


Look for a slide switch on the side of the housing beneath the motor. If the manufacturer wired it correctly, the up position will pull up warm air and the down position will blow air down.

Jan 09, 2014 | Dryers

1 Answer

Trying to install an Allen & Roth Ceiling Fan Model#LP8062 Help it doesnt seeem like the light open to change a bulb and the blades dont come off Help?


That's just a CHEAP store brand fan. Take it back and go to a real fan store and get a fan with at least a 13 degree blade pitch or at least 5500 CFM's

Nov 03, 2013 | Dryers

1 Answer

I have a Allen and Roth double ceiling fan and now the light will not turn off by the pull string, so we can not have the fans on with the light off-- ANY HELP?? Its only a year old ;(


The light switch may have failed. They tend to do that.
You don't say whether your fan has a remote control, but that could be the source of your light problem as well

Jul 09, 2013 | Dryers

2 Answers

Need to program Hampton Bay Ceiling fan remote control CHO88T7030T, HELP!


Change the battery. This is the first step when troubleshooting a ceiling fan remote. The easiest fix to any remote control problem begins with battery replacement. A 9-volt battery is needed to operate all Hampton Bay ceiling fan remotes.

Check the light switch used for the ceiling fan. The light switch found on the wall must be in the "on" position. This allows the ceiling fan to be operated by remote control

Re-program your remote. If battery replacement fails to get your remote working again, try to reprogram the remote. Open the battery cover you will see 4 dip switches. These switches must be set to the same position as the receiver on the fan. Use the screw driver to move the dip switches either up or down.

Follow the previous step to change the frequency if the ceiling fan is randomly turning on or off. Other electronic devices such as garage door openers can interfere with the ceiling fans receiver, causing it to randomly turn on or off.



Sep 10, 2011 | Televison & Video

2 Answers

I have a Hampton remote ceiling fan with lights.The Redington 11


the carbon of remote which help to connect the points of remote is not working so purchase the liquid carbon and put on the inner points on remorte buttons
then i feel it strt working.

Apr 29, 2010 | Universal Remote Control Hampton Bay...

Not finding what you are looking for?
Dryers Logo

Related Topics:

1,717 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dryers Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Brad Brown

Level 3 Expert

16174 Answers

Are you a Dryer Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...