Question about Televison & Video

3 Answers

I forgot the password of dany hdtv-600 tv device please tell what to do?

I forgot the password now when i am trying to tune channels it ask for password which i do not remember if i want to disable or change the password it asks for the password again

Posted by Anonymous on

Ad

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

    Mayor:

    An expert whose answer got voted for 2 times.

  • Contributor
  • 1 Answer

Thanks
yes Default password 0000 works i used it and resolved the issue

Posted on May 10, 2014

×

Ad
  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Open the case of device there u saw a bettry remove it for 1 minute
and reinsert.it will recall all the settings.

Posted on Feb 09, 2014

Ad
  • Level 1:

    An expert who has achieved level 1.

    New Friend:

    An expert that has 1 follower.

  • Contributor
  • 1 Answer

How can I reset my device because no display on screen only audio coming

Posted on Apr 25, 2017

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

SOURCE: Sharp LC-52D62U HDTV won't tune-in channel 21.

I finally got Sharp to repair the TV. It was under warenty but they said if the problem wasn't with the TV they were going to charge me for the service call. I told them I wanted a new TV. They sent the tech instead of a new TV. He replaced the turner card and it worked!! Now I get all the channels as well as channel 21.

Posted on Mar 01, 2008

  • 41 Answers

SOURCE: Have a Pioneer PDP508XDA its asks for a password when tuning

Default password is always 0000

Posted on Mar 30, 2009

FixinFax
  • 3085 Answers

SOURCE: I don't have a manual, can't tune the channels,

http://www.vizio.com/support/?SID=jt3livsk2sedoks0p7n577q2o2

Posted on Nov 19, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I forgot the password of dany hdtv-600 tv device please tell what to do?


Default password 0000 works i used it and resolved the issue

Jun 04, 2015 | Cell Phones

1 Answer

User manual required of deny tv device


Try browsing around this attached website for answers. See the attached PDF under downloads to help about Dany devices. HDTV 600 LCD TV Device

Feb 02, 2015 | Computers & Internet

1 Answer

Sound is not working for Dany u1050 usb tv device in using win8


Download and install a Windows 8 compatible driver from the URL below.

www.dodownload.net/drivers/dany-u-1000-1050-2000-usb-tv-drivers.html

Jan 25, 2014 | Computers & Internet

2 Answers

I forgot the password of dany hdtv-550 tv device pleas tell me what to do?


helo sir may i need your help i am lost my dany tv device password and now the device is locked

Feb 05, 2013 | Televison & Video

1 Answer

Need to know how to reset the password forgot the original password to unblock channels


Hi there,

You didn't specify the model number of the TV but many Insignia's TVs use 9999 as a master password which you can use to unblock channels or reset the password if you forget the one you set. 0000 is the default password, but this can't be used after setting your own.

Please try the 2 passwords above. If you are still unable to unlock the TV or need help with changing the password, or parental control settings, please post back with the full model number of your TV for further assistance.

Hope this helps.

Regards,
BElectric

Mar 05, 2011 | Insignia 42" LCD Flat-Panel HDTV

2 Answers

I don't have a manual, can't tune the channels,


Hi,
For instruction manual please click here
Thanks for using fixya.

Nov 19, 2009 | Vizio L32 32 in. LCD HDTV

1 Answer

Can not tune the tv


My dear friend. A TV is a TV and TV's are many and varied. If you stated the model and what it exactly does, maybe I or other people could help you instantly. But since you have said little in relation to TV tuning, then expect a few guys to help you. But allow me to give you a hint that applies to almost all flat panel TV's, ok? Right. On every TV there is a MENU that gives you many options. First you need to press a button on the remote that displays component connection channels and TVincoming signal type. Since I don't know what brand of flat panel TV you have, I can only ask you to find and press the button on the remote that displays on TV screen the following component channels, that is DVT, AVT, Component 1, Component 2, HDTV1, HDTV 2, HDTV 3 and so on. Apart from DTV and ATV, from Component 1 to HDTV 3, these additional channels are for DVD players that also have HDTV outputs and BlueRay players and or Audio devices. If yout TV hasn't got as many channel input, then ignore this part. To tune your TV you have to first press the butoon on the remote to activate the onscreen channel as above, then scroll on DTV or ATV and, depending on whether you have Digital TV in your country or the standard high resolution Analog TV. Lets say you have Digital NTSC format TV system, select it and then press ENTER on your remote. In the menu you find and click SCAN. Depending on where you are, the TV will begin scanning all frequencies in your territory and possible interstates if the modulator is powerful enough to pick up weak signals. Most TV's have an inbuilt set-top box that boost the signal to give you a crystal clear pic. Now, after pressing SCAN, the TV reaches a signal with a clear pic, all you have to do is recognise the channel that comes in view. The instructions on how to save that channel are on screen and then you can configure it as, say channel 4, if the channel that appeared is channel 4, if not, try and recognise what channel had appeared and then configure it with a number, so when you press that number on the remote it will be the same channel you had stored in the TV memory. After you have done this, press scan again and it will scan to the next channel. Once the scanning recognises another clear signal and it is as clear as a baby's face, you have recognised the new channel. Try, find out what channel it is by looking at the screen, there is usually a visible TV station name or number embossed on the lower corner of the screen, once you know what station that is or what channel number it is, configure that number and press ENTER (save) button. Do the same with the remaining channels. Later I will tell you how to skip unwanted blank channels that usually have no signals but snow and lines, or have faint signals that can only be boosted with a TV booster available from reputable TV retailers, or install a bigger more powerful antenna.

Reagards.
Mike

Oct 06, 2009 | Televison & Video

3 Answers

Lock code for Onida Black Dlx channel tunner menu


My Tv is locked and cannot start. it asks for password.
how to open it?

Apr 14, 2009 | Televison & Video

Not finding what you are looking for?
Televison & Video Logo

Related Topics:

2,767 people viewed this question

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

The Knight
The Knight

Level 3 Expert

75178 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17130 Answers

Cindy Wells

Level 3 Expert

5343 Answers

Are you a Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...