Question about Western Digital (WD3200JS) 320 GB Hard Drive

1 Answer

WD hd won't start up when turned on until you plug into usb

A power supply unit came with this player with outputs of 5V DC at 2A
and 12V DC at 2A. What external power source do you recommend for this problem which I sent to you previously. Model of HD is WD3200AAJB

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I cant put a solution for this but try the exact software for the disk which it came with this can help.Im also trying for the software

Posted on Nov 07, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

How to charge it


Hi Stacey
How to charge "what model" Cell Phone

iPhone & others usually charge from the USB cable that it comes with.
Plug into any USB port (5v DC)
Some chargers supply more current which can give a faster charge. iPad chargers supply 2A where as iPhone chargers are 1A

Sep 13, 2015 | Cell Phones

1 Answer

Can I tap a -5v into a BESTEC atx-250-12z-rev d2 power supply ?


The output from the power supply is
Output Max. Load +5Vsb 2A -12V 0.3A +12V 13A +5V 30A -5V 0.3A +3.3V 20A Pin 18 out of 20 white -5 volts (optional)
20 out of 24 white -5 volts (optional) See the definitive connector definition.
All about the various PC power supply cables and connectors

Mar 05, 2015 | Computers & Internet

1 Answer

How can I get a replacement power supply?


What you are after is an AC adapter this model I found on ebay has 120 volts to 240 volts to 12 volts make sure the DC voltage output matches the Voltage of your hard drive. The current output has to be the same amount or larger in value. So if your drive needs 2A a 2A or larger value means it can handle the current load put on it by the Hard drive.
http://www.ebay.com.au/itm/AC-DC-Adapter-For-SimpleTech-96300-40001-001-SimpleDrive-HD-Power-Supply-Cord-/400716519670?pt=US_Monitor_Power_Supplies&hash=item5d4c90d8f6
or
http://www.ebay.com.au/itm/12V-AC-Adapter-For-SimpleTech-Simpledrive-External-Hard-Drive-HD-Power-Supply-/281311386852?pt=Laptop_Adapters_Chargers&hash=item417f771ce4

this one below matches the exact model number of your hard drive
http://www.ebay.com.au/itm/AC-Adapter-For-SIMPLETECH-BOM-No-96300-41001-133-96300-41001-045-96300-41001-073-/400705526395?pt=US_MP3_Player_Chargers_Cradles&hash=item5d4be91a7b

Jun 04, 2014 | Simple Technology 96300-41001-073 1tb...

2 Answers

Linksys wrt54g manual


Power specification depends on the Hardware version
WRT54G 5V 2A
WRT54G V1.1 12V 1A
WRT54G V2 12V 1A
WRT54G V2.2 12V 1A
WRT54G V3 12V 1A
WRT54G V3.1 12V 1A
WRT54G V4 12V 1A
WRT54G V5 12V 0.5A
WRT54G V6 12V 0.5A

Nov 28, 2013 | Computers & Internet

1 Answer

What do they mean the input voltage range between the wall outlet and this adapter is ac 100v-240v, and the adapter's output voltage is DC 5V,2A


A lot of new computer hardware will accept regular 110-115v like most people have in their homes (USA) or high voltage 220 (mostly used for washer / dryers) or industrial use. Like in a factory. This unit accept both without worries of over loading. Some may even have a switch to swap back and forth. It actually only uses 5v and 2amps. Meaning a single 110-115 power strip can handle many plugs, because of the low voltage.

Aug 28, 2012 | ASUS Google Nexus 7 16GB Tablet 71B16

1 Answer

LaCie Hard Disk USB 2.0 1 TB i lost the power


Hello,
this unit is compatible with a few of LaCie power supplies, but it is generally sold with the one providing hte following:
DC Output: 12V (2A) 24W
Regards,

Jan 19, 2011 | LaCie Hard Disk 1TB Desktop with Hi-Speed...

1 Answer

Power cord buzzes and MACPro does not recognize it


This is a fault in the power supply itself, I have just repaired one of these power supplies successfully.
The fault is caused by the failure of the filter capacitors on the 12V supply rail, and if the power supply is left connected to the mains supply (In our case 240V 50Hz) without the drive connected as a load, the unloaded output voltage will exceed the voltage rating of the capacitors, causing their failure. The failed capacitors had very obvious bulges at the top, and one was beginning to leak onto the PCB.

The filter capacitors on the 12V supply rail are rated at 16V, and the cpacitors on the 5V rail are rated at 10V, and when operated without a load, the 12V rail rises to approximately 19V, and the 5V rail rises to approximately 8V. All output filter capacitors are 1000uF, and 105deg C temperature rated.

I repaired my power supply by replacing all of the filter capacitors on the DC low voltage output rails with 1000uF 25V capacitors. Be careful to only fit the 105 deg C rated caps, as they operate at elevated temperatures in an enclosed environment with no ventillation to cool the power supply.
To ensure that the repair was reliable, I also replaced the filter capacitor on the 5V rail with the same 1000uF 25V, even though that capacitor showed no immediate signs of failure.

When reassembling the power supply, care must be taken to ensure that parts like the ferrite cored transformer are thermally bonded to the aluminium heatsink with a smear of heatsink compound.
When the power supply was first powered up following repair, everything was normal, the green power LED came on as usual, the supply outputs both came up OK, and the unit was not making any buzzing sounds, completely silent. The HDD now operated as normal when once again powered from this power supply.

This was the fix for my particular LaCie power supply model ACU057A-0512, and the supply once again works normally.


Tim,
Brisbane Australia.

Mar 12, 2009 | LaCie 500GB d2 Quadra 500 GB USB 2.0 Hard...

1 Answer

PERDI EL CARGADOR DE ENREGIA


Bueno yo tengo un PMP-120 y mi adaptor dice
output: 5V...2A
Y si miras atras del PMP veras en un ticket chico que dice external: DC power supply 5V.

Si tienes otra pregunta me avisas

Saludos,
Vicente (Panama)

May 02, 2008 | iRiver PMP-120 Digital Media Player

1 Answer

MY COMPUTER JUST STOPEED AND I NEED 2 KNOW THE SPECIFACAITIONS ON THE POWER SUPPLY


If you are using latest system you need

Ac input : 220vac 3a 50hz

450watt minimum
Atx 2.03
Atx 12v

Dc output
+5v 28a -5v 0.6a
+12v 15a -12v 0.6a
+3.3v 16a +5vsb 2a

Apr 16, 2008 | Computers & Internet

Not finding what you are looking for?
Western Digital (WD3200JS) 320 GB Hard Drive Logo

Related Topics:

282 people viewed this question

Ask a Question

Usually answered in minutes!

Top Western Digital Computers & Internet Experts

Brian Sullivan
Brian Sullivan

Level 3 Expert

27725 Answers

Marcin

Level 2 Expert

191 Answers

yadayada
yadayada

Level 3 Expert

70347 Answers

Are you a Western Digital Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...