Question about Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson Stylus Pro 9600 vs Agfa Sherpa44

Hello,
I have one Agfa Sherpa44 that really is a Epson Stylus Pro 9600. I want use a espon Inks, but now my printer only accept Agfa Inks. What can I do? there is any solution to convert the printer to a Normal espon 9600? I tryed to download the epson firmewire but didn't accepted it. Maybe I have change de main board of the printer?

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Epson Master
  • 19,396 Answers

The Agfa Sherpa is not manufactured by Epson. Both Epson and Agfa buy and retag their printers from Mutoh.
I do not know if the 44 is the same as Epson 7600 or 9600, but it should fit the same cartridges.

If the printer does not accept the cartridges, that means that there is something different in the software stored in the Epson cartridge chip.

In this case you will be only able to use only Agfa or Mutoh Falcon cartridges.

Posted on Oct 27, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Error 0D050000


Check the cartridges. either any cartridge is dry or empty

Dec 30, 2013 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Stylus Pro 9600. LC damper has a leak and the printhead is clogged. Is there a video or photo spread on how to replace both? The ink line at the damper looses vacume/prime. Thanks...


There is a website www.americaninkjetsystems.com that has pictures posted on how to take apart the Epson 9600 printer and get to the Dampers and Printheads.

Jul 03, 2011 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

I have an Epson Stylus Pro 7600 with a Agfa Sherpa 24M sticker on it. Baught some cartridges from Epson but I get Wrong ink message. Any way to work around this problem?


You need to either buy AGFA cartridges ot apparently you can take the chip off the AGFA cartridge and put it on a Epson or compatible. It will always say it's empty but should still work

Jun 18, 2010 | Epson Stylus Pro 7600 InkJet Printer

1 Answer

9600 not recognizing paper


make sure you use epson paper because epson printers are sensitive, sometimes, using other brand's paper wont work

Feb 10, 2010 | Epson Stylus Pro 9600 InkJet Printer

1 Answer

Epson stylus pro 9600 driver


on site tech service for epson 9600?

Dec 31, 2007 | Epson Stylus Pro 9600 InkJet Printer

3 Answers

Epson 9600 suddendly stopped printing yellow


It's NOT a cartridge if this works... I had a similar problem with a 9600 I bought on eBay that had been inoperable over 18 months. Three colors would NOT clear up after multiple power cleanings. Epson support politely solved the issue at no charge on the phone... he had me drop a few drops of warm water on the pad the printhead rests on when not printing. You have to move the printhead to the left to do that by moving up the little lever near the cutter. The pad is easier to reach with a long eye dropper. I used very warm water- not boiling. I replaced the printhead over the warm water pad for an hour. Then I repeated the process and let it be for another 60 minutes. Then I did a nozzle check and what was gummed up yellow, cyan, and magenta nozzles became clear and it's worked fine since. Good luck!

Oct 10, 2007 | Epson Stylus Pro 9600 InkJet Printer

Not finding what you are looking for?
Epson Stylus Pro 9600 InkJet Printer Logo

531 people viewed this question

Ask a Question

Usually answered in minutes!

Top Epson Printers & Copiers Experts

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Les Dickinson
Les Dickinson

Level 3 Expert

18298 Answers

Cindy Wells

Level 3 Expert

4757 Answers

Are you an Epson Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...