Question about Maxtor Personal Storage 3200 (U01E200) 200 GB Hard Drive

1 Answer

Maxtor 3200 beeps but doesn't work

It now makes a beeping noise like a mobile phone dead tone and is not recoginsed by either my Mac or PC.
Please help.
Thanks

Posted by on

  • 2 more comments 
  • stewartmac42 Nov 13, 2008

    I have the Maxtor Basics 1TB and after opening Drive to listen to Music File it stopped working and now is not recognised by the pc and makes a beeping noise.

  • bobbyangeway Dec 09, 2008

    I had a Maxtor Basics 160GB external HDD. Plug and play immediately with my Sony Vaio, but can't seem to get it work with my Compaq Presario V3000. It immediately emits a beeping sound no matter which USB i plug it. And my Compaq can't detect it, it lags slightly after connected to the MB 160GB.

  • Anonymous Dec 29, 2008

    my maxtor hdd is beeping and the light is still ive only had it for bout a week its weird

  • Honda_23 Mar 24, 2009

    My external has been working fine, took my comp on vacation and when i got back to plug the external back in it doesnt start up. All i hear is a faint clicking, and when i unplug the USB cable and reconnect my comp at first gave me a Code 10 error. I uninstalled the drivers for it but now cant find any drivers for the 3200 200G HD im only finding 3000, 3100 for Win98, or 5000. Ive been seeing on-line that it may have something to do with SP3. Any ideas where to get the drivers? Will the Win98 3100 driver work? im running XP. Im hoping that i can get this solved as i have important info on it that i cant lose.

×

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I have the same problem with an Iomega. After searching for a while i finally found this case report:
http://www.iomegasupportforums.com/phpbb2/viewtopic.php?t=15560&view=next&sid=8fcaf3c05f1bae35c079433c553ee28b
It seems that there is an "Onboard controller failure. It's not putting the drives in JBOD and only displaying one physical drive to your computer. You need to contact technical support about a replacement."
So it seems to be software but it still is a pain in the **** to repair/replace. But maxtor/iomega can charge whatever for a repair because your data is priceless right? sucks

Posted on Mar 23, 2009

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Technician can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Technician (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 91 Answers

SOURCE: Maxtor 3200 beeps but doesn't work

The heads are riding on the platers. The drive is dead and not worth trying to fix. If there is data on it that you simply can not lose do a google search for "data recovery failed harddrive". The rule of thumb for a decent lad that can do this is price, if it costs less then 75$ per meg they probably are not that good.

Posted on Dec 16, 2008

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 1 TB SimpleDrive external USB drive. The drive is now making a repeating, beeping noise, slow and methodical, and it is not recognized by either my MAC or my pc. WHat does the beep-beep-beep mean...


The hard disk inside it doesn't responds to the controller - hardware failure, the disk has failed.
Nothing can fix that, your unit is truly dead and you need a new one.

Apr 30, 2011 | SimpleTech SimpleDrive Portable USB 2.0...

1 Answer

Motarola gp340 does not beep when switched on, can you tell me how to make it beep when you switch it on. Thanks


You will need to go into your settings (sound settings or profile settings which you are using) and enable (turn on) warning tones.

Hope this helps and please rate thanks

P.S if the profile is on silent, there will be no beep. Change profile to general and turn up volumes and enable warning tones.

Mar 23, 2011 | Motorola GP340 Two Way Radio.

1 Answer

I dropped my usb hard drive when it was not connected. It slipped out of its leather pouch and fell from my work desk onto the office carpeted floor. Now it doesn't get detected by my notebook. When...


Hello

Have a look at the link below, it should be of help.

Click HERE to navigate.

Please feel free to let me know of you have any further questions.

Kind regards
Lock123

Aug 30, 2010 | Maxtor Personal Storage 3200 (U01E200) 200...

2 Answers

How do you text on a mobile phone without the beep beep beep every time you enter a character


Hi go to the menu list, scroll to your right till you get to the settings menu,select tone settings, then scroll to keypad tones then select the level you want from 1 - 5,
a volume bar appears move bar to the left, by pressing the square to the left.

" your vote counts, please do vote"

Mar 28, 2010 | Nokia 3310 Cellular Phone

2 Answers

Why does my phone keeps beeping like I have a call waiting?When I am on the phone talking I keep hearing an interruption beep. I have no voicemail messages or text messages and nobody is calling me...what...


hi, to me it sounds like you have got a warning tone switched on then bleeps after every minute, this is a feature on the phone and its just to tell you that you have been on the phone for 1 minute so it helps you work out your charges based on how many times you hear the bleep.
Now it can be turned of you just need to go into the settings and turn the alerts and warning tones off

Mar 26, 2010 | LG Shine CU720 Cellular Phone

2 Answers

Maxtor 3200 300 gig. Drive is not recognized via


reboot the laptop, reseat the cables, and try connecting the drive to different usb port. if that still doesn't work, most likely the drive has gone bad.

Oct 05, 2009 | Maxtor Personal Storage 3200 (U01E200) 200...

1 Answer

Beeping, not showing on computer


Its beeping because its damaged! sad to say but the beeping is an error code! the other downside is hard drives are hard to repair so you may need to buy a new one.

Jun 18, 2009 | Maxtor BASICS Personal Storage 3200...

1 Answer

Keypad tone broblems


Go onto your menu and go to settings, go onto sound or audio and then volume and then go to key tone then select which one you want (or none).

Feb 19, 2009 | Samsung SGH-L760v Cellular Phone

1 Answer

Maxtor 3200 beeps but doesn't work


The heads are riding on the platers. The drive is dead and not worth trying to fix. If there is data on it that you simply can not lose do a google search for "data recovery failed harddrive". The rule of thumb for a decent lad that can do this is price, if it costs less then 75$ per meg they probably are not that good.

Dec 16, 2008 | Maxtor Hard Drive

Not finding what you are looking for?
Maxtor Personal Storage 3200 (U01E200) 200 GB Hard Drive Logo

1,085 people viewed this question

Ask a Question

Usually answered in minutes!

Top Maxtor Computers & Internet Experts

Arora Singh
Arora Singh

Level 2 Expert

180 Answers

Computer Links

Level 3 Expert

2385 Answers

terminalcon

Level 2 Expert

81 Answers

Are you a Maxtor Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...