Question about Printers & Copiers

Open Question

Minolta di 151

I have on minolta di 151 the display language deutch , may i cange it? there is in Italian language?

Posted by on

  • 1 more comment 
  • corradof Oct 27, 2008

    THE GERMAN IS USING WHEN ON DISPLAY COMPARE ANY MESSAGE THE FIRST MESSAGGE IS "BITTE WARTEN"

  • Cynthia Heimsoth
    Cynthia Heimsoth May 11, 2010

    A technician should look at this in person; it could be an administrator code set wrong -- or it could be a bad circuit board. (I'm sorry, I don't have access to service manuals anymore.) If you have access to the service manuals on My Konica-Minolta.com, try looking up "set language"; if it is possible to set the display language it should give instructions there.



    I'm sorry I can't be of more help.

  • Cynthia Heimsoth
    Cynthia Heimsoth May 11, 2010

    Here's a link for the US manual: Di151 English manual

    I'm not sure if the manual is available in other languages; check your local Konica-Minolta website for details.

    I don't see where the display uses any languages; it seems to use codes to indicate problems. Can you give me an example of the "German" it is using?

×

3 Suggested Answers

chibibarako
  • 7 Answers

SOURCE: minolta di 151

You're going to have a tough time finding a paper manual, since Minolta was bought out by Konica. However, if you have Adobe or another PDF reader you can get the manual on the Konica-Minolta website: DI151 Fax Manual

Posted on Oct 24, 2008

  • 5 Answers

SOURCE: minolta di 151 has a problem coping properly, need to know why, replaced toner and still has problem, need either manual or what else could be wrong...

If the printing is poor and almost white copy, you need to replace the developer in the image unit, clean all the lens first to be crystal clear.

Posted on Feb 19, 2010

daevilb
  • 100 Answers

SOURCE: drivers minolta di 151

http://onyxftp.mykonicaminolta.com/download/SearchResults.aspx?productid=310
There you go! :)

Posted on May 05, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Minolta DI-151 trouble code c0500


Sir/Mam Power off the machine. Wait ten seconds then holding down the Stop/Cancel button power on the machine. Clear the code then power off the machine. Wait 10 seconds and power on. If the code comes back you need to look for a new fusing unit (Hot Part) DO not reset the fuser cold catch on fire. That would ruin a perfectly good day!:).

Jan 19, 2015 | Minolta Printers & Copiers

1 Answer

C1300 in minolta di 151


Motor in the print head is out have to replace entire print head. Last I looked the print head was no longer available. Plus an hour or two work Time two get a new copier.

Feb 15, 2013 | Printers & Copiers

1 Answer

How to change display from Japanese to English


4-2. User’s Choice Function Setting Procedure
<Setting Procedure>
1. Press the User Mode key on the control panel and then touch the “User’s Choice” key.
2. Select the page number key that contains the desired function from among 1/6 through 6/6 shown YOURS WOULD BE 1/6
at the bottom of the Touch Panel.
3. Select the function to be set and make settings as required.
4. After the settings are complete, touch the “Enter” key to validate the settings.
NOTE:
The function selected is highlighted.
<Exiting the Mode>
Perform any one of the following steps to go back to the Basic screen.
 Press the Panel Reset key on the control panel.
 Touch “Exit” on the Touch Panel.
Language Selection
English
Select the language of the Touch Panel messages.
French
Dutch Italian Spanish
Portuguese Danish Norwegian
Swedish Finnish Greek
–Metric Areas–
English German French
Japanese Chinese Portuguese

Mar 18, 2010 | Minolta Printers & Copiers

1 Answer

I want to change my konica sitios 7020 printer to english,its in japanese


Procedure
1
Touch 1. System Initial on the Key Operator Mode Screen to display the System
Initial Setting Menu Screen.
2 Touch 2. Language to display the Language Selection Screen.
3 Touch ENGLISH, FRENCH, SPANISH, GERMAN, or ITALIAN
4
Touch OK to complete the setting and return to the System Initial Setting Menu
Screen.
5 Touch RETURN to restore the Key Operator Mode Screen.
6 If no further changes are required, touch RETURN to restore the Basic Screen to
perform copying operations

Jun 11, 2009 | Konica Minolta Printers & Copiers

1 Answer

Minolta di 151 has a problem coping properly, need to know why, replaced toner and still has problem, need either manual or what else could be wrong...


If the printing is poor and almost white copy, you need to replace the developer in the image unit, clean all the lens first to be crystal clear.

May 26, 2009 | Minolta Di151 All-In-One Laser Printer

1 Answer

Change the display language minolta dialta Di-350f


1. User's Choice Function Setting Procedure
<Procedure>
1. Press the Utility key.
2. Touch the “User’s Choice” key.
3. Select the appropriate screen from the menu.
4. Select the appropriate function.
5. After the settings are complete, touch the “Enter” key to validate the settings:

User’s Choice 1/6 Language Selected, (third one down)

May 23, 2009 | Konica Minolta Printers & Copiers

1 Answer

Minolta di 151


You're going to have a tough time finding a paper manual, since Minolta was bought out by Konica. However, if you have Adobe or another PDF reader you can get the manual on the Konica-Minolta website: DI151 Fax Manual

Oct 24, 2008 | Minolta Di151 All-In-One Laser Printer

1 Answer

Error Message on Start up


Avery ld machine try buying one on line and replace the main board achip or up grade

Jan 28, 2008 | Minolta Di151F All-In-One Laser Printer

Not finding what you are looking for?
Printers & Copiers Logo

Related Topics:

29 people viewed this question

Ask a Question

Usually answered in minutes!

Top Printers & Copiers Experts

kakima

Level 3 Expert

96518 Answers

old marine
old marine

Level 3 Expert

1464 Answers

Donald DCruz
Donald DCruz

Level 3 Expert

17129 Answers

Are you a Printer and Copier Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...