Question about Hardware & Accessories

Open Question

How to program a ledtec model it 88 - Hardware & Accessories

Posted by on

  • 1 more comment 
  • miguelmapua
    miguelmapua Jul 14, 2012

    To program the Led Tec Model IT-88:
    It is good to start by clearing off any old info stored in the memory by getting a paper clip and pressing on the masterclear button for a couple of seconds. The screen should light up with all the symbols and numbers for a couple of seconds and the the clock will re-set to 0:00. To set the clock, Press the Clock button simultaneously with the week/hour or minute button until you set the correct day and time. To program the timers, press the timer button, and you will see a 1 and on symbol on the lower left hand side of the screenm this means you are on timer 1 and are going to program the "power on" settings. Press the week, hour and minute buttons till you get the desired day/time of the power on feature. When set, press the timer button again and you will then see the "1 Off" symbol on the lower left of the screen. You will now program the "power off" feature for timer one, just the same way you programmed the timer on feature. Keep pressing the timer button to set the different timers (8 is the max). Once you are set, please make sure the on/auto/off feature is set to "Auto". The display appears on the lower middle portion of the screen. This will allow the timer to work properly. Good luck

  • kamote Nov 07, 2012

    Press the Clock button simultaneously with the week/hour or minute button ==== This means that you must hold press the CLOCK button while pressing the HOUR and MINUTE button

  • Joseph Lao
    Joseph Lao Dec 23, 2013

    I would like to ask a question. I've set my timer already and set it to Auto, but when it's time to turn off, the light won't go off.

×

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 248 Answers

SOURCE: How to program ledtec digital timer

How to Program Digital Timers eHow I hope this may help you out Angelito. I'm a new Fixya agent and thank you and let us know with feedback.

Posted on Jul 14, 2016

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How to program ledtec digital timer


How to Program Digital Timers eHow I hope this may help you out Angelito. I'm a new Fixya agent and thank you and let us know with feedback.

Jul 14, 2016 | Hardware & Accessories

1 Answer

Why do i have 88:88 flashing on my washer (model EIFLW55HIW0)


Unplug the unit for 30 mins. then plug it back in.

Oct 21, 2012 | Electrolux EIFLW55I Washer

1 Answer

When i unplug the timer then reset a new time schedule and plug timer back into wall my timer sets to 88:88. whats am i doing wrong? this timer worked brilliantly until i reset and plugged it back in.


Open following link to identify timer and read instructions:
http://waterheatertimer.org/How-to-program-Utilitec-0155671.html

Timers go bad for many unprovoked reasons.
Check outlet with circuit analyzer.

This timer has 1 year limited warranty.
Extended warranty: If timer is defective, then buy new one from Target or Lowes, and return defective timer in new package.

To review:
Replace AA battery if this model has a battery carriage. Otherwise timer has internal rechargeable battery.
Press reset button with paper clip for a few seconds.
88:88-88 will flash on screen momentarily, and then 12:00 am will display. Timer is ready for programming.
If 88:88-88 does not roll over into the 12:00 am display, try resetting again.
If timer will not hold new programming, and keeps resetting, then see if reset button is stuck.
If timer does not reset and re-program correctly, then timer has gone bad.

Add a comment for more help

Take a moment and rate answer for accuracy:
And take advantage of fixya expert assistance live.
For a price, expert works with you while you work on timer or any do-it-yourself project.
Fixya is always less expensive than a service call.

Sep 23, 2011 | Woods Industries 59377 Indoor Digital...

1 Answer

1983 Delta 88: how much MPG does a 1982 Oldsmobile delta 88 royal...


Personal experience between 13 - 20 for most models with the v-6 and v-8. the 5.7l is about the most fuel efficient at roughly 17

May 17, 2010 | 1983 Oldsmobile Delta 88

1 Answer

Not a real problem, but am wondering if a Delta 88, 1987 model is a front wheel drive vehicle.


1987 olds 88 6 cyl 3.8Liter fuel injected OHV is front wheel drive,1987 olds 88 Custom Cruiser 5.0L V8 4BBL is rear wheel drive.

Nov 19, 2009 | 1987 Oldsmobile Delta 88

1 Answer

Saltwater system code 88 (standby) comes on but can't go further


this is a common problem with 8810s try unplugging for 10 minutes this seems to help reset it

Jun 18, 2009 | Intex Automatic Salt Water System for ...

1 Answer

How to set time


with the power off press down the program button untill the hour flashes then set it press the program button again and do the mins

Aug 02, 2008 | Krups FMF5-14 Stainless Steel 10-Cup...

Not finding what you are looking for?
Hardware & Accessories Logo

Related Topics:

1,590 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hardware & Accessories Experts

Gene Haynes

Level 3 Expert

5089 Answers

Hippy_dd

Level 2 Expert

112 Answers

Brad Brown

Level 3 Expert

15557 Answers

Are you a Hardware and Accessory Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...