Question about Ricoh Aficio 250 Copier

1 Answer

Gestetner 3218 Aficio 180 Fuctional Problem SC 543

  1. I have a Gestetner 3218 Aficio CopyPrinter. It has a functional problem. It displayed fuctional problem SC543. how can now solve this problem. please help me.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Vice President:

    An expert whose answer gotĀ voted for 100 times.

    Sniper:

    An expert who has posted more than 50 answers, of which 90% or more were rated as helpful.

  • Expert
  • 86 Answers

Enter SP mode - Clear button (yellow key), 1 0 7 and hold and press stop button (orange key).
Enter SP5-810 (SC code reset) and select “1”.
Then hold down the “Photo mode” key and the enter key(hash) at the same time for at least 3 seconds (it is not necessary to turn the main switch off andon). If the machine beeps 5 times, the reset was successful. If it only beeps twice, the reset failed, and you need to repair the machine.
Possible causes are the fusing thermistor in the fuser unit, or the power supply unit defective.
Good luck and please rate me, thanks.

Posted on Jan 17, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

SC392 ERROR CODE


There's a video showing how to clear SC error codes: Resetting Ricoh Savin Lanier SC Error Code There's also a discussion here: Thread Ricoh Aficio 220 error SC392

Jun 30, 2014 | Ricoh 885288 Black Copier Toner Cartridge...

1 Answer

MY GESTETNER 3218 AFICIO FUNCTIONAL PROBLEM SC 320. HOW CAN I SOLVE THE PROBLEM


SC 320 - Polygon motor error.
The polygon motor does not reach its operating speed within 10 sec. after the polygon motor on signal,or the lock signal is not detected for more than 40 ms continuosly during operation.
Possible causes polygon motor defective,poor conection of the interface harness which connects the polygon motor driver and the IOCSS board, IOCSS bboard defective.
The SC can be reset by turning the main switch OFF and ON if the SC was caused by a sensor error.
To reset SC press yellow key 1 - 0 - 7 and STOP ( red ) key for 3 seconds,enter in the SP mode, enter SP 5-810 ( SC code reset) and select "1".Then hold down the Photo mode key and the # key at the same time for at least 3 seconds(this does not require the main switch to be turned off and on).

Aug 22, 2012 | Ricoh Aficio 250 Copier

1 Answer

While trying to print, my Gestetner DSc435 is displaying a functional probelm sc560.


Some expert may give the exact answer but according to my knowledge SC 5XX error code series indicates a problem in fuser or paper feeding sections.

Aug 29, 2011 | Ricoh Aficio 450 Copier

1 Answer

Fuctional problems sc402. ricoh aficio 150


SC402: Transfer roller leak error 2
A transfer roller current leak signal is detected.
The current feedback signal for the transfer roller is not detected.

- Possible causes -
  • · High voltage supply board defective
  • · Poor connection of the PCU
  • · Transfer/separation unit set incorrectly
  • · Transfer roller damaged

Jan 26, 2011 | Ricoh Aficio 150 Copier

2 Answers

Service call sc:543 for Ricoh Aficio 1515mf


plz do like this after again it shwos same then need to replace parts thermister,and thermal fuses. press the yellow 107 red and hold the red for two mints it shows copy sp.......like switch off on

Mar 25, 2009 | Ricoh Aficio 1515MF All-In-One Laser...

2 Answers

Service mode


call service --- possible bad thermistor (fuser)
could over heat

Mar 17, 2009 | Ricoh Aficio SP C410DN Laser Printer

1 Answer

Gestetner 3245 copy machine


You have a problem in the heater, sensors detected temps over 220c for more than 6 seconds. It will be an expensive repair. Most likely around $400 parts plus labor. Not something for the average Joe to troubleshoot.

Aug 21, 2008 | Gestetner Office Equipment & Supplies

1 Answer

Product Gestetner 3245 It has sc 543-00 problem


Fusing overheat error.  It may require a thermistor or a new lamp.  Prices vary by dealer.  You would have to contact a dealer in your area to find out.

Aug 21, 2008 | Gestetner DSm645 Digital Imaging System

Not finding what you are looking for?
Ricoh Aficio 250 Copier Logo

866 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...