Question about Ricoh Aficio 250 Copier

2 Answers

Aficio 180 Functiobnal problem SC543

  1. The Gestetner 3218 Aficio 180 has a funcyional problem. Dislayed fuctional problem SC543

Posted by on

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

SC546 Fuser temp. not steady falls or increases 10 durring standby.
Reset fuser and some other error codes by Enter SP 5-810 and select 1 press and hold photomode key while
holding photomode key press (#) key

Posted on Jan 29, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I help sc 546 fusur

Posted on Nov 12, 2008

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What to do with error sc543?


fuser error will need to fix fuser first then reset code

Oct 08, 2014 | Ricoh Aficio SP C231SF SPC231SF SP C232SF...

1 Answer

Aficio spc242 service call sc543


There may still be small fragments of the paper jammed in the machines roller system that you might be able to get to.
At worsethe roller has teeth busted on the gears and pulleys.

Aug 03, 2014 | Ricoh Aficio SP-C242SF - 21 PPM Flatbed...

1 Answer

Error sc543


replace the thermistor and thermostatic some time maye be power supply

Aug 08, 2013 | Ricoh Aficio 1018D All-In-One Laser...

1 Answer

MY GESTETNER 3218 AFICIO FUNCTIONAL PROBLEM SC 320. HOW CAN I SOLVE THE PROBLEM


SC 320 - Polygon motor error.
The polygon motor does not reach its operating speed within 10 sec. after the polygon motor on signal,or the lock signal is not detected for more than 40 ms continuosly during operation.
Possible causes polygon motor defective,poor conection of the interface harness which connects the polygon motor driver and the IOCSS board, IOCSS bboard defective.
The SC can be reset by turning the main switch OFF and ON if the SC was caused by a sensor error.
To reset SC press yellow key 1 - 0 - 7 and STOP ( red ) key for 3 seconds,enter in the SP mode, enter SP 5-810 ( SC code reset) and select "1".Then hold down the Photo mode key and the # key at the same time for at least 3 seconds(this does not require the main switch to be turned off and on).

Aug 22, 2012 | Ricoh Aficio 250 Copier

1 Answer

Tengo na Impresora Ricoh Aficio 250 y me aparece en pantalla (PROBLEMA SC543) y no me Copias Sacar vu. les agradeceria me ayuudaran Con Este Problema


SC543 is caused by a defective Fusing thermistor. check or replace both center and end thermistor this will solve your problem

Nov 25, 2010 | Ricoh Aficio 250 Copier

1 Answer

The wrench icon is on and code SC543-00 show up in the screen


That code indicates a fuser overheat error or hot roller fusing lamp overheat. Refer to your manual if you have it. Good luck.

Mar 16, 2009 | Ricoh Aficio 355 All-In-One Laser Printer

1 Answer

Gestetner 3218 Aficio 180 Fuctional Problem SC 543


Enter SP mode - Clear button (yellow key), 1 0 7 and hold and press stop button (orange key).
Enter SP5-810 (SC code reset) and select “1”.
Then hold down the “Photo mode” key and the enter key(hash) at the same time for at least 3 seconds (it is not necessary to turn the main switch off andon). If the machine beeps 5 times, the reset was successful. If it only beeps twice, the reset failed, and you need to repair the machine.
Possible causes are the fusing thermistor in the fuser unit, or the power supply unit defective.
Good luck and please rate me, thanks.

Oct 27, 2008 | Ricoh Aficio 250 Copier

Not finding what you are looking for?
Ricoh Aficio 250 Copier Logo

804 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ricoh Office Equipment & Supplies Experts

quennie732

Level 2 Expert

393 Answers

OfficeServiceAjnc
OfficeServiceAjnc

Level 2 Expert

183 Answers

Bernard D'Souza

Level 2 Expert

161 Answers

Are you a Ricoh Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...