NEC Versa S970 is telling us that it cant find the boot system. Notebook not working

https://support.necam.com/download/200669-000low.pdf

Go to the store and purchase a good copy of Windows XP and install it from a disk. In the BIOS you should have the option of booting from external devices as a alternative as well. This would mean USB or any plug and play drive. Make sure it is set to boot to this fist boot. Really I would just go and get a copy of Windows XP it should be relatively cheap now since there is no real support or at least it is dying out or has died for support updates. If you can purchase the original boot and software for your computer from the factory as well.

I would also strongly suggest you take it in to the pro and have them do it less hassle for you if you have not done this a lot.

"pleas use it for good and Knowledge to help ". Use Herin's boot cd tools to run Active password changer and remove the pass word then log in to solve the system.

No, it's embedded on the mainboard.

need to change the boot seq in BIOS....
u need to press one of the foll...
DEL, F1, Esc, key etc as the case may be...immediatly after switching on the PC....
once u r in BIOS screen look for "Boot Seq" in one of the BIOS setup screens....
change the boot seq to CD ROM as 1st boot device...and HDD to 2nd boot device...
press F10 or choose BIOS "save and exit " option....
insert the XP cd...switch off and switch on...it should now boot from CD....
all the best....pls revert back...pls give a rating and feedback for this advice....thanks

may be this can help you

if not contact me support@itindiasupportonline.com

press f8 goto enable vga

after login just set the resolution into 800x600 then
restart the laptop in normal mode

or els contact me

try to reformat hard drive

If you still have the recovery partition on your hard drive, boot whilst holding the f11 key, this will start NEC recovery and will allow you to reinstall the system, drivers included. If not, you'll have to visit:
http://www.nec-computers.com.sg/
to download the drivers you need. Good luck!

when the bluetooth and wlan light are off press the wireless button three times and wait a sec and it will work. thats what nec told me