Question about Sport & Outdoor - Others
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the plug is ussaly no more than a wooden dowel that fits inside the spring and is the approx length of the shells put end to end like they would be in the tube
Posted on Oct 12, 2009
You first need to **** the gun then remove the fore end and barrel and look at the breech face when pulling trigger , you will see if firing pin is there. If not u need a new pin as it is probably broken. Take it to gunsmith if u are not familiar with the workings and get a new pin .
Posted on Oct 27, 2009
The barrel should be all you need to clean, to do this just run a snake down the barrel and pull out the other end. Unless it is a semi-auto then you should not ever have to clean internal mechanisms.
Posted on Nov 03, 2009
Testimonial: "Thank you for your quick response. Very helpful as it kept me from trying to take apart something that is better left alone. Appreciate your time..."
Europe loads 2 1/2" and 2 3/4" shells for 16 gauge shotgun as standard and the US only loads 2 3/4" shells. If your shotgun chambers the 2 3/4" shells it should be OK. You can measure the chamber and see if it measures 2 3/4". You can also check your barrel for and bulges in it by looking down the barrel with a bore light shinning down the other end. A bulge should be able to be seen with the eye. If your gun has any bulge, do not fire it again. You will need a new barrel. But It should be OK and I would not expect their to be any bulges.
Posted on Nov 14, 2009
Testimonial: "I goofed my 1st try so here goes again. Advice was very helpful to a neophyte; knowledgeable, understandable & timely---Thanks a bunch! KW "
Tips for a great answer:
Mar 06, 2017 | Optics
Mar 04, 2017 | Optics
Dec 01, 2015 | Optics
Jun 01, 2015 | Optics
Sep 28, 2014 | Boating
Oct 28, 2011 | Winchester (026196062448) (20 - 60x70 mm)
Feb 28, 2010 | Optics
90 people viewed this question
Usually answered in minutes!